Progress Lighting P3408-0930K9 Fitter 1 Light LED Flush Mount with AC Module Instruction Manual

Introduzzjoni

This manual provides detailed instructions for the safe installation, operation, and maintenance of your Progress Lighting P3408-0930K9 Fitter 1 Light LED Flush Mount with AC Module. Please read all instructions carefully before beginning installation and retain this manual for future reference.

Image: Progress Lighting P3408-0930K9 Fitter 1 Light LED Flush Mount in Brushed Nickel finish.

Informazzjoni dwar is-Sigurtà

TWISSIJA: Risk of electric shock. Disconnect power at the circuit breaker or fuse box before installation or servicing. Do not attempt installation if you are not familiar with electrical wiring. Consult a qualified electrician.

• Aqra l-istruzzjonijiet kollha bir-reqqa qabel l-installazzjoni.
• Ensure the electrical supply is disconnected before handling the fixture.
• Il-konnessjonijiet kollha tal-wajers għandhom ikunu skont il-kodiċijiet elettriċi lokali u nazzjonali.
• Taqbiżx il-vol speċifikattage (120 Volts).
• Dan l-apparat huwa ddisinjat għall-użu fuq ġewwa biss.

Kontenut tal-Pakkett

Iċċekkja li l-komponenti kollha huma preżenti qabel tibda l-installazzjoni:

• LED Flush Mount Fixture (with integrated AC Module)
• Dell tal-ħġieġ
• Mounting Hardware Kit (screws, wire nuts, mounting strap)
• Manwal ta' Istruzzjoni

Għodod Meħtieġa (Mhux Inklużi)

• Tornavit tar-ras Phillips
• Tornavit Flathead
• Strippers tal-Wajer
• Tnalji
• Tejp Elettriku
• Nuċċalijiet tas-Sigurtà

Setup u Installazzjoni

Follow these steps to properly install your LED flush mount fixture:

1. Itfi l-Enerġija: Sib is-circuit breaker jew il-kaxxa tal-fjusijiet u itfi l-provvista tal-enerġija lill-kaxxa tal-junction fejn se jiġi installat l-apparat. Ivverifika li l-provvista tal-enerġija hija mitfija billi tuża voltagtester.
2. Ipprepara l-Immuntar: Attach the mounting strap to the junction box using the provided screws. Ensure the strap is securely fastened.
3. Konnessjonijiet tal-Wiring:
   • Qabbad il- iswed wajer mill-apparat sal- iswed wajer (sħun) mill-kaxxa tal-junction billi tuża skorfina tal-wajer.
   • Qabbad il- abjad wajer mill-apparat sal- abjad wajer (newtrali) mill-kaxxa tal-junction billi tuża skorfina tal-wajer.
   • Qabbad il- art wajer mill-apparat sal- art wire from the junction box (or to the green ground screw on the mounting strap) using a wire nut.
   • B'attenzjoni daħħal il-wajers kollha fil-kaxxa tal-junction.
4. Waħħal l-Apparat: Align the fixture base with the mounting strap and secure it with the provided mounting screws. Ensure the fixture is flush against the ceiling.
5. Installa Glass Shade: Carefully attach the glass shade to the fixture according to the specific design. Typically, this involves twisting or securing with decorative nuts.
6. Irrestawra l-Enerġija: Erġa' ixgħel il-kurrent mis-circuit breaker jew mill-kaxxa tal-fjużijiet.

Image: Product dimensions for installation planning. The fixture measures approximately 9.25 inches in diameter and 4.63 inches in height.

Immaġni: Eżamples of flush mount light fixture placement in various rooms, including hallways, living areas, bedrooms, and utility spaces.

Istruzzjonijiet Operattivi

Once installed, operate your LED flush mount fixture as follows:

• Power On/Off: Use a standard wall switch connected to the fixture's electrical circuit to turn the light on or off.
• Dimming: This fixture is dimmable when used with a compatible wall dimmer switch. Ensure your dimmer switch is rated for LED lighting to prevent flickering or damage.

Image: Visual representation indicating the fixture is dimmable when connected to a compatible wall dimmer.

Manutenzjoni

The Progress Lighting P3408-0930K9 features an integrated LED AC module, meaning there are no bulbs to replace. Maintenance is minimal:

• Tindif: To clean the fixture, ensure power is off. Wipe the metal parts with a soft, dry cloth. Clean the glass shade with a mild glass cleaner and a soft cloth. Avoid abrasive cleaners or solvents.
• Spezzjoni: Spezzjona l-apparat perjodikament għal xi sinjali ta’ ħsara jew konnessjonijiet laxki. Jekk issib xi problemi, skonnettja l-provvista tal-enerġija u kkonsulta elettriċista kwalifikat.

Issolvi l-problemi

If you encounter issues with your fixture, refer to the following common problems and solutions:

Speċifikazzjonijiet

Detailed specifications for the Progress Lighting P3408-0930K9 Fitter 1 Light LED Flush Mount:

• Numru tal-Mudell: P3408-0930K9
• Ditta: Progress Progress
• Kulur: Nikil brushed
• Materjal: Azzar Liga, Ħġieġ
• Stil: Kontemporanju
• Formola ta' Tagħmir tad-Dawl: Qrib il-Limitu
• Dimensjonijiet tal-Prodott: 9.25"T x 9.25"W x 4.63"Għ
• Użu fuq ġewwa/barra: Ġewwa
• Sors tal-Enerġija: Corded Elettriku
• Tip ta' Installazzjoni: Immonta bil-flus
• Tip ta' Sors tad-Dawl: Integrated LED (AC Module)
• Numru ta' Sorsi tad-Dawl: 1
• Voltage: 120 Volts
• Kulur ħafif: Abjad sħun (3000K)
• Luminożità: 1211 Lumens
• Wattage: 17 Watts
• Indiċi tar-Rendiment tal-Kulur (CRI): 90
• Dimmable: Yes, with compatible wall dimmer
• Assemblaġġ Meħtieġa: Iva
• Pajjiż ta' Oriġini: Iċ-Ċina
• UPC: 785247189168

Image: Key LED specifications including 90 CRI for accurate color rendering and 3000K for a warm white light output.

Informazzjoni dwar Garanzija

This Progress Lighting P3408-0930K9 Fitter 1 Light LED Flush Mount is covered by a garanzija ta 'sena from the date of purchase. This warranty covers defects in materials and workmanship under normal use. Please retain your proof of purchase for warranty claims. For specific terms and conditions, refer to the warranty documentation included with your product or contact Progress Lighting customer support.

Appoġġ għall-Klijent

If you have any questions regarding the installation, operation, or maintenance of your Progress Lighting fixture, please contact Progress Lighting customer support. You can find contact information on the official Progress Lighting websit jew permezz tal-bejjiegħ bl-imnut tiegħek.

Riżorsi onlajn: Għal aktar informazzjoni u appoġġ, żur il- Progress Lighting Store on Amazon.