Introduzzjoni
This manual provides detailed instructions for the installation, operation, and maintenance of your Progress Lighting P6071-31 outdoor wall lantern. Please read this manual thoroughly before beginning installation or use to ensure proper function and safety.
For your safety, always follow local electrical codes and consult a qualified electrician if you are unsure about any part of the installation process.
Informazzjoni dwar is-Sigurtà
TWISSIJA: Always turn off power at the main circuit breaker before installing, cleaning, or servicing this fixture. Failure to do so may result in serious injury or death.
ATTENZJONI: Dan il-prodott għandu jiġi installat skont il-kodiċi tal-installazzjoni applikabbli minn persuna familjari mal-kostruzzjoni u t-tħaddim tal-prodott u l-perikli involuti.
IMPORTANTI: Inspect wire insulation for any cuts, abrasions, or exposed copper that may have occurred during shipping. If there is a defect in the wire's insulation, do not attempt installation. Contact customer service.
This fixture is designed for outdoor use and is suitable for wet locations. Ensure all connections are properly sealed to prevent water intrusion.
Kontenut tal-Pakkett
Iċċekkja li l-komponenti kollha huma preżenti qabel tibda l-installazzjoni.
- Assemblea tal-Apparat tad-Dawl
- Mounting Hardware Kit (screws, wire nuts, mounting strap)
- Istruzzjonijiet għall-installazzjoni
Figura 1: Sploda view of the P6071-31 outdoor wall lantern components.
Speċifikazzjonijiet
| Attribut | Valur |
|---|---|
| Brand | Progress Progress |
| Mudell | P6071-31 |
| Kulur | Iswed |
| Materjal | Aluminju |
| Stil | Tradizzjonali |
| Formola ta' Tagħmir tad-Dawl | Ħajt |
| Dimensjonijiet (madwar) | Height: 9-1/8", Width: 5-1/2", Depth from wall: 6-1/2" |
| Tip ta' bozza | Incandescent, 100W Medium Base (Max) |
| Voltage | 120V |
| Klassifikazzjoni tal-post | cCSAus Wet location listed |
Figure 2: Product dimensions for the P6071-31 fixture.
Setup u Installazzjoni
Before you begin, ensure the power is turned off at the circuit breaker. This fixture is designed for wall mounting over a standard 4" hexagonal recessed outlet box.
Prepare the Mounting Strap: Attach the mounting strap to the outlet box using the provided mounting screws. Ensure the strap is securely fastened.
Agħmel Konnessjonijiet elettriċi:
- Connect the bare copper or green ground wire from the fixture to the green ground screw on the mounting strap.
- Connect the white wire from the fixture to the white (neutral) supply wire using a wire nut.
- Connect the black wire from the fixture to the black (hot) supply wire using a wire nut.
- B'attenzjoni daħħal il-wajers kollha fil-kaxxa tal-ħruġ.
Immonta l-Apparat: Align the fixture with the mounting strap and secure it with the provided mounting screws. Ensure the fixture is flush against the wall and sealed to prevent water entry, especially in wet locations.
Installa l-Bozza: Screw in a medium base incandescent bulb (max 100W) into the socket. Do not overtighten.
Irrestawra l-Enerġija: Erġa' ixgħel il-kurrent mis-circuit breaker prinċipali.
Figure 3: Installation diagram for the P6071-31 outdoor wall lantern.
Istruzzjonijiet Operattivi
Once installed and power is restored, the fixture can be operated via the wall switch connected to the circuit. This fixture does not include a built-in switch or sensor.
- Ensure the light bulb is securely screwed into the socket.
- Use a standard wall switch to turn the light fixture on or off.
- For optimal performance and longevity, use bulbs within the specified wattagfirxa e.
Manutenzjoni
Regular maintenance will help preserve the appearance and functionality of your outdoor wall lantern.
Tindif: To clean the fixture, turn off the power at the circuit breaker. Wipe the fixture with a soft, damp cloth. Do not use abrasive cleaners or solvents as they may damage the finish or glass. For glass panels, a mild glass cleaner can be used.
Sostituzzjoni tal-bozza: Turn off the power at the circuit breaker and allow the bulb to cool before replacing. Unscrew the old bulb and screw in a new medium base incandescent bulb (max 100W). Do not exceed the maximum wattage.
Spezzjoni: Periodically inspect the fixture for any signs of wear, damage, or loose connections. Ensure the seal around the mounting surface remains intact to prevent water intrusion.
Figure 4: The P6071-31 fixture, showing details of the finish and glass for cleaning reference.
Issolvi l-problemi
If you encounter issues with your fixture, refer to the following common problems and solutions:
| Problema | Kawża Possibbli | Soluzzjoni |
|---|---|---|
| Id-dawl ma jixgħelx. |
|
|
| Teptip ħafif. |
|
|
| L-apparat jagħmel ħsejjes. |
|
|
Garanzija u Appoġġ
Dan il-prodott huwa kopert minn a Garanzija Limitata ta' sena from the date of purchase. This warranty guarantees your complete satisfaction and includes professional after-sales customer service support.
For warranty claims, technical assistance, or any questions regarding your Progress Lighting P6071-31 fixture, please contact Progress Lighting customer service. Please have your model number (P6071-31) and proof of purchase ready when contacting support.
You can find more information and contact details on the official Progress Lighting websit: www.progresslighting.com
