1. Introduzzjoni
The Behringer UMC202HD is a 2-input, 2-output USB audio interface designed for recording microphones and instruments directly to your computer. It features Midas-designed mic preamplifiers and supports high-resolution audio up to 24-Bit/192 kHz, ensuring professional sound quality for your recordings.
Stampa 1: Quddiem view of the Behringer UMC202HD audio interface, showing inputs, gain controls, and output section.
2. Setup
2.1 Installazzjoni tas-sewwieq
Before connecting the UMC202HD, ensure you install the necessary drivers for your operating system (Windows or macOS). Drivers are typically available on the Behringer website. The device is compatible with popular recording software including Avid Pro Tools*, Ableton Live*, and Steinberg Cubase*.
2.2 Konnessjoni mal-Kompjuter
Connect the UMC202HD to your computer using a standard USB cable. The device is bus-powered, meaning it draws power directly from your computer via the USB connection.
2.3 Konnessjoni ta' Mikrofoni u Strumenti
Use XLR cables for microphones and 1/4-inch TRS cables for instruments (guitars, basses, keyboards) to connect to Input 1 and Input 2 on the front panel. Ensure the correct input type (Line/Inst) is selected via the switches above the gain knobs.
2.4 Connecting Headphones and Monitors
Plug your headphones into the 1/4-inch PHONES jack on the front panel. Connect your studio monitors to the 1/4-inch TRS outputs on the rear panel.
3. Operating the UMC202HD
3.1 Gwadan Kontroll
Adjust the GAIN knobs for Input 1 and Input 2 to set the input level for your microphones or instruments. The CLIP and SIG LEDs indicate signal presence and clipping. Aim for a strong signal without clipping (red CLIP LED).
3.2 Qawwa Phantom (+48V)
For condenser microphones, activate the +48V PHANTOM POWER switch located on the front panel. This supplies the necessary power to the microphone. Ensure your microphone requires phantom power before activating this feature.
3.3 Monitoraġġ Dirett
Engage the DIRECT MONITOR switch to hear your input signal directly through your headphones or monitors with zero latency. This is useful for monitoring your performance without delay from your computer's software.
3.4 Output Level Adjustment
Use the OUTPUT knob to control the overall volume of your studio monitors. The PHONES knob adjusts the volume for your headphones.
4. Karatteristiċi ewlenin
- Midas-Designed Preamps: Equipped with two world-class Midas-designed mic preamplifiers for exceptional audio quality.
- Awdjo b'Riżoluzzjoni Għolja: Supports 24-Bit/192 kHz converters for detailed and accurate sound reproduction.
- Monitoraġġ ta' Latency Zero: Direct Monitor function allows for real-time monitoring of inputs without delay.
- Qawwa fantasma: +48V phantom power for condenser microphones.
- Kostruzzjoni robusta: Features a "Built-like-a-tank", impact-resistant metal chassis for durability.
- Kompatibilità Universali: Works with Windows and macOS operating systems and major DAWs.
5. Manutenzjoni
- Tindif: Use a soft, dry cloth to clean the exterior of the device. Avoid liquid cleaners or solvents.
- Ambjent: Operate the device in a clean, dry environment away from extreme temperatures, humidity, and direct sunlight.
- Ġestjoni tal-Kejbil: Ensure all cables are properly connected and not under strain to prevent damage to ports or cables.
6 Issolvi l-problemi
- Ebda Ħsejjes: Check all cable connections, ensure drivers are installed correctly, verify input/output selections in your DAW, and confirm volume levels on the UMC202HD and your computer.
- Ħoss Mgħawġ: Reduce input gain to prevent clipping (red CLIP LED), check for faulty cables, and ensure sample rate settings match between the device and your DAW.
- Apparat Mhux Rikonoxxut: Reconnect the USB cable, try a different USB port, ensure drivers are up-to-date, and restart your computer.
7. Speċifikazzjonijiet
- Piż tal-oġġett: 1.19 liri
- Dimensjonijiet tal-Prodott: 9.92 x 6.22 x 3.46 pulzieri
- Numru tal-Mudell tal-Oġġett: UMC202HD
- Apparati Kompatibbli: Laptop, Kompjuter Personali, Pillola
- Interface tal-ħardwer: USB
- Software appoġġjat: Avid Pro Tools, Ableton Live, Steinberg Cubase
- Tip ta' Materjal: Metall
- Sistema Operattiva: Windows, macOS
- Teknoloġija tal-Konnettività: USB
- Numru ta' kanali: 2
8. X'hemm fil-Kaxxa
- Behringer UMC202HD Audiophile 2x2, 24-Bit/192 kHz USB Audio Interface
9. Vidjows Uffiċjali tal-Prodott
Product Summary Video
Vidjo 1: Ħarsa fil-qosorview of the Behringer UMC202HD audio interface, highlighting its main features and design.
10. Garanzija u Appoġġ
The Behringer UMC202HD comes with a manufacturer's warranty. For detailed warranty information, technical support, or service inquiries, please refer to the documentation included with your product or visit the official Behringer websit.
