Manwal tal-Utent tal-Ispeakers Bluetooth li Jiżfnu fl-Ilma Hype HY-BTWTR-BLK Hydro Sound

1. Introduzzjoni

Grazzi tax-xiriasing the Hype HY-BTWTR-BLK Hydro Sound Bluetooth Water Dancing Speakers. These speakers combine high-quality audio with a dynamic water and light show, enhancing your listening experience. This manual provides essential information for the safe and efficient operation of your new speakers.

2. Informazzjoni dwar is-Sigurtà

• Aqra l-istruzzjonijiet kollha bir-reqqa qabel l-użu.
• Do not expose the speakers to extreme temperatures, direct sunlight, or high humidity.
• Keep the speakers away from water sources to prevent electrical shock, as they are not waterproof.
• Do not attempt to disassemble or modify the speakers. This will void the warranty and may cause damage.
• Uża biss il-kejbil tal-iċċarġjar provdut jew wieħed ekwivalenti ċċertifikat.
• Żomm fejn ma jintlaħaqx mit-tfal.

3. Kontenut tal-Pakkett

Jekk jogħġbok iċċekkja l-pakkett għall-oġġetti li ġejjin:

• Hype Hydro Sound Bluetooth Water Dancing Speakers (2 units)
• Cable tal-Iċċarġjar tal-USB
• Cable Awdjo 3.5mm
• Manwal għall-Utent (dan id-dokument)

4. Prodott Aktarview

Familiarize yourself with the components of your Hype Water Dancing Speakers.

Stampa 1: Quddiem View of Speakers. This image displays the front of two Hype Hydro Sound Bluetooth Water Dancing Speakers. Each speaker features a clear, conical top housing the water and light elements, and a black base containing the speaker driver and control button. The water jets are visible within the clear section, ready to synchronize with audio.

Immaġni 2: Wara View of Speaker. This image shows the rear panel of one Hype Hydro Sound Bluetooth Water Dancing Speaker. From left to right, the visible ports and controls include a 5V DC charging input, an AUX input for wired connections, and a power switch/button. These elements facilitate charging and connectivity options for the speaker.

Komponenti tal-Ispeaker:

• Water Jet Chamber: Clear top section where water and LED lights create the dancing effect.
• Sewwieq tal-Ispeaker: Located in the base for audio output.
• Buttuna tal-Qawwa: Jixgħel/jitfi l-ispikers.
• Input 5V DC: Għall-iċċarġjar tal-batterija interna.
• Input AUX: For wired audio connection using the 3.5mm cable.

5. Setup

5.1 Charging the Speakers

1. Connect the small end of the USB charging cable to the 5V DC input port on the back of one speaker.
2. Qabbad it-tarf l-akbar tal-kejbil USB ma' adapter tal-enerġija USB (mhux inkluż) jew mal-port USB tal-kompjuter.
3. Id-dawl indikatur tal-iċċarġjar (jekk preżenti) jixgħel waqt l-iċċarġjar u jintefa meta jkun iċċarġjat kompletament.
4. A full charge typically takes 2-3 hours and provides approximately 5 hours of playback.

Nota: Both speakers are powered by a single connection. Ensure both speakers are connected to each other via the integrated cable for full functionality.

5.2 Tixgħel/Jitfi

• To power on, press and hold the Power button on the main speaker until you hear an audible prompt or see an indicator light.
• Biex titfi, agħfas u żomm il-buttuna tal-Enerġija mill-ġdid.

6. Istruzzjonijiet Operattivi

6.1 Tqabbil tal-Bluetooth

1. Ensure the speakers are powered on and within 10 meters (33 feet) of your Bluetooth-enabled device.
2. The speakers will automatically enter pairing mode, indicated by a flashing LED light.
3. On your device (smartphone, tablet, laptop), go to the Bluetooth settings and search for available devices.
4. Select "HY-BTWTR-BLK" or a similar name from the list.
5. Ladarba jkun imqabbad, tisma' ħoss ta' konferma, u d-dawl LED jieqaf iteptep.
6. The speakers will automatically reconnect to the last paired device when powered on, if the device's Bluetooth is active and within range.

6.2 Konnessjoni tad-Dħul AUX

For devices without Bluetooth or for a wired connection:

1. Connect one end of the 3.5mm audio cable to the AUX input port on the back of the speaker.
2. Connect the other end of the 3.5mm audio cable to the headphone jack or audio output of your device.
3. The speakers will automatically switch to AUX mode.

6.3 Music Playback and Water Dancing

• Once connected via Bluetooth or AUX, start playing music on your connected device.
• The water jets inside the speakers will begin to dance and light up in multiple colors, synchronizing with the beat and volume of the music.
• Adjust the volume from your connected device.

7. Manutenzjoni

• Tindif: Use a soft, dry cloth to wipe the exterior of the speakers. Do not use abrasive cleaners or allow water to enter any openings.
• Ħażna: When not in use for extended periods, store the speakers in a cool, dry place away from direct sunlight.
• Kura tal-batterija: To prolong battery life, fully charge the speakers before storing them for long periods and recharge them every 3-6 months.

8 Issolvi l-problemi

9. Speċifikazzjonijiet

• Mudell: HY-BTWTR-BLK
• Tip ta' Kelliem: Desktop
• Konnettività: Bluetooth, 3.5mm AUX
• Apparati Kompatibbli: Laptop, Smartphone, Tablet
• Kulur: Iswed
• Piż tal-Prodott: 200 Gramm
• Li ma jgħaddix ilma minnha: Nru
• Sors tal-Enerġija: Batterija Rechargeable Interna
• Wattage: 3 Watts
• Ħajja medja tal-batterija: Sa 5-il Siegħa
• Dimensjonijiet tal-Prodott: 10 x 4 x 4 cm (per speaker, approximate)

10. Garanzija u Appoġġ

Hype products are designed for reliability and performance. This product comes with a standard manufacturer's warranty against defects in materials and workmanship. Please refer to the warranty card included in your original packaging for specific terms and conditions.

For technical support, warranty claims, or further assistance, please contact Hype customer service through their official webis-sit jew il-bejjiegħ bl-imnut minn fejn inxtara l-prodott. Żomm il-prova tax-xiri tiegħek għall-validazzjoni tal-garanzija.