Introduzzjoni
Thank you for choosing the ANSMANN Powerline 5 Pro Charger. This advanced microprocessor-controlled charger is designed for NiMH/NiCd rechargeable batteries, offering multiple charging programs and comprehensive safety features. Please read this manual carefully before using the device to ensure safe and optimal performance.
Istruzzjonijiet tas-Sigurtà
- Use the charger only for NiMH/NiCd rechargeable batteries. Do not attempt to charge primary (non-rechargeable) batteries.
- Tesponix il-ċarġer għax-xita jew l-umdità.
- Tiżżarmax jew timmodifikax il-ċarġer. Irreferi kull manutenzjoni lil persunal kwalifikat.
- Żgura ventilazzjoni xierqa waqt l-iċċarġjar.
- Żomm fejn ma jintlaħaqx mit-tfal.
- Evita short-circuiting tal-kuntatti tal-batterija.
- Skonnettja l-ċarġer mill-plagg tal-elettriku meta ma jkunx qed jintuża.
Prodott Overview
The ANSMANN Powerline 5 Pro is a versatile battery charger featuring an LCD display and individual charging slots. It supports various battery sizes and offers multiple operational modes.
Figura 1: Quddiem view of the ANSMANN Powerline 5 Pro Charger, showing the LCD display, control buttons (Current, Display, Mode), and four charging slots for cylindrical batteries, plus a dedicated slot for a 9V E-block battery.
Karatteristiċi ewlenin:
- Applikazzjoni versatili: Charges 1-4 NiMH/NiCd batteries of sizes Micro AAA, Mignon AA, Baby C, Mono D, and one 9V E-block battery.
- Teknoloġija tal-Iċċarġjar Intelliġenti: Four charging programs (Charge, Discharge, Refresh, Test) individually adjustable per charging station.
- Sigurtà Għolja: Features reverse polarity protection, short circuit protection, overcharge protection, and automatic shut-off.
- Easy-to-read Display: Large illuminated LCD shows capacity, voltage, charging/discharging current, and charging time for each slot.
- Użu konvenjenti: Includes wide-range power supply for worldwide use and a 12V car adapter.
Kontenut tal-Pakkett
Malli tiftaħ il-pakkett, jekk jogħġbok ivverifika li l-komponenti kollha huma preżenti u mhux imħassra:
- ANSMANN Powerline 5 Pro Charger Unit
- AC Power Adapter (Wide-range)
- Adapter tal-Karozza 12V
- Manwal għall-Utent (dan id-dokument)
Figure 2: The Powerline 5 Pro charger shown with its included accessories: the AC power adapter and the 12V car adapter.
Setup
Konnessjoni tal-Provvista tal-Enerġija:
- Locate the DC 12V 1.5A input port on the rear of the charger.
- Connect the provided AC power adapter or 12V car adapter to this input port.
- Plug the other end of the AC power adapter into a suitable wall outlet, or the car adapter into your vehicle's 12V socket.
- The charger's LCD display will illuminate, indicating it is powered on and ready for use.
Figura 3: Wara view of the Powerline 5 Pro charger highlighting the 12V 1.5A DC input port for connecting the power adapter.
Istruzzjonijiet Operattivi
Daħħal Batteriji:
The charger supports various battery sizes. Ensure correct polarity when inserting batteries into the charging slots. The 9V E-block battery has a dedicated slot.
Figure 4: Illustration showing the various battery types suitable for the Powerline 5 Pro charger, including Micro AAA, Mignon AA, Baby C, Mono D, and 9V E-Block.
Understanding the Display and Controls:
The LCD display provides real-time information for each charging slot. The three buttons (Current, Display, Mode) allow you to control the charging process.
- Current Button: Adjusts the charging/discharging current.
- Buttuna tad-displej: Toggles through different display parameters (e.g., voltage, capacity, time).
- Buttuna tal-Modalità: Selects the desired operating program (Charge, Discharge, Refresh, Test).
Figure 5: The Powerline 5 Pro charger with batteries inserted, demonstrating the individual monitoring and automatic shutdown features. The LCD shows charging status.
Charging Programs:
Each charging slot can operate independently with its own program.
- Ħlas: Standard charging mode. Insert battery, select desired current with "Current" button, then press "Mode" to start. The charger automatically detects full charge and switches to trickle charge.
- Ħruġ: Discharges the battery before recharging it. Useful for reducing memory effect in NiCd batteries. Select "Discharge" mode with "Mode" button, then set discharge current with "Current" button. After discharge, the charger will automatically begin charging.
- Aġġorna: Repeatedly discharges and charges the battery to optimize its capacity and rejuvenate older batteries. This process can take several hours or even days depending on battery condition. Select "Refresh" mode with "Mode" button.
- Test: Charges the battery fully, then discharges it to measure its actual capacity, and finally recharges it. This provides an accurate reading of the battery's health. Select "Test" mode with "Mode" button.
To select a program for a specific slot, first select the slot by pressing the "Display" button until the desired slot is highlighted, then use the "Mode" button to cycle through programs. Use the "Current" button to adjust current settings if applicable.
Manutenzjoni
- Clean the charger regularly with a soft, dry cloth. Do not use abrasive cleaners or solvents.
- Ensure the charging contacts are free of dust and debris for optimal connection.
- Aħżen il-ċarġer f'post frisk u niexef meta ma tkunx qed tuża.
- Evita li twaqqa’ l-ċarġer jew li tissottomettih għal impatti qawwija.
Issolvi l-problemi
| Problema | Kawża Possibbli | Soluzzjoni |
|---|---|---|
| Il-ċarġer mhux qed jixgħel. | Ebda provvista tal-enerġija; adapter difettuż; konnessjoni maħlula. | Check power outlet; ensure adapter is securely connected to charger and wall/car socket; try a different outlet. |
| Battery not charging (display shows "ERR"). | Incorrect battery type (non-rechargeable); faulty battery; incorrect polarity; poor contact. | Ensure battery is NiMH/NiCd; try a different battery; reinsert battery with correct polarity; clean battery and charger contacts. |
| Charging process takes too long. | High capacity battery; low charging current selected; battery in "Refresh" or "Test" mode. | This is normal for high capacity batteries; increase charging current if possible; "Refresh" and "Test" modes are designed to take longer. |
| Id-displej huwa mċajpar jew qed jitteptep. | Provvista tal-enerġija instabbli. | Ensure stable power source; try a different outlet or adapter. |
Speċifikazzjonijiet
| Karatteristika | Dettall |
|---|---|
| Numru tal-Mudell | 1001-0018 |
| Tipi ta' Batteriji Kompatibbli | NiMH / NiCd (Micro AAA, Mignon AA, Baby C, Mono D, 9V E-block) |
| Input Voltage | 12V DC, 1.5A (via included AC adapter or car adapter) |
| Charging Programs | Charge, Discharge, Refresh, Test |
| Wiri | LCD b'dawl ta 'wara |
| Karatteristiċi tas-Sigurtà | Reverse polarity protection, short circuit protection, overcharge protection, automatic shut-off |
| Dimensjonijiet tal-Prodott | 5.59 x 6.67 x 1.56 pulzieri (14.2 x 17.0 x 3.96 ċm) |
| Piż tal-oġġett | 1.21 liri (0.55 kg) |
| Manifattur | ANSMANN |
Figure 6: Dimensions of the Powerline 5 Pro charger, indicating a width of 17.0 cm and a height of 14.2 cm.
Garanzija u Appoġġ
ANSMANN products are manufactured with high quality standards. For warranty information and technical support, please refer to the official ANSMANN webis-sit jew ikkuntattja lis-servizz tal-konsumatur tagħhom direttament. Żomm l-irċevuta tax-xiri tiegħek bħala prova tax-xiri.
Għal aktar għajnuna, tista' żżur il- Ansmann Store on Amazon.
