Stayer SCE 1650 WMC Miter Saw User Manual

1. Introduzzjoni

This manual provides essential information for the safe and effective operation, maintenance, and troubleshooting of your Stayer SCE 1650 WMC Miter Saw. This versatile tool is designed for precise cutting of various materials including iron, aluminum, plastic, and wood. Please read this manual thoroughly before initial use and keep it for future reference.

2. Istruzzjonijiet tas-Sigurtà

Dejjem segwi l-prekawzjonijiet bażiċi ta’ sigurtà biex tnaqqas ir-riskju ta’ nar, xokk elettriku, u korriment personali. Jekk ma ssegwix dawn l-istruzzjonijiet, dan jista’ jirriżulta fi korriment serju.

• Aqra l-Istruzzjonijiet Kollha: Familiarize yourself with the tool's controls and proper use.
• Ilbes Protezzjoni tal-Għajnejn: Dejjem ilbes gogils tas-sigurtà jew nuċċalijiet tas-sigurtà b'tarki tal-ġenb.
• Ilbes Protezzjoni tas-Smigħ: Uża tappijiet tal-widnejn jew earmuffs waqt l-operazzjoni.
• Biċċa tax-Xogħol Sikura: Dejjem clamp jew inkella waħħal il-biċċa tax-xogħol biex tevita li tiċċaqlaq waqt it-tqattigħ.
• Żomm Idejn Ċar: Qatt m'għandek tpoġġi idejk ħdejn ix-xafra tat-tqattigħ.
• Żomm Żona tax-Xogħol Nadif: Żoni imbarazz jistiednu inċidenti.
• Toperax f'Atmosferi Splussivi: Tużax power tools fil-preżenza ta' likwidi jew gassijiet li jaqbdu.
• Unplug Before Adjustments: Always disconnect the saw from the power source before making any adjustments, changing accessories, or performing maintenance.
• Use the Correct Blade: Ensure the blade is appropriate for the material being cut and is sharp and undamaged.
• Evita li tlaħħaq iżżejjed: Żomm livell tajjeb u bilanċ f'kull ħin.

3. Prodott Aktarview

The Stayer SCE 1650 WMC is a robust miter saw featuring a durable aluminum base and upper table. It includes an electronic speed variator for optimized cutting across different materials.

Figura 1: Fuqview of the Stayer SCE 1650 WMC Miter Saw. This image shows the complete miter saw unit, highlighting its red base, silver cutting table, and the main motor housing with the blade guard. The adjustable fence and clamping mechanisms are also visible.

Komponenti Ewlenin:

• Aluminum Base and Upper Table: Provides stability and durability.
• Electronic Variator: Allows adjustment of blade speed.
• Mekkaniżmu ta' inklinazzjoni: Enables bevel cuts up to 45°.
• Swiveling Table: Features self-locking positions for miter cuts at 22.5°, 45°, and 90°.
• Port tal-Estrazzjoni tat-Trab: For connecting a dust collection system.

4. Setup

Qabel ma tħaddem is-serrieq tal-mitra, kun żgur li tkun imwaħħla u mwaħħla sew.

1. Spakkjar: Carefully remove all components from the packaging. Verify that all included items are present: SCE 1650 WMC miter saw, Widia TCT Z-52 blade, parallel guide, 2 horizontal clamps, and service wrench.
2. Immuntar: Securely mount the miter saw to a stable workbench using appropriate fasteners.
3. Installazzjoni tax-xafra: Ensure the Widia TCT Z-52 blade (Ø 254 x 3 x 30 mm) is correctly installed and tightened according to the instructions provided with the blade. Always unplug the saw before installing or changing blades.
4. Parallel Guide and Clamps: Install the parallel guide and horizontal clamps as needed for your specific cutting task to secure the workpiece.
5. Estrazzjoni tat-Trab: Connect a suitable dust extraction system to the designated port to maintain a clean work environment.

5. Istruzzjonijiet Operattivi

The Stayer SCE 1650 WMC is designed for precise cuts in various materials. Always ensure the workpiece is stable and secured before cutting.

5.1. Power and Speed Control

• The saw operates at 1600W power.
• Use the electronic variator to adjust the no-load speed between 2500 and 4000 RPM (Giri/min) depending on the material being cut. Lower speeds are generally suitable for harder materials or larger cuts, while higher speeds are for softer materials or finer finishes.

5.2. Making Cuts

1. Straight Cuts (0°): Position the workpiece against the fence. Ensure the swiveling table is locked at 0°. Maximum cutting capacity: 50 x 100 mm.
2. Miter Cuts (Angled Horizontal Cuts): Adjust the swiveling table to the desired angle (e.g., 22.5°, 45°). The table has self-locking positions for common angles. Maximum cutting capacity at 45°: 32 x 100 mm.
3. Bevel Cuts (Angled Vertical Cuts): Tilt the saw head up to 45° to the left or right. Maximum cutting capacity at 45° inclined: 150 x 20 mm or 90 x 50 mm.
4. Compound Cuts (Miter and Bevel): Combine miter and bevel adjustments for complex angles. Maximum cutting capacity at 45° miter and 45° bevel: 75 x 20 mm.
5. General Cutting Capacity:
   • 90° (Straight): 155 x 25 mm / 65 x 77 mm
   • 45° Right/Left (Miter): 103 x 30 mm / 55 x 77 mm
   • 45° Inclined (Bevel): 150 x 20 mm / 90 x 50 mm
   • 45° Compound (Miter & Bevel): 75 x 20 mm
6. Operazzjoni: Lower the blade slowly into the workpiece, allowing the blade to reach full speed before contact. Apply steady, even pressure. Once the cut is complete, allow the blade to stop rotating before raising it from the workpiece.

6. Manutenzjoni

Regular maintenance ensures the longevity and safe operation of your Stayer SCE 1650 WMC Miter Saw. Always unplug the tool before performing any maintenance.

• Tindif: Regularly clean dust and debris from the saw, especially around the motor vents, blade guard, and cutting table. Use compressed air for hard-to-reach areas.
• Spezzjoni tax-xafra: Inspect the blade before each use for sharpness, cracks, or missing teeth. Replace dull or damaged blades immediately.
• Spezzjoni tal-Pinzell: The motor uses brushes. Periodically inspect the carbon brushes for wear and replace them when they are worn down to their limit. Refer to a qualified service technician if unsure.
• Lubrikazzjoni: Apply light machine oil to moving parts and pivot points as recommended in a more detailed service manual (if available) or as needed to ensure smooth operation.
• Iċċekkja tal-Qafliet: Iċċekkja perjodikament il-ġewż, il-boltijiet u l-viti kollha għall-issikkar. Issikka kwalunkwe qafliet maħlula.

7 Issolvi l-problemi

Din it-taqsima tindirizza kwistjonijiet komuni li tista' tiltaqa' magħhom bis-serrieq tal-mitra tiegħek.

8. Speċifikazzjonijiet

Technical specifications for the Stayer SCE 1650 WMC Miter Saw:

• Mudell: SCE1650WMC
• Qawwa: 1600 W
• Voltage: 230 Volt (AC)
• Veloċità mingħajr tagħbija: 2500 – 4000 RPM (Giri/min)
• Dijametru tax-xafra: Ø 254 mm
• Toqba tax-xafra: 30 mm
• Materjal tax-xafra: Tungsten Carbide (Widia TCT Z-52)
• Sors tal-Enerġija: Corded Elettriku
• Piż: 16.5 kg
• Cutting Capacity (Max):
  • 90° (Straight): 155 x 25 mm / 65 x 77 mm
  • 45° Right/Left (Miter): 103 x 30 mm / 55 x 77 mm
  • 45° Inclined (Bevel): 150 x 20 mm / 90 x 50 mm
  • 45° Compound (Miter & Bevel): 75 x 20 mm

9. Garanzija

STAYER products are manufactured to high-quality standards. This product comes with a standard manufacturer's warranty against defects in materials and workmanship. Please refer to the warranty card included with your product or visit the official STAYER websit għal termini u kundizzjonijiet dettaljati tal-garanzija. Żomm il-prova tax-xiri tiegħek għal talbiet ta' garanzija.

10. Appoġġ

For technical assistance, spare parts, or service inquiries, please contact your local STAYER dealer or authorized service center. You can also visit the official STAYER website for further support information and contact details.

Websit: www.stayer.es (Eżample, attwali URL jista' jvarja)