1. Introduzzjoni
This manual provides detailed instructions for the safe and proper installation and operation of your Mounting Dream MD2377 Full Motion TV Wall Mount. This mount is designed to securely hold most 26-55 inch OLED/LED/Plasma TVs weighing up to 60 lbs, with a maximum VESA pattern of 400x400mm.
Please read all instructions carefully before beginning installation. If you have any questions or require assistance, contact Mounting Dream customer service.
Immaġni 1.1: Fuqview of the Mounting Dream MD2377 Full Motion TV Wall Mount and included accessories.
2. Informazzjoni dwar is-Sigurtà
- Kapaċità tal-piż: Teċċedix il-kapaċità massima tal-piż ta' 60 lbs (27.2 kg).
- Daqs tat-TV: Dan il-muntatura huwa adattat għal televiżjonijiet bejn 26 u 55 pulzier.
- Tip ta' Ħajt: This mount is designed for installation on wood studs, concrete walls, or brick walls. Tinstallax fuq drywall waħdu.
- Installazzjoni professjonali: If you are unsure about the installation process or the suitability of your wall, consult a qualified professional.
- Għodod: Ensure you have all necessary tools and follow safety precautions when using them.
- Tfal: Żomm it-tfal 'il bogħod miż-żona tal-installazzjoni waqt is-setup.
Image 2.1: Important warning indicating that the mount should not be installed on drywall alone. Suitable wall types include single wood studs and concrete/brick walls (which may require additional anchors).
3. X'hemm fil-Kaxxa
Iċċekkja li l-komponenti kollha huma preżenti qabel tibda l-installazzjoni:
- Assemblea tal-Muntanja tat-TV
- Livell tal-bużżieqa manjetiku
- Velcro Cable Ties
- Manwal tal-Istruzzjoni tal-Installazzjoni
- Lag Bolts (for wall mounting)
- TV Screws (various sizes for TV attachment)
- Spacers (for TV attachment)
- Washers (for TV attachment)
- Allen Key (for adjustments)
4. Verifika tal-Kompatibbiltà
Before installation, ensure this mount is compatible with your television and wall structure:
- Disinn VESA tat-TV: Check the VESA mounting holes on the back of your TV. This mount supports VESA patterns from 75x75mm (3x3 inches) up to 400x400mm (16x16 inches).
- Piż tat-TV: Confirm your TV's weight (without its stand) does not exceed 60 lbs (27.2 kg). Refer to your TV's manual for its exact weight.
- Daqs tat-TV: This mount is designed for TVs ranging from 26 to 55 inches.
- Inputs Imblukkati: Before attaching the mounting brackets to your TV, ensure they will not block any input ports or cables. Spacers are provided to create clearance if needed.
- Wall Stud Spacing: If mounting to wood studs, ensure the stud spacing is compatible with the wall plate. The mount allows for lateral adjustment to center the TV.
Image 4.1: Universal VESA pattern compatibility, illustrating minimum and maximum dimensions.
Image 4.2: Guide on how to measure and check the VESA mounting holes on your TV.
Image 4.3: Illustration demonstrating how to check for potential cable outlet blockage by the mounting brackets.
5. Setup u Installazzjoni
Follow these general steps for installation. Refer to the detailed instruction sheet included in your package for specific diagrams and hardware usage.
- Waħħal il-Brakketti mat-TV: Secure the vertical TV brackets to the back of your television using the appropriate screws, washers, and spacers from the provided hardware kit. Ensure they are tightened securely.
- Immuntar il-Pjanċa tal-Ħajt mal-Ħajt: Locate the desired mounting position on your wall. Use a stud finder to identify wood studs or ensure you are drilling into solid concrete/brick. Mark pilot holes and drill according to the instructions. Secure the wall plate assembly to the wall using the lag bolts. Remember: Tinstallax fuq drywall waħdu.
- Iddendel it-TV fuq pjanċa tal-ħajt: Carefully lift the TV (with attached brackets) and hook it onto the wall plate. Ensure the TV is securely seated. Engage any safety locking mechanisms as per the detailed instructions.
Image 5.1: Visual representation of the three main installation steps: attaching brackets to the TV, mounting the wall plate, and hanging the TV.
6. Istruzzjonijiet Operattivi
The MD2377 mount offers various adjustments for optimal viewing:
- Estensjoni u Irtirar: The mount can extend your TV up to 17.1 inches (434mm) from the wall and retract it back to 3.1 inches (79mm). Gently pull or push the TV to adjust the distance.
- Aġġustament tal-inklinazzjoni: Adjust the TV tilt angle from 5° upwards to 15° downwards to reduce glare or achieve a preferred viewing angle. Use the provided Allen key to loosen/tighten the tilt mechanism.
- Aġġustament tad-dawran: Swivel your TV left or right up to ±90° (maximum swivel angle depends on TV size) to direct the screen towards your viewing żona.
- Livellar wara l-Installazzjoni: A ±3° post-installation adjustment allows for fine-tuning the TV's level after it has been mounted. Use the provided Allen key to make these adjustments.
- Immuntar tal-kantuniera: This mount is suitable for corner installations, especially for smaller TVs within the specified size range. The maximum swivel angle will vary based on the TV's dimensions.
Image 6.1: Illustration of the mount's flexible extension and retraction capabilities.
Image 6.2: Visual guide for adjusting the TV's tilt angle.
Image 6.3: Illustration of the TV's swivel range for flexible viewing.
Image 6.4: Guide for performing minor leveling adjustments after the TV is mounted.
Immaġni 6.5: Eż.ample of the TV mount installed in a corner, highlighting its adaptability.
7. Manutenzjoni
To ensure the longevity and safe operation of your TV wall mount:
- Spezzjoni regolari: Iċċekkja perjodikament il-viti u l-konnessjonijiet kollha biex tiżgura li jibqgħu ssikkati u siguri.
- Tindif: Naddaf il-muntatura b'ċarruta ratba u niexfa. Evita prodotti tat-tindif jew solventi li joborxu li jistgħu jagħmlu ħsara lill-finitura.
- Lubrikazzjoni: If movement becomes stiff, a small amount of silicone-based lubricant can be applied to the articulating joints.
8 Issolvi l-problemi
Jekk tiltaqa' ma' problemi waqt jew wara l-installazzjoni, ikkunsidra dan li ġej:
- TV Mhux Livell: Use the post-installation leveling adjustment (Section 6) to correct any slight tilt. Ensure the wall plate was installed level initially.
- Diffikultà biex Tiċċaqlaq il-Muntatura: Check that all adjustment screws are not overtightened. Apply lubricant if necessary (Section 7).
- Il-Muntanja Tħossha Instabbli: Immediately remove the TV and re-check all wall and TV connections. Ensure lag bolts are fully secured into studs or appropriate anchors. Review wall type compatibility (Section 2 & 4).
Għal aktar assistenza, jekk jogħġbok ikkuntattja lis-servizz tal-klijenti ta' Mounting Dream.
9. Speċifikazzjonijiet
| Karatteristika | Speċifikazzjoni |
|---|---|
| Numru tal-Mudell | MD2377 |
| Daqsijiet tat-TV Kompatibbli | 26 - 55 pulzieri |
| Kapaċità massima tal-piż | 60 lbs (27.2 kg) |
| Kompatibilità VESA | 75x75mm sa 400x400mm |
| Tip ta 'Immuntar | Full Motion, Swivel, Tilt, Articulating |
| Angolu Mejjel | +5° / -15° |
| Angolu li jdur | ±90° (TV size dependent) |
| Estensjoni mill-Ħajt | 3.1 inches (79mm) to 17.1 inches (434mm) |
| Invellar ta' wara l-installazzjoni | ± 3° |
| Materjal | Azzar Liga |
| Dimensjonijiet tal-Prodott | 17.13 x 16.54 x 3.07 pulzieri |
| Piż tal-oġġett | 7 liri |
10. Appoġġ għall-Klijent
Mounting Dream offers US-based customer service to assist with any questions or concerns you may have regarding your MD2377 TV wall mount. Please refer to the contact information provided in your product packaging or visit the official Mounting Dream websit għall-appoġġ.
