Manwal tal-Utent taċ-Ċiklokompjuter tar-Roti bil-Fili MACH b'14-il Funzjoni

1. Introduzzjoni

This manual provides detailed instructions for the installation, operation, and maintenance of the MACH 14-Function Wired Bicycle Cyclocomputer, model Mach Bike Computer 14. This device is designed to help cyclists track various performance metrics accurately. Please read this manual thoroughly before using the cyclocomputer to ensure proper setup and functionality.

This image displays the MACH 14-Function Wired Bicycle Cyclocomputer unit. It features a clear LCD screen showing '0.0 Km/h' for speed and '0:00:00' for time, along with 'Avs' and 'TM' indicators. Below the screen are two control buttons labeled 'SET' and 'MODE'.

2. Kontenut tal-Pakkett

Malli tiftaħ il-pakkett, jekk jogħġbok ivverifika li l-komponenti kollha huma preżenti:

• MACH 14-Function Cyclocomputer Unit
• Wired Speed Sensor
• Kalamita tar-rota
• Mounting Bracket with Cable
• Cable Ties for installation
• Manwal għall-Utent (dan id-dokument)

3. Setup u Installazzjoni

3.1. Mounting the Cyclocomputer

1. Attach the mounting bracket to your bicycle's handlebar or stem using the provided cable ties. Ensure it is securely fastened and positioned for easy viewing.
2. Slide the cyclocomputer unit onto the mounting bracket until it clicks into place.

3.2. Installing the Speed Sensor and Magnet

1. Mount the speed sensor on the front fork, ensuring it faces the wheel spokes. Use cable ties to secure it.
2. Attach the magnet to a spoke on the front wheel. Position the magnet so that it passes within 5mm of the speed sensor with each wheel rotation.
3. Route the sensor cable along the fork and frame, securing it with cable ties, to the cyclocomputer unit. Plug the sensor cable into the cyclocomputer.

3.3. Initial Settings: Wheel Circumference

Accurate speed and distance readings depend on correct wheel circumference input. Refer to your bicycle tire's sidewall for the circumference in millimeters (e.g., 2100mm for a 700x23c tire) or measure it manually.

1. Agħfas il- SET buttuna biex tidħol fil-mod ta 'l-issettjar.
2. The wheel circumference value will flash. Use the MODALITÀ button to adjust the digits.
3. Agħfas SET to confirm each digit and move to the next.
4. Once the correct circumference is entered, press SET again to save and exit the setting mode.

4. Istruzzjonijiet Operattivi

The MACH 14-Function Cyclocomputer features two buttons: SET u MODALITÀ. Il- MODALITÀ button cycles through different display functions, while the SET button is used for configuration and resetting values.

4.1. Functions Overview

• Real-time Speed (SPD): Displays your current cycling speed.
• Average Speed (AVS): Shows the average speed of your current ride.
• Maximum Speed (MXS): Records the highest speed achieved during your current ride.
• Elapsed Time (TM): Tracks the duration of your current ride.
• Total Distance (ODO): Displays the cumulative distance traveled since the last reset of the odometer.
• Partial Distance (DST): Juri d-distanza koperta fil-vjaġġ attwali.
• 12/24h Conversion: Allows selection between 12-hour and 24-hour clock formats.
• Auto Start/Stop: The cyclocomputer automatically starts recording when motion is detected and pauses when stationary.
• Bidu/Waqqaf Manwali: Provides an option to manually control the start and stop of recording.
• Arloġġ: Juri l-ħin kurrenti.
• Km/Miles Unit Selection: Switch between kilometers per hour (Km/h) and miles per hour (Mph) for speed and distance units.
• LCD Auto-off: The display automatically turns off after a period of inactivity to conserve battery.
• Funzjoni tal-ISKENJAR: Automatically cycles through various display functions (e.g., DST, MXS, AVS, TM) at regular intervals.
• Wheel Circumference Setting: (Refer to Section 3.3 for initial setup) This setting can be re-accessed to adjust the wheel circumference if needed.

4.2. Navigating Functions

Agħfas il- MODALITÀ button repeatedly to cycle through the available display functions. The current function will be indicated on the screen.

4.3. Resetting Values

To reset trip-specific values (e.g., Partial Distance, Average Speed, Maximum Speed, Elapsed Time), navigate to the desired function and press and hold the SET button for a few seconds until the value resets to zero.

Nota: The Total Distance (ODO) is generally not reset through this method to maintain a cumulative record. Consult troubleshooting if an ODO reset is required.

5. Manutenzjoni

• Tindif: Wipe the cyclocomputer unit with a soft, damp drapp. Tużax tindif jew solventi li joborxu.
• Reżistenza għall-Ilma: The unit is designed to be resistant to splashes and light rain. Avoid submerging it in water.
• Sostituzzjoni tal-batterija: When the display becomes dim or erratic, the battery may need replacement. Typically, this involves opening the battery compartment on the back of the unit and replacing the old battery with a new CR2032 coin cell battery. Ensure correct polarity.
• Sensor and Magnet Check: Periodically check that the speed sensor and magnet are securely mounted and properly aligned (within 5mm distance).

6 Issolvi l-problemi

7. Speċifikazzjonijiet