Genuine Nissan 24080-EA200 Battery Cable Assembly User Manual

Introduzzjoni

This manual provides essential instructions for the proper installation, maintenance, and troubleshooting of your Genuine Nissan 24080-EA200 Battery Cable Assembly. Please read this manual thoroughly before proceeding with installation to ensure safe and correct usage.

Informazzjoni dwar is-Sigurtà

TWISSIJA: Working with automotive batteries and electrical systems can be hazardous. Improper handling can lead to severe injury, electric shock, burns, or damage to the vehicle. Always follow these safety precautions:

Ilbes tagħmir protettiv personali xieraq, inklużi nuċċalijiet u ingwanti tas-sigurtà.
Kun żgur li l-ignition tal-vettura tkun mitfija u li l-brejk tal-ipparkjar ikun attivat.
Disconnect the negative (-) battery terminal first, then the positive (+) terminal. When reconnecting, connect the positive (+) terminal first, then the negative (-) terminal.
Evita kuntatt mal-aċidu tal-batterija. Jekk iseħħ kuntatt, laħlaħ immedjatament bl-ilma u fittex attenzjoni medika.
Do not smoke or allow open flames near the battery. Batteries produce flammable hydrogen gas.
Consult a qualified automotive technician if you are unsure about any step.

Kontenut tal-Pakkett

Iċċekkja li l-komponenti kollha huma preżenti u mhux imħassra qabel tibda l-installazzjoni.

1 x Genuine Nissan 24080-EA200 Battery Cable Assembly

Image 1: The Genuine Nissan 24080-EA200 Battery Cable Assembly, showing the positive terminal connector, the main cable, and the integrated fuse/junction box.

Installazzjoni

This section outlines the general procedure for replacing the positive battery cable assembly. Specific vehicle models may have variations. Refer to your vehicle's service manual for detailed instructions.

Għodod Meħtieġa:

Wrench set (typically 10mm, 12mm, 13mm, 14mm)
Battery terminal cleaner (wire brush)
Dielectric grease (optional, for corrosion prevention)
Nuċċalijiet u ingwanti tas-sigurtà

Proċedura:

Ipprepara l-Vettura: Ensure the vehicle is off and the parking brake is engaged. Open the hood and locate the vehicle battery.
Disconnect Negative Terminal: Using an appropriate wrench, loosen the nut on the negative (-) battery terminal. Carefully remove the negative cable and secure it away from the battery to prevent accidental contact.
Disconnect Positive Terminal: Loosen the nut on the positive (+) battery terminal. Carefully remove the old positive battery cable assembly.
Disconnect from Vehicle: Trace the positive battery cable assembly from the battery to its connection points on the vehicle (e.g., starter, fuse box, alternator). Disconnect all attachment points and remove the old assembly. Note the routing for correct reinstallation.
Terminali Naddaf: Use a battery terminal cleaner to remove any corrosion from the battery posts. Ensure a clean, conductive surface.
Installa Assemblea Ġdida: Carefully route the new Genuine Nissan 24080-EA200 Battery Cable Assembly in the same manner as the old one. Connect all attachment points to the vehicle components, ensuring they are secure.
Connect Positive Terminal: Attach the new positive (+) battery cable terminal to the positive (+) battery post. Tighten the nut securely, but do not overtighten.
Connect Negative Terminal: Attach the negative (-) battery cable terminal to the negative (-) battery post. Tighten the nut securely.
Apply Dielectric Grease (Optional): Apply a thin layer of dielectric grease to the battery terminals to help prevent corrosion.
Ivverifika l-Konnessjonijiet: Iċċekkja darbtejn il-konnessjonijiet kollha biex tiżgura li huma ssikkati u sikuri.

Kontrolli ta' wara l-Installazzjoni

Wara l-installazzjoni, wettaq il-kontrolli li ġejjin:

Ibda l-Vettura: Attempt to start the vehicle. If it starts, check for any warning lights on the dashboard.
Electrical System Check: Verify that all electrical components (lights, radio, power windows, etc.) are functioning correctly.
Spezzjoni Viżwali: Periodically inspect the battery terminals and cable for any signs of corrosion, looseness, or damage.

Manutenzjoni

Proper maintenance extends the life of your battery cable assembly and ensures reliable vehicle operation.

Spezzjoni regolari: Annually inspect the cable for cracks, fraying, corrosion, or loose connections.
Terminali Naddaf: If corrosion is present, disconnect the battery (negative first, then positive) and clean the terminals and cable ends with a battery terminal brush and baking soda solution (1 tablespoon baking soda to 1 cup water). Rinse with clean water and dry thoroughly before reconnecting.
Issikka l-Konnessjonijiet: Ensure all connections remain tight. Loose connections can cause poor electrical contact and heat buildup.

Issolvi l-problemi

Sintomu	Kawża Possibbli	Soluzzjoni
Vehicle does not start or cranks slowly	Loose or corroded battery terminals; faulty battery; other electrical issue	Check and clean battery terminals. Ensure connections are tight. Test battery charge. Consult a technician if issues persist.
Electrical components not working	Loose connections; blown fuse in the cable assembly; faulty component	Verify all cable connections are secure. Inspect any integrated fuses within the cable assembly.
Korrużjoni fuq terminals tal-batterija	Battery acid leakage; environmental factors; lack of maintenance	Clean terminals as described in the Maintenance section. Apply dielectric grease.
Cable appears damaged (cracked insulation, fraying)	Wear and tear; physical damage	Replace the battery cable assembly immediately to prevent electrical shorts or failures.

Speċifikazzjonijiet

Ditta: Nissan
Numru tal-Mudell: 24080-EA200
Numru tal-Parti tal-Manifattur: 24080-EA200
Numru tal-Parti OEM: 24080-EA200
Piż tal-oġġett: 9.1 uqija
Dimensjonijiet tal-pakkett: 9.96 x 8.86 x 2.05 pulzieri
ASIN: B00P2PKCAG
Data L-Ewwel Disponibbli: 31 ta’ Ottubru, 2014

Garanzija u Appoġġ

This Genuine Nissan part is typically covered by Nissan's standard parts warranty. For specific warranty details, please refer to the warranty information provided with your purchase or contact an authorized Nissan dealership. For technical support or further assistance, please contact your local Nissan service center or the retailer from whom the part was purchased.

	Gwida ta' Referenza Rapida għan-Nissan Maxima tal-2007 Gwida konċiża għall-karatteristiċi u l-kontrolli tan-Nissan Maxima tal-2007, li tkopri s-sistemi interni, l-assistenza lis-sewwieq, il-kontroll tal-klima, l-awdjo, u aktar.
	Manwal tas-Sid tan-Nissan X-Trail: Gwida Komprensiva għall-Vettura Tiegħek Dan il-manwal tas-sid jipprovdi informazzjoni dettaljata dwar kif tħaddem u żżomm in-Nissan X-Trail tiegħek, inkluż is-sistema avvanzata e-POWER, il-karatteristiċi tas-sigurtà, u l-ispeċifikazzjonijiet tekniċi.
	Manwal tas-Sid u Informazzjoni dwar il-Manutenzjoni tan-Nissan Kicks tal-2023 Skopri informazzjoni essenzjali għan-Nissan Kicks tal-2023 tiegħek b'dan il-manwal komprensiv tas-sid. Dan ikopri t-tħaddim tal-vettura, l-iskedi tal-manutenzjoni, il-karatteristiċi tas-sigurtà, il-liċenzji tas-softwer, u pariri importanti għall-konsumatur għal esperjenza ta' sewqan sikura u infurmata.
	2019 Nissan Kicks Owner's Manual and Maintenance Guide Your essential guide to the 2019 Nissan Kicks, covering vehicle operation, safety features, maintenance schedules, and customer support from Nissan.
	Manwal tas-Sid u Informazzjoni dwar il-Manutenzjoni tan-Nissan Versa tal-2025 Manwal komprensiv tas-sid għan-Nissan Versa tal-2025, li jkopri t-tħaddim, il-manutenzjoni, il-karatteristiċi tas-sigurtà, u informazzjoni teknika. Jinkludi dettalji dwar sistemi ta' sigurtà, kontrolli, sewqan, proċeduri ta' emerġenza, u kura.
	Manwal tas-Sid tan-Nissan Maxima tal-2002 - Gwida għall-Operazzjoni u s-Sigurtà tal-Vettura Manwal komprensiv tas-sid għan-Nissan Maxima tal-2002, li jkopri t-tħaddim tal-vettura, il-karatteristiċi tas-sigurtà, il-kontrolli, il-manutenzjoni, u informazzjoni dwar il-kura tal-klijent mingħand Nissan.

Nissan 24080-EA200