Manwal tal-Utent tar-Robot tat-Tindif tat-Twieqi ECOVACS WINBOT W930

Introduzzjoni

About Your WINBOT W930

The ECOVACS WINBOT W930 is an advanced window cleaning robot designed to efficiently clean framed and frameless windows of various thicknesses, as well as mirrors and other smooth glass surfaces. Featuring a Smart Drive system and a 4-stage cleaning process, it ensures thorough cleaning, even in corners.

Karatteristiċi Ewlenin

• Smart Drive System for comprehensive cleaning.
• 4-stagil-proċess tat-tindif.
• Suitable for framed and frameless vertical windows, mirrors, and shower cabins.
• Enhanced safety features: continuous vacuum monitoring, backup battery, and safety tether.
• Ergonomically designed for easy handling.
• Equipped with fall sensors for frameless glass and obstacle sensors for window handles.
• Operazzjoni ta 'kontroll mill-bogħod.
• Effective on both small and large glass surfaces.

Informazzjoni Importanti dwar is-Sigurtà

Sistema ta' Sigurtà Tripla

The WINBOT W930 incorporates a triple safety system to prevent falls:

1. Vacuum Monitoring: A sensor continuously monitors the vacuum pressure. A secondary suction ring provides backup if the primary system fails.
2. Batterija tal-Backup: An internal battery secures the WINBOT W930 in case of a power outage.
3. Safety Tether: A suction cup and safety rope are provided to secure the WINBOT W930, preventing it from falling if it detaches from the glass. Always attach the safety tether before operation.

Prekawzjonijiet Ġenerali tas-Sigurtà

• Ensure the safety tether is always attached to a secure anchor point before operating the robot.
• Do not use the robot on cracked or damaged glass surfaces.
• Żomm idejk u ħwejjeġ maħlula 'l bogħod mill-partijiet li jiċċaqalqu waqt it-tħaddim.
• Do not immerse the robot in water or other liquids.
• Use only the recommended cleaning solution and accessories.
• Supervise the robot during its first few uses to ensure proper operation.

Kontenut tal-Pakkett

Ivverifika li l-oġġetti kollha huma preżenti fil-pakkett tiegħek:

• Robot tat-Tindif tat-Twieqi ECOVACS WINBOT W930
• Kontroll mill-bogħod
• Adapter tal-Enerġija
• Irbit tas-Sigurtà
• Cleaning Pads (multiple)
• Soluzzjoni tat-Tindif
• Manwal għall-Utent (dan id-dokument)

Gwida ta' Setup

1. Charging the Internal Battery

Before first use, ensure the internal battery is fully charged. Connect the power adapter to the robot and a power outlet. A green flashing light indicates the battery is charging. Allow several hours for a full charge.

2. Twaħħil tal-Pads tat-Tindif

Attach clean microfiber cleaning pads to the underside of the WINBOT W930. Ensure they are securely fastened.

Immaġni: Taħt view of the WINBOT W930, illustrating the attachment points for the cleaning pads.

3. Applying Cleaning Solution

Ħafif dampen the cleaning pads with the provided cleaning solution. Avoid over-saturating the pads, as this can affect the robot's movement and cleaning performance.

4. Attaching the Safety Tether

Securely attach the safety tether's suction cup to the window surface, away from the robot's cleaning path. Connect the other end of the tether to the designated attachment point on the WINBOT W930.

Istruzzjonijiet Operattivi

1. Tixgħel

Switch the power button located on the back of the WINBOT W930 to the 'ON' position.

Immaġni: Fuq view of the WINBOT W930, highlighting the power button and handle.

2. Placing the Robot on the Window

Place the WINBOT W930 firmly onto the glass surface. The robot will create a vacuum seal, indicated by a solid light. Ensure the robot is securely attached before releasing it.

Image: The WINBOT W930 actively cleaning a large exterior window.

Image: The WINBOT W930 cleaning an interior glass partition in an office setting.

3. Ibda ċ-Ċiklu tat-Tindif

Press the 'Start' button on the robot or the remote control to begin the cleaning cycle. The WINBOT W930 will automatically calculate the optimal cleaning path.

4. Bl-użu tal-Kontroll mill-bogħod

The remote control allows you to manually steer the robot if needed, especially for reaching specific spots or guiding it on tall windows. Refer to the remote control diagram in the separate remote control guide for button functions.

5. Completing the Cleaning Cycle

Once the cleaning cycle is complete, the WINBOT W930 will return to its starting point and emit an audible alert. Carefully remove the robot from the glass surface.

Manutenzjoni

1. Tindif tal-Pads

After each use, remove the cleaning pads and wash them thoroughly. Ensure they are clean and dry before the next use. Replace worn or heavily soiled pads with new ones.

2. Cleaning the Robot

Wipe the exterior of the WINBOT W930 with a soft, dry cloth. Do not use abrasive cleaners or immerse the robot in water.

3. Storing the Robot

Store the WINBOT W930 in a cool, dry place, away from direct sunlight and extreme temperatures. Ensure the battery is charged before long-term storage.

Image: The ECOVACS WINBOT W930 window cleaning robot, ready for storage or use.

Immaġni: Splodiet view diagram showing the internal components and cleaning pad assembly of the WINBOT W930.

Issolvi l-problemi

Speċifikazzjonijiet

Garanzija u Appoġġ

For warranty information and technical support, please refer to the documentation provided at the time of purchase or visit the official ECOVACS websit. Żomm l-irċevuta tax-xiri tiegħek bħala prova tax-xiri.

For further assistance, you may contact ECOVACS customer service through their official channels.