1. Introduzzjoni
L-ADC Advantage 6021N Series Home Automatic Digital Blood Pressure Monitor is designed for accurate and convenient blood pressure measurement at home. It measures systolic pressure, diastolic pressure, and pulse, utilizing Smart Logic Technology for optimal inflation. The monitor also features an Irregular Heartbeat Detector and memory storage for up to 99 readings for two users with date/time stamps.
X'hemm fil-Kaxxa:
- Avvanzatage 6021N Blood Pressure Monitor Unit
- Wide-Range Adult D-Bar Cuff (8.7 inches to 16.5 inches / 22 cm to 42 cm)
- 4 batteriji alkalini AA
- Deluxe Storage Case
- Manwal ta' Istruzzjoni

Image: The ADC Advantage 6021N Blood Pressure Monitor unit shown alongside its wide-range arm cuff.
2. Informazzjoni dwar is-Sigurtà
Please read all instructions carefully before using this device. Keep this manual for future reference. Consult your physician for interpretation of blood pressure measurements. Self-diagnosis and treatment based on measurements can be dangerous. This device is intended for adult use only. Keep out of reach of children. Do not use this device on infants or individuals who cannot express their consent. If you have any medical conditions, consult your doctor before use.
Propożizzjoni 65 Twissija: Dan il-prodott jista 'jkun fih kimiċi magħrufa mill-Istat ta' Kalifornja li jikkawżaw kanċer u difetti fit-twelid jew ħsara riproduttiva oħra.
3. Setup
3.1. Installazzjoni tal-batterija
- Iftaħ il-qoxra tal-kompartiment tal-batterija li tinsab fuq wara tal-monitor.
- Insert four (4) AA alkaline batteries, ensuring the correct polarity (+/-) as indicated inside the compartment.
- Agħlaq l-għatu tal-kompartiment tal-batterija sew.

Immaġni: In-naħa ta' wara view of the blood pressure monitor with the battery compartment open, showing the placement of four AA batteries.
3.2. Cuff Connection
- Locate the air tube connector on the cuff.
- Firmly insert the air tube connector into the air jack located on the side of the main monitor unit. Ensure a snug fit to prevent air leakage during measurement.
4. Istruzzjonijiet Operattivi
4.1. L-applikazzjoni tal-Cuff
- Poġġi f'pożizzjoni komda b'dahrek appoġġjat u saqajk ċatti mal-art.
- Place the cuff on your bare upper arm, approximately 1-2 cm above the elbow joint. The air tube should run down the inside of your arm.
- Kun żgur li l-manku jkun komdu imma mhux issikkat wisq. Għandek tkun tista' ddaħħal żewġ swaba' bejn il-manku u driegħek.
- Strieħ driegħek fuq mejda jew wiċċ ċatt sabiex il-manku jkun fil-livell tal-qalb.

Image: A blood pressure cuff correctly positioned on an upper arm, ready for a measurement.
4.2. Tieħu Kejl
- Press the 'START/STOP' button to begin the measurement.
- The cuff will automatically inflate using Smart Logic Technology to determine the ideal inflation level. Remain still and silent during inflation and deflation.
- Once the measurement is complete, the monitor will display your systolic pressure, diastolic pressure, and pulse rate.
- The monitor will automatically deflate and turn off after a period of inactivity.
4.3. Ditekter ta' taħbit tal-qalb irregolari
This monitor is equipped with an Irregular Heartbeat Detector. If an irregular heartbeat is detected during the measurement, a specific symbol will appear on the display. If this symbol appears frequently, consult your physician.
4.4. Recall tal-Memorja
The unit can recall the last 99 readings for two different users with a convenient date/time stamp. To access stored readings, press the 'M' (Memory) button. Press 'M' repeatedly to scroll through previous measurements. To switch between User 1 and User 2 memory, use the designated user selection button (refer to the monitor's specific button layout).
5. Manutenzjoni u Kura
5.1. Tindif
Wipe the monitor and cuff with a soft, dry cloth. If necessary, use a slightly damp cloth with mild soap, then wipe dry. Do not use abrasive cleaners or immerse the unit or cuff in water.
5.2. Ħażna
Store the device in its deluxe storage case in a cool, dry place, away from direct sunlight, extreme temperatures, and humidity. Remove batteries if the unit will not be used for an extended period.
5.3. Cuff Inspection
Periodically inspect the cuff for any signs of wear or damage. The cuff is a consumable item and may require replacement over time to ensure accurate readings. Incorrect cuff size can result in measurement errors; please choose carefully.
6 Issolvi l-problemi
- Error Message / Inaccurate Readings: Ensure the cuff is correctly applied and the air tube is securely connected. Verify that the cuff size is appropriate for your arm circumference. Remain still and silent during measurement. Check battery levels.
- Ebda Qawwa: Iċċekkja jekk il-batteriji humiex imdaħħla sew u mhumiex eżawriti. Ibdel b'batteriji ġodda jekk meħtieġ.
- Il-Maniċċa Mhux Qed Tintefaħ: Ensure the air tube is not kinked or blocked. Check for any leaks in the cuff or connections.
- Irregular Heartbeat Symbol Appears Frequently: This indicates consistent detection of an irregular heartbeat. Consult your physician for advice.
7. Speċifikazzjonijiet
| Karatteristika | Dettall |
|---|---|
| Numru tal-Mudell | 6021N |
| Dimensjonijiet tal-Prodott | 4.92 x 7.17 x 3.54 pulzieri |
| Piż tal-oġġett | 1.07 Liri |
| Cuff Size (Band Size) | 8.7-16.5 inches (22 cm to 42 cm) |
| Sors tal-Enerġija | 4 batteriji alkalini AA (inklużi) |
| Tip ta 'Wiri | Diġitali |
| Memorja | 99 readings for two users with date/time stamp |
| Karatteristiċi Speċjali | Smart Logic Technology, Irregular Heartbeat Detector, Automatic Inflation/Deflation |
| Konformità | Meets or exceeds EN 1060-1 and EN 1060-3 |
| Karatteristika tal-Materjal | Made without natural rubber latex or phthalates |
Cuff Sizing Chart: 6021N and 6022N

Image: A chart detailing the applicable limb range in centimeters and inches for Small Adult, Adult, and Large Adult cuffs for models 6021N and 6022N. Note: Incorrect cuff size can result in measurement errors. Please choose carefully.
8. Garanzija u Appoġġ
8.1. Informazzjoni dwar Garanzija
L-ADC Advantage 6021N Series Blood Pressure Monitor is backed by a five-year warranty, ensuring quality and reliability.
8.2. Informazzjoni ta' Kuntatt tal-Manifattur
For support or inquiries, please contact the manufacturer at: 1-800-232-2670.





