1. Introduzzjoni
This user manual provides comprehensive instructions for the setup, operation, maintenance, and troubleshooting of the Cisco IP Phone 8811. Designed for business-class collaboration, this VoIP phone delivers high-fidelity, reliable, secure, and scalable voice communications. Please read this manual thoroughly to ensure proper use and to maximize the functionality of your device.
2. Prodott Aktarview
The Cisco IP Phone 8811 is a cost-effective, business-class collaboration endpoint. It features an attractive ergonomic design and wideband audio for clear voice communications. The device supports SIP, RTCP, RTP, SRTP, and SDP protocols, offering encrypted voice communications for enhanced security. It integrates with Cisco communication servers to provide a comprehensive suite of unified communications features.
Image of the Cisco IP Phone 8811, a charcoal-colored VoIP phone with a display screen, keypad, and various function buttons. The phone features a handset on the left, a large display on the right, and a central navigation cluster.
3. Setup
3.1 Kontenut tal-Pakkett
Qabel tibda, kun żgur li l-komponenti kollha huma preżenti:
- Cisco IP Phone 8811 unit
- Handset u korda mkebba
- Ethernet cable (for network connection)
- Optional: Power adapter (if Power over Ethernet (PoE) is not used)
- Dokumentazzjoni (dan il-manwal)
3.2 Konnessjoni tat-Telefon
- Qabbad il-Handset: Ipplaggja tarf wieħed tal-korda mkebba fil-handset u t-tarf l-ieħor fil-port tal-handset fuq il-bażi tat-telefon.
- Qabbad man-Netwerk (PoE): If using Power over Ethernet, connect an Ethernet cable from your network switch or router to the "SW" (Switch) port on the back of the phone. The phone will power on automatically.
- Connect to Network (External Power): If PoE is not available, connect an Ethernet cable from your network switch or router to the "SW" port. Then, connect the optional power adapter to the phone's power port and plug it into a power outlet.
- Qabbad mal-PC (Mhux obbligatorju): If you wish to connect a computer through the phone, connect an Ethernet cable from your computer to the "PC" port on the back of the phone.
- L-Ewwel Bidu: Allow the phone to power on and connect to the network. This process may take a few minutes as the phone obtains an IP address and registers with your call control system.
3.3 Għażliet ta 'Immuntar
The Cisco IP Phone 8811 is designed for desktop use with its integrated stand. It is also wall-mountable using an optional wall-mount kit (sold separately).
4. Istruzzjonijiet Operattivi
4.1 Funzjonijiet Bażiċi tas-Sejħiet
- Tagħmel Sejħa: Lift the handset, press the Speaker button, or press a line button. Dial the number and press the Dial softkey or wait for automatic dialing.
- Tweġiba għal Sejħa: Lift the handset, press the Speaker button, or press the Answer softkey.
- Tmiem Sejħa: Replace the handset, press the Speaker button again, or press the End Call softkey.
- Placing a Call on Hold: During an active call, press the Hold softkey. To resume, press the Resume softkey or the flashing line button.
- Trasferiment ta' Sejħa: During an active call, press the Transfer softkey. Dial the transfer recipient's number, and once connected, press Transfer again to complete.
4.2 Speakerphone and Headset
Agħfas il- Speaker button to activate or deactivate the speakerphone. The phone also supports a headset connection via the dedicated headset port.
4.3 Sejħiet ta' Konferenza
The Cisco IP Phone 8811 supports 3-way conference calls. During an active call, press the Konferenza softkey, dial the number of the third party, and once connected, press Konferenza għal darb'oħra biex jingħaqad mal-partijiet kollha.
4.4 Voicemail
Agħfas il- Messaġġi button to access your voicemail system. Follow the voice prompts to retrieve messages.
4.5 Aġġustament tal-Volum
Uża l- Volum button (rocker switch) to adjust the volume of the handset, speakerphone, or ringer.
5. Manutenzjoni
5.1 Tindif tat-Telefon
To clean the phone, use a soft, lint-free cloth. If necessary, slightly dampen the cloth with water. Avoid using abrasive cleaners, solvents, or aerosol sprays, as these can damage the phone's surface and internal components.
5.2 Konsiderazzjonijiet Ambjentali
Keep the phone away from direct sunlight, heat sources, and excessive moisture. Ensure proper ventilation around the device to prevent overheating.
6 Issolvi l-problemi
6.1 Kwistjonijiet Komuni u Soluzzjonijiet
| Problema | Kawża Possibbli | Soluzzjoni |
|---|---|---|
| It-telefon ma jixgħelx. | No power from Ethernet (PoE) or power adapter. | Verify Ethernet cable is securely connected to a PoE-enabled port, or ensure power adapter is correctly plugged in. |
| L-ebda ton tal-arloġġ. | Phone not registered with call control system; network issue. | Check network cable connection. Allow time for registration. If issue persists, contact your IT administrator. |
| Ma nistax nisma' lil min qed iċempel / Min qed iċempel ma jistax jismagħni. | Volume too low; faulty handset/headset; network quality issue. | Adjust volume. Test with speakerphone. Check handset/headset connection. |
| Id-displej huwa vojt jew iffriżat. | Software issue; power interruption. | Unplug the Ethernet cable (and power adapter if used) for 10 seconds, then reconnect to restart the phone. |
For issues not listed here or if solutions do not resolve the problem, please contact your system administrator or technical support.
7. Speċifikazzjonijiet
| Brand | OEM |
| Numru tal-Mudell | CP-8811-K9= |
| Kulur | Faħam tal-kannol |
| Piż tal-oġġett | 1 Libbra (madwar 0.45 kg) |
| Dimensjonijiet tal-Pakkett | 13.31 x 10.67 x 2.91 pulzieri (madwar 33.8 x 27.1 x 7.4 ċm) |
| Tip tat-Telefon | Corded VoIP Phone |
| Sors tal-Enerġija | Corded Electric (PoE or optional power adapter) |
| Tip ta' Dialer | Integrated VoIP Dialer |
| Tip ta' Sistema ta' Tweġiba | Diġitali |
| Apparati Kompatibbli | Devices supporting SIP, PoE, and Gigabit Ethernet |
| Kapaċità ta 'Reġistrazzjoni | 18 minutes (for voicemail, if supported by system) |
| Kapaċità ta' Sejħa ta' Konferenza | 3-mod |
8. Garanzija u Appoġġ
Warranty information for the Cisco IP Phone 8811 (Model CP-8811-K9=) is typically provided by the original manufacturer, OEM, or the reseller from whom the product was purchased. Please refer to the documentation included with your purchase or contact your vendor for specific warranty terms and conditions.
For technical support, troubleshooting assistance beyond this manual, or service inquiries, please contact your IT department or the authorized reseller/manufacturer support channels.
