1. Introduzzjoni
This manual provides essential information for the safe and efficient operation of your Bromic Tungsten Smart Heat 4000W Electric Patio Heater. Please read these instructions thoroughly before installation and use, and retain them for future reference. This heater is designed for outdoor use, providing radiant heat for commercial and residential environments.
2. Informazzjoni Importanti dwar is-Sigurtà
WARNING: Failure to follow these instructions may result in electric shock, fire, property damage, or injury.
- Rekwiżiti elettriċi: This heater requires a 220V-240V electrical supply with an approximate amperage of 16.6A. Installation must be performed by a qualified electrician in accordance with all local electrical codes. Ensure the electrical circuit is adequately rated for the heater's power consumption.
- Pjazzament: Maintain minimum clearances from combustible materials. For wall mounting, a minimum clearance of 72 inches (183 cm) is required. For ceiling mounting, a minimum clearance of 96 inches (244 cm) is required. Do not install near flammable liquids, gases, or other combustible materials.
- Espożizzjoni għall-Ilma: The heater has an IPX4 water ingress rating, indicating it is protected against splashing water from any direction. However, avoid direct high-pressure water jets.
- Propożizzjoni 65 Twissija: Dan il-prodott jista' jesponik għal kimiċi magħrufa mill-Istat ta' California li jikkawżaw kanċer u difetti fit-twelid jew ħsara riproduttiva oħra. Għal aktar informazzjoni, żur www.P65Warnings.ca.gov.
- Superviżjoni: Do not leave the heater unattended while operating. Keep children and pets away from the heater.
- Manutenzjoni: Skonnettja l-enerġija qabel ma tagħmel xi manutenzjoni jew tindif.
- Ħsara: Do not operate the heater with a damaged cord or plug, or if the heater malfunctions or has been dropped or damaged in any manner.
3. Prodott Aktarview
The Bromic Tungsten Smart Heat 4000W Electric Patio Heater is a dual-element infrared heater designed for efficient outdoor heating. It features a black high-temperature ceramic coating for durability and a sleek aesthetic. The spectral reflector enhances heat output from the frosted infrared tube elements, minimizing light emission and glare.
Figura 1: Quddiem view of the Bromic Tungsten Smart Heat 4000W Electric Patio Heater, showcasing its black finish and protective grille.
Figura 2: Angolat view of the Bromic Tungsten Smart Heat 4000W Electric Patio Heater, highlighting its compact design and heating elements.
Karatteristiċi ewlenin:
- Dual Quartz Heating Elements: Delivers rapid and consistent infrared heat.
- Kostruzzjoni Durabbli: Premium stainless steel with a high-temperature, corrosion-resistant black finish.
- Immuntar aġġustabbli: Includes brackets for wall or ceiling installation with adjustable angles.
- Effiċjenti fl-Enerġija: Infrared technology focuses heat on objects and people, reducing energy waste.
- reżistenti għat-temp: IPX4 water ingress rating for outdoor reliability.
4. Konfigurazzjoni u Installazzjoni
Proper installation is critical for the safe and effective operation of your heater. It is recommended that installation be performed by a licensed electrician.
4.1 Disimballaġġ
Carefully remove the heater and all components from the packaging. Inspect for any signs of damage. If damage is found, do not proceed with installation and contact your supplier.
4.2 Għażliet ta 'Immuntar
The heater can be mounted on a wall or ceiling. An adjustable bracket is included to direct heat as desired. An optional recess kit is available for flush mounting (sold separately).
- Immuntar tal-ħajt: Minimum clearance of 72 inches (183 cm) from the heater to any combustible material above.
- Immuntar tas-saqaf: Minimum clearance of 96 inches (244 cm) from the heater to any combustible material above.
Figure 3: Heating coverage diagram for the 4000W model, illustrating an approximate heated area of 130 sq ft (12 m²).
4.3 Konnessjoni Elettrika
The heater requires a dedicated 220V-240V circuit. The electrical connection must be hardwired by a qualified electrician. Ensure all wiring complies with local and national electrical codes.
- Voltage: 220-240V
- Ampetà: Approximately 16.6A
- Circuit Breaker: A dedicated circuit breaker is required.
Refer to the detailed wiring diagrams provided in the separate installation guide for specific electrical connection instructions.
5. Istruzzjonijiet Operattivi
Once properly installed and connected to power, your Bromic Tungsten Smart Heat heater is ready for operation.
5.1 Tixgħel/Jitfi
The heater elements can be controlled via a simple on/off switch. This switch is not included with the heater and must be installed by a qualified electrician as part of the electrical setup.
5.2 Heat Control (Optional)
For advanced heat control, the heater is compatible with external dimmer switches or smart control systems (not included). These systems allow for remote on/off functionality and adjustment of heat output. Consult with your electrician regarding compatible control systems.
5.3 Operazzjoni Inizjali
Upon first use, a slight odor or smoke may be emitted as manufacturing residues burn off. This is normal and should dissipate within a short period. Ensure adequate ventilation during initial operation.
6. Manutenzjoni
Regular maintenance ensures optimal performance and longevity of your heater. Always disconnect power to the heater before performing any maintenance.
6.1 Tindif
- Ħalli l-ħiter jiksaħ kompletament qabel ma tnaddaf.
- Imsaħ l-uċuħ ta 'barra b'artab, damp drapp. Tużax prodotti tat-tindif li joborxu, solventi, jew kimiċi ħarxa.
- Periodically inspect the heating elements for dust or debris. Use a soft brush or compressed air to gently remove any accumulation.
6.2 Spezzjoni
Periodically check the mounting brackets and electrical connections for any signs of wear, damage, or loosening. Address any issues promptly to prevent hazards.
7 Issolvi l-problemi
Jekk tesperjenza problemi bil-heater tiegħek, irreferi għall-problemi u s-soluzzjonijiet komuni li ġejjin:
| Problema | Kawża Possibbli | Soluzzjoni |
|---|---|---|
| Il-heater ma jixgħelx. | No power supply, tripped circuit breaker, faulty switch, loose wiring. | Check power supply. Reset circuit breaker. Verify switch operation. Consult a qualified electrician to inspect wiring. |
| Il-ħiter ma jipproduċix biżżejjed sħana. | Incorrect heat setting (if using dimmer), heater too far from target area, environmental factors (wind). | Adjust dimmer setting. Ensure heater is positioned optimally for coverage (refer to Figure 3). Consider windbreaks for windy conditions. |
| Unusual odors or smoke after initial use. | Residues burning off from manufacturing process. | This is normal during initial operation and should dissipate. Ensure good ventilation. If persistent, disconnect power and contact support. |
For issues not listed here or if troubleshooting steps do not resolve the problem, contact Bromic Heating customer support or a qualified electrician.
8. Speċifikazzjonijiet
| Karatteristika | Dettall |
|---|---|
| Brand | Tisħin Bromiku |
| Numru tal-Mudell | BH0420032 |
| Output ta 'Qawwa | 4000 Watts |
| Voltage | 220-240 volt |
| Ampetà | 16.6 Amps |
| Tip ta' Fjuwil | Elettriku |
| Tip ta' Burner | Radiant (Infrared) |
| Kopertura tat-Tisħin | Approximately 130-160 square feet (12-15 m²) |
| Kulur | Iswed |
| Dimensjonijiet tal-Prodott (DxWxH) | 3.5"D x 44"W x 8.5"Għ (8.9 ċm D x 111.8 ċm W x 21.6 ċm Għ) |
| Piż tal-oġġett | 20 liri (9.07 kg) |
| Tip ta 'Immuntar | Wall, Ceiling, Flush (with optional kit) |
| Użu fuq ġewwa/barra | Barra |
| Klassifikazzjoni tad-Dħul tal-Ilma | IPX4 |
| UPC | 023509011995 |
9. Garanzija u Appoġġ
The Bromic Tungsten Smart Heat 4000W Electric Patio Heater is backed by a comprehensive manufacturer's warranty. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official Bromic Heating websit.
Appoġġ għall-Klijent:
For technical assistance, troubleshooting, or warranty claims, please contact Bromic Heating customer support. Contact information can typically be found on the product packaging, the official website, or in the included documentation.
Websit: www.bromic.com (Please refer to your product documentation for the most accurate contact information.)
