1. Introduzzjoni
This manual provides detailed instructions for the installation, operation, and maintenance of your Kwikset 99090-018 Signature Series SmartCode Electronic Deadbolt. This product offers keyless entry convenience and features SmartKey re-key technology for enhanced security and flexibility. Please read these instructions thoroughly before installation and use to ensure proper function and safety.

Figure 1: Kwikset 99090-018 SmartCode Electronic Deadbolt, exterior view.
2. Informazzjoni dwar is-Sigurtà
- Aqra l-istruzzjonijiet kollha kompletament qabel ma tinstalla u tħaddem is-serratura.
- Protect your User Code and Master Code.
- Restrict access to your lock's interior assembly and regularly check your user settings to ensure they have not been altered without your knowledge.
- Use a soft, non-abrasive cloth for cleaning. Do not use polishes, abrasive cleaners, or chemicals that could damage the finish.
3. Kontenut tal-Pakkett
Iċċekkja li l-komponenti kollha huma preżenti qabel tibda l-installazzjoni:
- Assemblaġġ tat-Tastiera Esterni
- Assemblaġġ Intern (bl-għatu tal-batterija)
- Lukkett Deadbolt
- Strike Plate
- Pjanċa tal-Immuntar
- Viti tal-Immuntar
- Ċwievet Standard
- Għodda SmartKey
- 4 Batteriji AA (mhux inklużi)
4. Għodod Meħtieġa
- Tornavit tar-ras Phillips
- Tape Measure
- Lapes
- Ittaqqab (jekk ikunu meħtieġa toqob ġodda)
- Chisel (if strike plate mortising is required)
5. Istruzzjonijiet ta 'installazzjoni
Follow these steps carefully for proper installation. Refer to the detailed diagrams in the included printed manual for visual guidance.
5.1. Ipprepara l-Bieb
- Measure your door's backset (distance from door edge to center of bore hole) to ensure it is 2-3/8" or 2-3/4". Adjust the latch if necessary by rotating the faceplate.
- Verify the door thickness is between 1-3/8" and 1-3/4".
- Ensure the cross bore hole is 2-1/8" in diameter.
5.2. Installa l-Lukkett
- Insert the latch into the door edge, ensuring the