Manwal tal-Utent tal-Kontroll mill-Bogħod DIRECTV RC72

Introduzzjoni

The DIRECTV RC72 Remote Control is designed to provide seamless control over your DIRECTV Genie DVRs and clients in RF (Radio Frequency) mode, and other DIRECTV-branded receivers and DVRs in IR (Infrared) mode. This remote is essential for 2014 and newer Toshiba DIRECTV-Ready TVs, offering advanced functionality and user-friendly operation.

Il-karatteristiċi ewlenin jinkludu:

• Next-generation design with updated IR codes for modern televisions.
• Required for 2014 or newer Toshiba DIRECTV-ready TVs.
• Compatible with all DIRECTV-ready (RVU) televisions.
• Functions with older DIRECTV receivers when configured in IR mode.
• Provides on-screen tips to assist with button usage and programming.

Prodott Overview

Immaġni: Quddiem view of the DIRECTV RC72 Remote Control. The remote is black and white, with a black top section containing navigation and function buttons, and a white bottom section with a numeric keypad. The DIRECTV logo is at the bottom.

Setup u Programmazzjoni

The RC72 remote can operate in two primary modes: RF (Radio Frequency) for Genie DVRs and clients, and IR (Infrared) for older DIRECTV receivers and other devices like TVs and audio systems.

Pairing with DIRECTV Genie DVRs (RF Mode)

1. Ensure your Genie DVR is powered on.
2. Point the RC72 remote towards the Genie DVR.
3. Agħfas u żomm il- MUTE buttuna u l- DĦUL button simultaneously until the green light at the top of the remote flashes twice.
4. A message should appear on your TV screen confirming the remote is now paired in RF mode.

Programming for TV and Audio Devices (IR Mode)

To control your TV's power and volume, or other audio devices, you will need to program the remote using specific codes. The remote utilizes an extensive database of included codes.

1. Ixgħel l-apparat li tixtieq tipprogramma (eż., it-TV tiegħek).
2. On the RC72 remote, press and hold the MUTE buttuna u l- AGĦŻEL button simultaneously until the green light at the top of the remote flashes twice.
3. Enter the 5-digit code for your TV brand. Common codes can be found in your DIRECTV receiver's on-screen menu under "Remote Control Setup" or on the DIRECTV support websit.
4. After entering the code, point the remote at the TV and press the QAWWA button. If the TV turns off, the code is correct.
5. If the TV does not turn off, repeat the process with another code for your brand until successful.
6. To program an audio device, follow similar steps, but select the appropriate device type during the programming process.

Note: On-screen tips provided by your DIRECTV receiver can guide you through the programming process effectively.

Istruzzjonijiet Operattivi

Familiarize yourself with the buttons and their functions for optimal use of your DIRECTV RC72 remote control.

Top Section Buttons

• ON/OFF: Powers your DIRECTV receiver and programmed TV on or off.
• GWIDA: Juri l-gwida tal-programm.
• MENU: Accesses the main menu of your DIRECTV receiver.
• LISTA: Displays your recorded programs list.

Navigation and Control Buttons (Center Section)

• Vleġeġ Direzzjonali ('il fuq, 'l isfel, xellug, lemin): Navigate through menus and guides.
• AGĦŻEL: Jikkonferma għażla.
• Lura: Terġa' lura għall-iskrin jew il-menu preċedenti.
• ĦRUĠ: Joħroġ mill-menu jew mill-iskrin attwali.
• INFORMAZZJONI: Displays information about the current program or selected item.
• Record (Red Dot): Jibda r-reġistrazzjoni tal-programm kurrenti.

Kontroll tal-Volum u tal-Kanal

• VOL (Volum 'il Fuq/'l Isfel): Adjusts the volume of your programmed TV or audio device.
• CH (Kanal 'il fuq/'l isfel): Changes the channel on your DIRECTV receiver.
• MUTE: Ijattiva l-awdjo.
• QABEL: Jirritorna għall-kanal preċedenti.

Kontrolli tal-daqq

• REWIND: Iġib lura d-daqq.
• DABBA/PAWŻA: Jilgħab jew iwaqqaf il-kontenut.
• GĦAL QUDDIEM: Daqq 'il quddiem mgħaġġel.
• Waqqaf: Jieqaf daqq.

Tastiera numerika

• 0-9: Used for direct channel entry and other numeric inputs.
• ENTER (input): Confirms numeric entries or switches to a specific input.
• Dash (-): Used for sub-channels or other specific functions.

Manutenzjoni

Kura xierqa se testendi l-ħajja tal-kontroll remot tiegħek.

• Tindif: Uża drapp artab u niexef biex tnaddaf ir-remote. Tużax prodotti tat-tindif likwidi jew materjali li joborxu.
• Sostituzzjoni tal-batterija: When the remote's performance degrades or the indicator light no longer flashes, it's time to replace the batteries. The RC72 remote typically uses two AA batteries.
  1. Iftaħ il-qoxra tal-kompartiment tal-batterija fuq in-naħa ta' wara tar-remote.
  2. Neħħi l-batteriji qodma.
  3. Insert new AA batteries, ensuring correct polarity (+ and -).
  4. Agħlaq l-għatu tal-kompartiment tal-batterija sew.
• Ħażna: Store the remote in a dry place away from extreme temperatures and direct sunlight.

Issolvi l-problemi

If you encounter issues with your RC72 remote, try the following solutions:

Speċifikazzjonijiet

Appoġġ

For further assistance, programming codes, or advanced troubleshooting, please refer to the official DIRECTV support resources:

• Visit the official DIRECTV website for support documentation and FAQs.
• Contact DIRECTV customer service for personalized assistance.
• Utilize the on-screen help features available through your DIRECTV receiver.

Note: Specific warranty information for this accessory may be available through your DIRECTV service provider or the point of purchase.