1. Introduzzjoni
This manual provides essential information for the safe and efficient operation, installation, and maintenance of your X-PRO 125cc 4-Stroke ATV Engine Motor with Automatic Transmission and Electric Start. Please read this manual thoroughly before installation and use to ensure proper function and longevity of the engine. Retain this manual for future reference.
2. Informazzjoni dwar is-Sigurtà
Always prioritize safety when working with engines. Failure to follow safety instructions can result in serious injury or damage to the engine.
- Ensure the engine is cool before performing any maintenance or installation.
- Disconnect the spark plug wire before working on the engine to prevent accidental starting.
- Ilbes tagħmir protettiv personali (PPE) xieraq, inklużi ingwanti u protezzjoni għall-għajnejn.
- Work in a well-ventilated area, especially when dealing with fuel or exhaust fumes.
- Keep flammable materials away from the engine during operation and maintenance.
- Refer to the ATV's specific manual for chassis-related safety guidelines.
3. Prodott Aktarview
The X-PRO 125cc engine is a robust 4-stroke, single-cylinder unit designed for ATVs, featuring an automatic transmission and electric start for convenience. It is air-cooled and utilizes CDI ignition.
Figura 3.1: Fuq view of the X-PRO 125cc engine motor, showcasing the main unit and accompanying accessories such as the intake manifold and hardware.
Figura 3.2: Ġenb view of the X-PRO 125cc engine, highlighting the cooling fins and general engine casing.
Figura 3.3: Quddiem view of the X-PRO 125cc engine, showing the spark plug and cylinder head area.
4. Setup u Installazzjoni
Proper installation is crucial for engine performance and safety. If you are unsure about any step, consult a qualified mechanic.
4.1 Kontrolli ta' qabel l-installazzjoni
- Kompatibilità: Verify that the engine's mounting points and electrical connectors are compatible with your ATV chassis. Pay special attention to the electrical plug-in. If not compatible, an adapter may be required.
- Livelli ta' Fluwidu: Ensure the engine oil is at the correct level before initial start-up. The lubrication capacity is 900ml (0.20 Gallon) of SF15W/40-SE oil.
- Sistema tal-Fjuwil: Inspect the fuel lines and carburetor for any obstructions or damage.
4.2 Konnessjonijiet elettriċi
Connect the engine's wiring harness to the ATV's electrical system. Ensure all connections are secure and free from corrosion.
Figura 4.1: Detail of the engine's electrical connector, which must be properly matched to the ATV's wiring harness.
4.3 Immuntar tal-Magna
Secure the engine to the ATV frame using appropriate mounting hardware. Ensure all bolts are tightened to the manufacturer's specifications for the ATV chassis.
5. Istruzzjonijiet Operattivi
5.1 Tibda tal-Magna
- Ensure the ATV is in neutral and the parking brake is engaged.
- Dawwar iċ-ċavetta tal-ignition għall-pożizzjoni "ON".
- If the engine is cold, engage the choke.
- Press the electric start button. Release once the engine starts.
- Allow the engine to warm up for a few minutes before riding. Disengage the choke as the engine warms.
5.2 Riding with Automatic Transmission
This engine features an automatic transmission. Simply apply throttle to move forward. The transmission will automatically adjust gears based on speed and load.
5.3 Shutting Down the Engine
To turn off the engine, simply turn the ignition key to the "OFF" position.
6. Manutenzjoni
Regular maintenance is essential for the longevity and optimal performance of your engine.
6.1 Żejt tal-Magna
- Iċċekkja l-Livell taż-Żejt: Check the engine oil level before each ride.
- Bidla taż-Żejt: Change the engine oil after the first 20 hours of operation, and then every 50-100 hours or annually, whichever comes first. Use SF15W/40-SE lubrication model oil. The capacity is 900ml (0.20 Gallon).
6.2 Spark Plug
- Spezzjoni: Inspect the spark plug (Model: A7TC) every 100 hours or annually. Clean or replace if necessary.
- Qabża: Ensure the spark plug gap is set to the manufacturer's specification.
6.3 Filtru tal-Arja
Clean or replace the air filter regularly, especially when operating in dusty conditions. A clogged air filter can reduce engine performance and lifespan.
6.4 Sistema tal-Fjuwil
Use unleaded gasoline with an octane rating of 87# or higher. Periodically check fuel lines for cracks or leaks.
7 Issolvi l-problemi
Din it-taqsima tipprovdi soluzzjonijiet għal kwistjonijiet komuni li tista’ tiltaqa’ magħhom.
| Problema | Kawża Possibbli | Soluzzjoni |
|---|---|---|
| Il-magna ma tibdax | No fuel, weak battery, faulty spark plug, electrical connection issue. | Check fuel level, charge/replace battery, inspect/replace spark plug, verify all electrical connections. |
| Il-magna taħdem ħażin/m'għandhiex qawwa | Clogged air filter, dirty carburetor, incorrect fuel, old spark plug. | Clean/replace air filter, clean carburetor, use fresh 87#+ fuel, replace spark plug. |
| Duħħan eċċessiv mill-egżost | Incorrect oil level, worn engine components. | Check oil level and type. If issue persists, consult a mechanic. |
| Il-magna tisħon iżżejjed | Insufficient airflow (air-cooled), low oil level. | Ensure cooling fins are clean and unobstructed. Check oil level. |
8. Speċifikazzjonijiet
| Karatteristika | Dettall |
|---|---|
| Mudell tal-Magna | 308-999037 |
| Tip ta' Magna | Single Cylinder, 4-Stroke, 2-Valve |
| Cylinder Working Volume | 120ml (0.03 Gallon) |
| Bore & Stroke | 54mm x 49.5mm (2.13" x 1.95") |
| Proporzjon ta' Kompressjoni | 9.0:1 |
| Sistema tat-tkessiħ | Imkessaħ bl-Arja |
| Metodu ta 'tqabbid | CDI (Ignition Type: CFW) |
| Starter | Starter elettriku |
| Trażmissjoni | Trażmissjoni Awtomatika |
| Klaċċ | Automatic Multi-plate Wet Clutch |
| Max. Horsepower | 7.64HP / 5.7KW at 7000-8000 Rpm |
| Max. Torque | 8.0N.m at 5000-6000 Rpm |
| Min. Stable Idle Speed | 1350-1650 r/min |
| Provvista ta 'Karburant | Carburetor Atomization (Carburetor Model: PZ22, Type: Plunger) |
| Fjuwil Rakkomandat | Unleaded Gasoline, Octane No. >= 87# |
| Min. Fuel Consumption | 367g/Kw.h (9.65oz/HP.h) |
| Metodu ta 'Lubrikazzjoni | Pressure/splash |
| Lubrication Model | SF15W/40-SE |
| Lubrication Capacity | 900ml (0.20 Gallon) |
| Mudell ta' Spark Plug | A7TC |
| Materjal | Aluminju |
| Piż tal-oġġett | 65 Liri |
| Voltage | 12 Volts |
| Wattage | 5.7 KW |
9. Garanzija u Appoġġ
For specific warranty information, please refer to the documentation provided at the time of purchase or contact X-PRO customer support directly. Keep your purchase receipt as proof of purchase.
For technical assistance or parts inquiries, please visit the official X-PRO website or contact their customer service department. You can often find support resources, FAQs, and contact information on the brand's official online store or support pages.
X-PRO Store Link: Visit the X-PRO Store on Amazon
