Introduzzjoni
This manual provides instructions for the safe and proper installation and use of your Flexson FLXP1WB2021 Wall Bracket, designed specifically for Sonos Play:1 speakers. Please read this manual thoroughly before installation and retain it for future reference.
Informazzjoni dwar is-Sigurtà
TWISSIJA:
Improper installation can lead to equipment damage or personal injury. If you are unsure about the installation process, consult a qualified professional.
- Ensure the wall material is suitable for supporting the weight of the bracket and speaker.
- Use appropriate wall mounting hardware (screws and anchors) for your specific wall type. Wall mounting hardware is not included with this product.
- Do not exceed the maximum weight capacity of the bracket. This bracket is designed for Sonos Play:1 speakers only.
- Żomm partijiet żgħar 'il bogħod mit-tfal.
Kontenut tal-Pakkett
Iċċekkja li l-komponenti kollha huma preżenti qabel tibda l-installazzjoni:
- 2 x Flexson Wall Brackets (FLXP1WB2021)
- Manwal għall-Utent (dan id-dokument)
Nota: Sonos Play:1 speakers and wall mounting hardware (screws, anchors) are not included.
Setup u Installazzjoni
Follow these steps to install your Flexson wall bracket:
- Ipprepara l-post tal-immuntar: Choose a suitable wall location, ensuring it can support the weight of the speaker and bracket. Mark the desired drilling points for the wall bracket.
- Drill Pilota Toqob: Using an appropriate drill bit for your wall type and chosen mounting hardware, drill pilot holes at the marked locations.
- Attach Wall Bracket: Securely fasten the wall bracket to the wall using suitable screws and wall anchors (not supplied). Ensure the bracket is level and firmly attached.
- Attach Speaker to Bracket: The Flexson bracket features a unique 2-piece design for easy assembly. Align your Sonos Play:1 speaker with the bracket's mounting points. The bracket allows for neat cable routing.
- Kelliem Sikur: Use the provided screw to secure the Sonos Play:1 speaker to the bracket. Ensure it is tightened sufficiently to hold the speaker firmly.
- Ġestjoni tal-Kejbil: Route the speaker's power cable neatly through the designated channels on the bracket to maintain a clean appearance.
Figure 1: Flexson FLXP1WB2021 Wall Brackets. These brackets are designed to securely hold Sonos Play:1 speakers.
Figure 2: Dimensional drawing of the Flexson wall bracket, illustrating various measurements for installation planning.
Tħaddim u Aġġustament
Once installed, the Flexson wall bracket offers flexible positioning for your Sonos Play:1 speaker:
- Inklinazzjoni: The bracket allows for a 15° downward tilt, enabling you to direct sound towards your listening area.
- Dawwar: You can swivel the speaker 40° left and 40° right to optimize sound dispersion.
- Immuntar maqlub: The bracket supports mounting the speaker upside down. This feature allows easier access to the speaker's on-device controls when mounted higher on a wall.
Manutenzjoni
To maintain the appearance and functionality of your Flexson wall bracket:
- Clean the bracket with a soft, dry cloth.
- Evita li tuża prodotti tat-tindif jew solventi li joborxu, għax dawn jistgħu jagħmlu ħsara lill-finitura.
- Periodically check all mounting screws to ensure they remain tight and secure.
Issolvi l-problemi
| Problema | Kawża Possibbli | Soluzzjoni |
|---|---|---|
| Speaker feels unstable or loose. | Mounting screws are not tight enough, or incorrect wall anchors were used. | Ensure all wall mounting screws and the speaker attachment screw are securely tightened. Verify that appropriate wall anchors were used for your wall type. |
| Difficulty adjusting tilt or swivel. | Mechanism may be stiff or overtightened. | Apply gentle force. Do not force adjustments if resistance is excessive. Check for any obstructions. |
Speċifikazzjonijiet
- Numru tal-Mudell: FLXP1WB2021
- Kompatibilità: Sonos Play:1 Speakers
- Materjal: Azzar
- Kulur: Iswed
- Aġġustament tal-inklinazzjoni: 15° downwards
- Aġġustament tad-dawran: 40° xellug, 40° lemin
- Dimensjonijiet tal-Prodott: 5.47 x 3.62 x 1.77 pulzieri (139 x 92 x 45 mm)
- Piż tal-oġġett: 7 uqija (198 gramma)
- Manifattur: FLEXSON
Garanzija u Appoġġ
For warranty information and technical support, please refer to the official Flexson webis-sit jew ikkuntattja lill-bejjiegħ tiegħek. Żomm il-prova tax-xiri tiegħek għal talbiet ta' garanzija.
