Manwal tal-Utent tar-Radju tal-Arloġġ tal-Allarm Doppju Timex T231W2 AM/FM

1. Introduzzjoni

The Timex T231W2 is an AM/FM dual alarm clock radio designed for convenience and reliability. It features a large 1.2-inch green LED display for clear visibility, dual alarms that can be set independently, and a programmable sleep timer. An auxiliary input allows connection of external audio devices. A battery backup system maintains time and alarm settings during power interruptions.

2. Karatteristiċi ewlenin

• Wake to AM/FM radio or buzzer
• 20 Station preset memory (10 AM, 10 FM)
• Large, easy-to-read 1.2-inch green LED display
• Line-in jack to connect auxiliary audio sources
• 2-inch dynamic speaker for clear sound
• Programmable 90-minute Sleep Timer
• Battery backup for time and alarm settings

3. Kontenut tal-Pakkett

• Timex T231W2 AM/FM Dual Alarm Clock Radio (White)

4. Kontrolli u Indikaturi

Figura 1: Quddiem View of the Timex T231W2. This image displays the clock radio from a slight angle, highlighting the large green LED display showing the time '10:09'. Indicators for PM, ALM1 (Buzzer/Radio), ALM2 (Buzzer/Radio), and LOW BATT are visible on the display. The top panel shows several control buttons.

Figura 2: Fuq View of the Timex T231W2 Controls. Din l-immaġni tipprovdi ċara view of the control buttons located on the top panel of the clock radio. Buttons include HOUR, MIN, ALM1, ALM2, VOLUME, MODE, ALM RESET, SNOOZE/SLEEP/DISPLAY DIMMER, PRESET, and TUNING controls.

4.1. Indikaturi tal-Wiri

• Wiri tal-Ħin: Large green LED digits show current time.
• Indikatur tal-PM: Jixgħel meta l-ħin ikun fis-sigħat ta' PM.
• ALM 1 / ALM 2: Indicates which alarm is active.
• BUZZER / RADIO: Indicates if the active alarm is set to buzzer or radio.
• BAT BAXX: Lights up when backup batteries are low and need replacement.

4.2. Buttuni tal-Kontroll (Il-Pannell ta' Fuq)

• HOUR / MIN: Used to set time and alarm hours/minutes.
• ALM 1 / ALM 2: Used to set and activate Alarm 1 and Alarm 2.
• VOLUM +/-: Adjusts the radio volume.
• MODE / ALM RESET: Switches between functions (e.g., radio, AUX) and resets active alarms.
• SNOOZE / SLEEP / DISPLAY DIMMER: Jattiva s-snooze, jissettja t-tajmer tal-irqad, jew jaġġusta l-luminożità tad-displej.
• PRESET / TUNING: Used for saving and recalling radio presets, and manually tuning radio frequencies.

5. Setup

5.1. Konnessjoni tal-Enerġija

1. Ipplaggja l-korda tal-enerġija AC f'bokk standard tal-ħajt.
2. The display will flash, indicating the unit is powered on but the time is not yet set.

5.2. Installazzjoni ta 'Backup tal-Batterija

The unit requires 2 AAA batteries (not included) for backup power. These batteries maintain time and alarm settings during a power outage.

1. Iftaħ l-għatu tal-kompartiment tal-batterija li jinsab fuq il-qiegħ ta 'l-unità.
2. Insert 2 new AAA batteries, observing the correct polarity (+ and -) as indicated inside the compartment.
3. Agħlaq l-għatu tal-kompartiment tal-batterija sew.
4. If the 'LOW BATT' indicator lights up, replace the batteries.

5.3. Issettjar tal-Ħin Attwali

1. Agħfas u żomm il- MODALITÀ Agħfas il-buttuna sakemm il-wiri tal-ħin jibda jteptep.
2. Agħfas il- SIEGĦA button repeatedly to set the hour. Observe the PM indicator for correct AM/PM setting.
3. Agħfas il- MIN button repeatedly to set the minutes.
4. Agħfas il- MODALITÀ Agħfas il-buttuna mill-ġdid biex tikkonferma u toħroġ mill-modalità tal-issettjar tal-ħin.

6. Istruzzjonijiet Operattivi

6.1. Tħaddim tar-Radju (AM/FM)

1. Agħfas il- MODALITÀ button repeatedly until 'FM' or 'AM' appears on the display.
2. Agħfas il- IRTUNING buttons (up/down arrows) to manually tune to a desired station. Press and hold to auto-scan for the next available station.
3. Aġġusta l-volum billi tuża VOLUM +/- buttuni.

6.1.1. Setting and Recalling Radio Presets

The unit can store up to 20 radio stations (10 AM, 10 FM).

1. Intonizza l-istazzjon tar-radju mixtieq.
2. Agħfas u żomm il- Issettjat minn qabel button until the preset number flashes on the display.
3. Uża l- IRTUNING buttons to select the desired preset number (P01-P10 for AM/FM).
4. Agħfas il- Issettjat minn qabel Agħfas il-buttuna mill-ġdid biex issalva l-istazzjon.
5. Biex tirrevoka preset, agħfas il-buttuna Issettjat minn qabel Agħfas il-buttuna ripetutament biex tiċċaqlaq bejn l-istazzjonijiet salvati.

6.2. Setting and Using Alarms (Alarm 1 & Alarm 2)

The clock radio features two independent alarms.

1. Agħfas u żomm il- ALM 1 or ALM 2 Agħfas il-buttuna sakemm il-ħin tal-allarm jteptep.
2. Agħfas il- SIEGĦA u MIN buttuni biex tissettja l-ħin tal-allarm mixtieq.
3. Agħfas il- ALM 1 or ALM 2 button again to select the wake source: BUZZER or RADJU. The corresponding indicator will light up.
4. Agħfas il- ALM 1 or ALM 2 button a third time to confirm and activate the alarm. The alarm indicator (ALM 1 or ALM 2) will remain lit.
5. Biex titfi allarm li qed idoqq, agħfas il-buttuna IRRIŻISTRIZZAR TAL-ALM buttuna. L-allarm jerġa' jiġi ssettjat mill-ġdid għall-għada.
6. To deactivate an alarm completely, press the corresponding ALM 1 or ALM 2 button until its indicator light turns off.

6.3. Funzjoni Snooze

Meta tinstema' allarm, agħfas il-buttuna SNOOZE/SLEEP/DISPLAY DIMMER buttuna biex isikket temporanjament l-allarm għal madwar 9 minuti. L-allarm jerġa' jdoqq wara l-perjodu ta' snooze.

6.4. Sleep Timer

The sleep timer allows you to fall asleep to the radio, which will automatically turn off after a set period (up to 90 minutes).

1. Waqt li r-radju jkun qed idoqq, agħfas il-buttuna SNOOZE/SLEEP/DISPLAY DIMMER Agħfas il-buttuna ripetutament biex tgħaddi mill-għażliet tat-tajmer tal-irqad (eż., 90, 60, 30, 15-il minuta, MITFI).
2. Ir-radju se jdoqq għat-tul magħżul u mbagħad jintefa awtomatikament.

6.5. Dimmer tal-Wiri

To adjust the brightness of the display, press and hold the SNOOZE/SLEEP/DISPLAY DIMMER button. The display brightness will cycle through different levels. Release the button when the desired brightness is reached.

6.6. Using the Line-in Jack (AUX)

Connect an external audio device (e.g., smartphone, MP3 player) to the unit using a 3.5mm audio cable (not included).

1. Plug one end of the 3.5mm audio cable into the Line-in jack on the back of the clock radio.
2. Ipplaggja t-tarf l-ieħor fil-jack tal-headphones jew fl-output tal-awdjo tat-tagħmir estern tiegħek.
3. Agħfas il- MODALITÀ button repeatedly until 'AUX' appears on the display.
4. Ibda daqq fuq it-tagħmir estern tiegħek.
5. Aġġusta l-volum billi tuża VOLUM +/- buttons on the clock radio and/or your external device.

7. Manutenzjoni

7.1. Tindif

• Aqla 'l-unità mill-iżbokk tad-dawl qabel it-tindif.
• Uża drapp artab u niexef biex timsaħ l-uċuħ ta’ barra.
• Do not use liquid cleaners, abrasive cleaners, or sprays, as these may damage the finish.

7.2. Kura Ġenerali

• Avoid placing the unit in direct sunlight, near heat sources, or in areas with high humidity or dust.
• Twaqqafx il-fetħiet tal-ventilazzjoni.
• Jekk l-unità ma tkunx se tintuża għal perjodu estiż, neħħi l-batteriji ta' backup biex tevita t-tnixxija.

8 Issolvi l-problemi

9. Speċifikazzjonijiet

10. Garanzija u Appoġġ

For warranty information or technical support, please refer to the documentation included with your purchase or contact the manufacturer directly. Keep your proof of purchase for warranty claims.

11. Informazzjoni dwar is-Sigurtà

TWISSIJA: Dan il-prodott jista’ jesponik għal kimiċi inkluż iċ-ċomb, li huwa magħruf mill-Istat ta’ Kalifornja li jikkawża kanċer u difetti fit-twelid jew ħsara riproduttiva oħra. Għal aktar informazzjoni mur fuq www.P65Warnings.ca.gov.

Dejjem segwi l-prekawzjonijiet bażiċi ta' sigurtà meta tuża apparati elettriċi biex tnaqqas ir-riskju ta' nar, xokk elettriku, u korriment personali.