Introduzzjoni
This manual provides comprehensive instructions for the safe and efficient use of your Hype HY-LPB Bluetooth LED Speaker. Please read this manual thoroughly before operating the device and retain it for future reference.
Informazzjoni dwar is-Sigurtà
- Tesponix l-ispiker għal temperaturi estremi, dawl tax-xemx dirett, jew umdità għolja.
- Evita li twaqqa’ jew tissuġġetta lill-kelliem għal impatti qawwija.
- Do not disassemble or attempt to repair the speaker yourself. This may void the warranty and cause damage.
- Żomm il-kelliem 'il bogħod mill-ilma u likwidi oħra.
- Uża biss il-kejbil tal-iċċarġjar provdut jew wieħed ekwivalenti ċċertifikat.
- Clean the speaker with a soft, dry cloth. Do not use abrasive cleaners.
Kontenut tal-Pakkett
Jekk jogħġbok iċċekkja li l-oġġetti kollha huma preżenti fil-pakkett tiegħek:
- Hype HY-LPB Bluetooth LED Speaker
- Cable tal-Iċċarġjar tal-USB
- Manwal għall-Utent (dan id-dokument)
Prodott Overview
Familiarize yourself with the components of your Hype HY-LPB speaker.

Figura 1: The Hype HY-LPB Bluetooth LED Speaker shown with its retail packaging. The speaker features a hexagonal design with control buttons on one end and a speaker grille on the side. The packaging highlights its "LED Power Bass" feature.
The speaker features an intuitive control panel and a vibrant LED light display.

Figura 2: Close-up view of the Hype HY-LPB speaker's LED panel, displaying multiple colors. The LED lights are visible through a perforated grille, indicating the speaker's dynamic lighting capabilities.
Control Buttons (Refer to Figure 1)
- Buttuna tal-Qawwa: Agħfas u żomm biex tixgħel jew titfi l-ispiker.
- Buttuna Play/Pause: Agħfas biex tilgħab jew twaqqaf l-awdjo.
- Volum Up / Track Li jmiss: Agħfas biex iżżid il-volum. Agħfas u żomm għat-trakka li jmiss.
- Volume Down / Track Preċedenti: Agħfas biex tnaqqas il-volum. Agħfas u żomm għat-trakka ta' qabel.
- LED Mode Button: Agħfas biex tiċċikla bejn il-modi differenti tad-dawl LED.
- Buttuna ta' Tqabbil tal-Bluetooth: Agħfas biex tidħol fil-mod ta 'tqabbil Bluetooth.
Setup
1. Iċċarġja l-Ispeaker
- Qabbad it-tarf iż-żgħir tal-kejbil tal-iċċarġjar USB mal-port tal-iċċarġjar fuq l-ispiker.
- Qabbad it-tarf il-kbir tal-kejbil tal-iċċarġjar USB ma' adapter tal-enerġija USB (mhux inkluż) jew mal-port USB tal-kompjuter.
- Id-dawl indikatur tal-iċċarġjar jixgħel waqt l-iċċarġjar u jintefa meta jkun iċċarġjat kompletament.
- Ċarġ sħiħ tipikament jieħu madwar 2-3 sigħat.
2. Tixgħil / Mitfi
- Biex tixgħel: Agħfas u żomm il-buttuna Buttuna tal-Qawwa for 3 seconds. You will hear an audible prompt.
- Biex titfi: Agħfas u żomm il-buttuna Buttuna tal-Qawwa for 3 seconds. You will hear an audible prompt.
3. Tqabbil tal-Bluetooth
- Ensure the speaker is powered on and within 10 meters (33 feet) of your Bluetooth-enabled device.
- The speaker will automatically enter pairing mode when powered on for the first time, or you can press the Buttuna ta' Tqabbil tal-Bluetooth. The LED indicator will flash rapidly.
- Fuq l-apparat tiegħek (smartphone, tablet, eċċ.), attiva l-Bluetooth u fittex apparati disponibbli.
- Agħżel "HY-LPB"mil-lista ta' apparati misjuba.
- Once paired, the speaker will emit an audible confirmation, and the LED indicator will stop flashing and remain solid.
- L-ispiker jerġa' jikkonnettja awtomatikament mal-aħħar apparat imqabbad meta jixgħel, jekk l-apparat ikun fil-firxa u l-Bluetooth ikun attivat.
Jopera l-Ispeaker
Daqq Awdjo
- After successful Bluetooth pairing, open your music application on your device and begin playback.
- Agħfas il- Buttuna Play/Pause on the speaker to pause or resume playback.
- Agħfas il- Buttuna tal-Volum / Binarju li Jmiss to increase volume. Press and hold to skip to the next track.
- Agħfas il- Volum 'l isfel / Buttuna tat-Trekk Preċedenti to decrease volume. Press and hold to go to the previous track.
Kontroll tad-Dwal LED
- Agħfas il- Buttuna tal-Modalità LED to cycle through various light patterns and colors.
- Kompli agħfas il-buttuna biex issib id-displej tad-dawl preferut tiegħek jew biex titfi d-dwal.
Ħajja tal-batterija
- The speaker provides approximately 8 sigħat of audio playback without the LED lights activated.
- When the LED lights are in use, the battery life is approximately 5 sigħat.
- A low battery indicator (usually a flashing LED or audible prompt) will notify you when charging is required.
Manutenzjoni
Tindif
- Ensure the speaker is turned off and disconnected from any power source before cleaning.
- Imsaħ il-parti ta’ barra tal-ispiker b’ċarruta ratba, niexfa u mingħajr suf.
- Tużax prodotti tat-tindif likwidi, aerosols, jew solventi, għax dawn jistgħu jagħmlu ħsara lill-finitura jew lill-komponenti interni.
Ħażna
- Aħżen l-ispiker f'post frisk u niexef 'il bogħod mix-xemx diretta u minn temperaturi estremi.
- Jekk taħżinha għal perjodu estiż, iċċarġja l-batterija sa madwar 50% kull ftit xhur biex ittawwal il-ħajja tagħha.
Issolvi l-problemi
| Problema | Kawża Possibbli | Soluzzjoni |
|---|---|---|
| L-ispeaker ma jixgħelx. | Il-batterija hija eżawrita. | Iċċarġja l-ispiker għal mill-inqas 30 minuta. |
| Ma tistax tqabbad permezz tal-Bluetooth. | Bluetooth is not enabled on your device; speaker is too far; speaker is already paired to another device. | Ensure Bluetooth is on; move speaker closer; disconnect from other devices or restart speaker. |
| L-ebda ħoss waqt id-daqq. | Volume is too low; device is not playing audio; speaker is not connected. | Increase volume on both speaker and device; ensure audio is playing; re-pair Bluetooth. |
| Id-dwal LED mhumiex qed jaħdmu. | LED mode is off; speaker malfunction. | Press the LED Mode Button to cycle through modes. If problem persists, contact support. |
Speċifikazzjonijiet
| Numru tal-Mudell | HY-LPB |
| Teknoloġija tal-Konnettività | Bluetooth |
| Metodu ta' Kontroll | Application (via Bluetooth) |
| Dimensjonijiet (L x W x H) | 10.1 x 10.41 x 25.4 ċm (madwar 4 x 4.1 x 10 pulzieri) |
| Piż | 510 g (madwar 1.12 libbra) |
| Kulur | Iswed |
| Karatteristiċi Speċjali | Bluetooth, Color-changing LED Lights |
| Battery Life (without lights) | Sa 8 sigħat |
| Battery Life (with lights) | Sa 5 sigħat |
Informazzjoni dwar Garanzija
Hype products are manufactured to the highest quality standards. For specific warranty details, please refer to the warranty card included with your purchase or visit the official Hype website. This warranty typically covers manufacturing defects for a specified period from the date of purchase.
Appoġġ
For further assistance, technical support, or to inquire about replacement parts, please visit the official Hype website or contact their customer service department. Contact information can usually be found on the product packaging or the brand's official online presence.





