Manwal tal-Utent tal-Ispeaker Wireless Portabbli Creative Muvo 20

Introduzzjoni

This manual provides comprehensive instructions for the setup, operation, and maintenance of your Creative Muvo 20 Portable Wireless Speaker. Please read this manual thoroughly to ensure proper use and to maximize your listening experience. The Creative Muvo 20 is designed for portability and high-quality wireless audio, featuring NFC for easy pairing and BasXPort technology for enhanced bass.

Prodott Overview

Karatteristiċi Ewlenin

• Teknoloġija NFC: Tap and Play for fuss-free and easy pairing.
• High Performance Wireless Playback: Supports aptX high definition codec for audio quality comparable to a wired connection.
• Ħin tal-logħob estiż: Built-in rechargeable battery provides more than 10 hours of playtime on a single charge.
• Karatteristika tal-Bank tal-Enerġija: Allows charging of your smartphone and other mobile devices.
• Integrated Speakerphone: Built-in microphone for hands-free mobile voice calls, intuitively switching between music and calls.
• BasXPort Technology: Advanced dual-flared bass port tube for clean and high-output bass.
• Disinn portabbli: Integrated handle and built-in battery for easy transport.

Komponenti

The Creative Muvo 20 features a streamlined design with accessible controls and ports. Refer to the images below for visual identification of components.

Figura 1: Quddiem view of the Creative Muvo 20 Portable Wireless Speaker in white, showcasing the speaker grille and control buttons.

Figura 2: Ġenb ma' ġenb view of the Creative Muvo 20 speakers in both white and black, illustrating the compact and portable design.

The top panel typically includes power, volume, and Bluetooth pairing buttons. The side or rear panel houses the charging port (micro USB) and an auxiliary input (3.5mm jack).

Setup

Iċċarġjar lill-Ispeaker

1. Locate the micro USB charging port on the speaker.
2. Connect the provided micro USB cable to the speaker and the other end to a USB power adapter (not included) or a computer's USB port.
3. The charging indicator light will illuminate, typically red, during charging. It will change color or turn off when fully charged.
4. A full charge provides over 10 hours of audio playback.

Tqabbil ma' Apparat Bluetooth

NFC Pairing (Near Field Communication)

1. Ensure NFC is enabled on your smart device.
2. Turn on the Creative Muvo 20 speaker.
3. Tap your NFC-enabled device gently against the NFC detection area on the speaker (usually indicated by an NFC logo).
4. Confirm the pairing request on your device. The speaker will emit an audible confirmation when successfully paired.

Tqabbil Standard tal-Bluetooth

1. Turn on the Creative Muvo 20 speaker.
2. Press and hold the Bluetooth pairing button (often indicated by a Bluetooth icon) until the indicator light flashes, signifying it is in pairing mode.
3. On your smart device, go to Bluetooth settings and search for available devices.
4. Select "Creative Muvo 20" from the list.
5. Once connected, the speaker will provide an audible confirmation, and the Bluetooth indicator light will typically become solid.

Connecting via Auxiliary Input (3.5mm Aux-in)

1. Connect one end of a 3.5mm audio cable (not included) to the auxiliary input port on the Creative Muvo 20.
2. Connect the other end of the cable to the headphone jack or audio output of your audio source device.
3. L-ispiker jaqleb awtomatikament għall-modalità ta' input awżiljarju.

Istruzzjonijiet Operattivi

Qawwa mixgħul/mitfi

• Biex tixgħel, agħfas u żomm il-buttuna tal-Power sakemm id-dawl indikatur jixgħel.
• Biex titfi, agħfas u żomm il-buttuna tal-Qawwa sakemm id-dawl indikatur jintefa.

Daqq Awdjo

• Once connected via Bluetooth or Aux-in, begin playback from your source device.
• Use the Volume Up (+) and Volume Down (-) buttons on the speaker to adjust the audio level.
• For optimal sound quality, ensure the volume on your source device is set to a high level before adjusting the speaker volume.

Funzjonalità tal-Ispeakerphone

• When a call is received while connected via Bluetooth, the music playback will pause.
• Press the Bluetooth button (often also the Play/Pause button) to answer an incoming call.
• Speak into the built-in microphone for hands-free conversation.
• Press the Bluetooth button again to end the call. Music playback will resume automatically.

Karatteristika tal-Bank tal-Enerġija

• The Creative Muvo 20 can be used to charge other mobile devices.
• Locate the USB Type-A output port on the speaker (if available, typically distinct from the micro USB input).
• Connect your mobile device's charging cable to this USB output port.
• Charging will begin automatically. Note that using the power bank feature will reduce the speaker's battery life for audio playback.

Manutenzjoni

Tindif

• Ensure the speaker is powered off and disconnected from all power sources before cleaning.
• Imsaħ l-uċuħ ta’ barra b’ċarruta ratba, niexfa u mingħajr suf.
• Do not use liquid cleaners, aerosols, or solvents, as these may damage the finish or internal components.

Ħażna

• Aħżen l-ispiker f'post frisk u niexef 'il bogħod mix-xemx diretta u minn temperaturi estremi.
• Avoid storing in environments with high humidity or dust.
• Jekk se taħżinha għal perjodu estiż, iċċarġja l-batterija perjodikament (eż., kull 3-6 xhur) biex iżżommha f'saħħitha.

Issolvi l-problemi

If you encounter issues with your Creative Muvo 20, refer to the following common problems and solutions:

No Power / Speaker Not Turning On:

• Ensure the battery is charged. Connect the speaker to a power source and allow it to charge for at least 30 minutes before attempting to power on.
• Verify the charging cable and adapter are functioning correctly.

Ma tistax tikkopja permezz tal-Bluetooth:

• Ensure the speaker is in Bluetooth pairing mode (indicator light flashing).
• Make sure Bluetooth is enabled on your source device and it is within range (typically 10 meters or 33 feet).
• Try turning off and on Bluetooth on your source device.
• If previously paired, try "forgetting" or "unpairing" the speaker from your device's Bluetooth list and then re-pairing.
• Kun żgur li l-ebda apparat ieħor mhu konness mal-ispiker bħalissa.

Ebda Ħsejjes jew Volum Baxx:

• Iċċekkja li l-volum tal-ispiker ikun għoli.
• Ensure the volume on your source device is also turned up and not muted.
• Verify the speaker is correctly connected via Bluetooth or Aux-in.
• If using Aux-in, ensure the cable is fully inserted into both the speaker and the source device.

Audio Distortion at High Volume:

• This can occur if the volume on both the source device and the speaker are set to maximum. Try reducing the volume on either the source device or the speaker.
• Kun żgur li s-sors tal-awdjo huwa ta’ kwalità tajba.

Cannot Charge Mobile Device (Power Bank Function):

• Ensure the speaker has sufficient battery charge.
• Verify that you are using the correct USB output port for charging (if applicable) and not the micro USB input port.
• Check the charging cable for your mobile device for damage.

Speċifikazzjonijiet

Garanzija u Appoġġ

Warranty information for the Creative Muvo 20 Portable Wireless Speaker is typically provided at the time of purchase or included with the product packaging. For detailed warranty terms and conditions, please refer to the documentation supplied with your speaker.

For technical support, product registration, or further assistance, please visit the official Creative website or contact their customer service department. Contact information can usually be found on the Creative webis-sit jew fl-imballaġġ tal-prodott tiegħek.

You can visit the Creative Store for more information: Ħanut Kreattiv fuq Amazon