SIGMA KSF2818 Electronic Safe User Manual

1. Introduzzjoni

Thank you for choosing the SIGMA KSF2818 Electronic Safe. This manual provides essential instructions for the proper setup, operation, and maintenance of your safe. Please read this manual thoroughly before using the product to ensure optimal security and functionality.

2. Informazzjoni Importanti dwar is-Sigurtà

• Do not store the emergency keys or this instruction manual inside the safe. Keep them in a secure, separate location.
• Do not store the user code written down inside the safe. Memorize your code or keep it in a secure, separate location.
• Ensure the safe is securely mounted to prevent unauthorized removal.
• Żomm il-batteriji fejn ma jintlaħaqx mit-tfal.
• Replace batteries promptly when the low battery indicator appears to avoid being locked out.

3. Kontenut tal-Pakkett

Jekk jogħġbok iċċekkja li l-oġġetti kollha huma preżenti fil-pakkett:

• 1 x SIGMA KSF2818 Electronic Safe
• 2 x Ċwievet ta' Override ta' Emerġenza
• Fixing Bolts (for mounting)
• 1 x Manwal tal-Utent (dan id-dokument)

Figure 1: The SIGMA KSF2818 Electronic Safe, featuring a grey finish, an electronic keypad for code entry, and a circular keyhole for emergency access. The brand name "SIGMA" is visible in red on the top right corner of the door.

4. Setup u Installazzjoni

4.1. Installazzjoni tal-batterija

1. Sib il-kompartiment tal-batterija fuq ġewwa tal-bieba tas-safe.
2. Iftaħ l-għatu tal-batterija.
3. Insert 4 x AA batteries (not included) according to the polarity indicators (+/-).
4. Agħlaq l-għatu tal-batterija.
5. A beep sound indicates successful battery installation.

4.2. Issettjar tal-Kodiċi Inizjali

The safe comes with a factory default code (usually "159"). It is crucial to change this immediately.

1. Bil-bieba tas-safe miftuħa, agħfas il-buttuna ħamra tar-reset li tinsab fuq ġewwa tal-bieba, ħdejn iċ-ċappetta. Se tisma' ħoss ta' ħoss.
2. Within 5 seconds, enter your new 3-8 digit code on the keypad.
3. Press the "A" or "#" button to confirm. The safe will beep twice, indicating the new code is set.
4. Test the new code with the door open before closing it.

4.3. Mounting the Safe

The safe features pre-drilled holes for secure mounting to a wall or floor.

1. Choose a suitable location for mounting, ensuring it is a solid surface.
2. Mark the drilling points through the pre-drilled holes inside the safe.
3. Aqta’ toqob pilota fil-ħajt jew fl-art billi tuża drill bit xierqa.
4. Align the safe with the drilled holes and secure it using the provided fixing bolts.
5. Kun żgur li s-safe huwa mwaħħal sew u ma jistax jitneħħa faċilment.

5. Istruzzjonijiet Operattivi

5.1. Opening the Safe with Your Code

1. Enter your 3-8 digit personal code on the keypad.
2. Press the "A" or "#" button to confirm.
3. If the code is correct, a green light will illuminate, and you will hear a beep.
4. Within 5 seconds, turn the knob clockwise to open the safe door.

5.2. Opening the Safe with Emergency Key

In case of forgotten code or dead batteries, use the emergency key:

1. Locate the keyhole cover, usually near the knob. Remove it.
2. Insert one of the emergency keys into the keyhole.
3. Turn the key counter-clockwise while simultaneously turning the knob clockwise to open the safe.
4. Once open, you can replace the batteries if needed or reset your code.

5.3. Closing the Safe

1. Agħlaq il-bieb tas-safe sew.
2. Turn the knob counter-clockwise to lock the door.
3. Ensure the door is securely locked by gently pulling on the door.

6. Manutenzjoni

6.1. Sostituzzjoni tal-batterija

When the batteries are low, the red light will flash, or the safe will beep continuously after entering the code. Replace all four batteries promptly.

1. Open the safe using your code or the emergency key.
2. Iftaħ l-għatu tal-kompartiment tal-batterija fuq ġewwa tal-bieb.
3. Neħħi l-batteriji qodma u armihom b'mod responsabbli.
4. Insert new 4 x AA batteries, observing correct polarity.
5. Agħlaq l-għatu tal-batterija.
6. Your personal code will be retained even after battery replacement.

6.2. Tindif

Naddaf il-barra tas-sejf b'ċarruta ratba u damp drapp. Tużax prodotti tat-tindif jew solventi li joborxu, għax dawn jistgħu jagħmlu ħsara lill-finitura jew lill-komponenti elettroniċi.

7 Issolvi l-problemi

7.1. Safe Does Not Open with Code

• Incorrect Code: Ensure you are entering the correct 3-8 digit code followed by "A" or "#".
• Batteriji Baxxi: If the red light flashes or the safe beeps continuously, replace the batteries. Use the emergency key to open the safe if batteries are completely dead.
• Ħsara tat-Tastiera: If the keypad is unresponsive, try replacing the batteries. If the issue persists, use the emergency key and contact support.

7.2. Safe Door Will Not Close Properly

• Ostruzzjoni: Check for any objects blocking the door or the locking bolts.
• Allinjament ħażin: Ensure the safe is mounted on a flat, stable surface and the door is properly aligned.

8. Speċifikazzjonijiet

9. Garanzija u Appoġġ

Specific warranty information for the SIGMA KSF2818 Electronic Safe is not available in this document. For warranty details, technical support, or service inquiries, please refer to the documentation provided at the time of purchase or contact your retailer or the manufacturer directly.

You may also visit the official SIGMA websit għal aktar għajnuna.