Manwal ta' Istruzzjoni tad-Dawl ta' Taħt il-Kabinett b'Wajer Dirett LED Kichler 12066SS30

1. Informazzjoni Importanti dwar is-Sigurtà

Please read and understand all instructions before beginning installation. Failure to follow these instructions may result in electric shock, fire, or other hazards that could cause property damage or personal injury.

• TWISSIJA: Riskju ta' xokk elettriku. Skonnettja l-provvista tal-enerġija mill-fjuż jew mis-circuit breaker qabel l-installazzjoni jew is-servizz.
• Dan il-prodott għandu jiġi installat skont il-kodiċi tal-installazzjoni applikabbli minn persuna familjari mal-kostruzzjoni u t-tħaddim tal-prodott u l-perikli involuti.
• Uża biss provvista tal-enerġija ta' 120V AC, 60Hz.
• Do not install in wet locations. Suitable for dry locations only.
• Kun żgur li l-konnessjonijiet elettriċi kollha huma sikuri u jikkonformaw mal-kodiċijiet u l-ordinanzi lokali.
• Do not modify the fixture or attempt to repair integrated LED components.

2. Kontenut tal-Pakkett

Iċċekkja li l-komponenti kollha huma preżenti qabel tibda l-installazzjoni:

• LED Undercabinet Light Fixture (1)
• Viti tal-Immuntar (2)
• Konnetturi tal-Wajer (3)
• Istruzzjonijiet għall-Installazzjoni (Dan id-dokument)

Figura 1: Kichler 12066SS30 LED Direct Wire Undercabinet Light. This image displays the stainless steel fixture with its integrated LED light source and rocker switch.

3. Istruzzjonijiet ta 'installazzjoni

3.1 Qabel l-Installazzjoni

1. Itfi l-enerġija: Locate the circuit breaker or fuse box and turn off the power to the area where the light will be installed. Verify power is off using a voltagtester.
2. Iddetermina l-post tal-immuntar: Choose a suitable location under a cabinet, ensuring it is a dry indoor environment.

3.2 Immuntar tal-Fitture

1. Position the fixture against the desired mounting surface.
2. Mark the locations for the mounting screws.
3. Drill toqob pilota jekk meħtieġ.
4. Secure the fixture to the surface using the provided mounting screws. Ensure the fixture is firmly attached.

3.3 Electrical Wiring (Direct Wire)

This fixture is designed for direct wiring to a 120V AC power source.

1. Carefully remove the wiring compartment cover on the fixture.
2. Qabbad id-dħul iswed (hot) wire from the power supply to the iswed wire of the fixture using a wire connector.
3. Qabbad id-dħul abjad (neutral) wire from the power supply to the abjad wire of the fixture using a wire connector.
4. Qabbad id-dħul aħdar or bare copper (ground) wire from the power supply to the aħdar or bare copper wire of the fixture using a wire connector.
5. Ensure all connections are tight and secure. Tuck wires neatly into the wiring compartment and replace the cover.

3.4 Inter-Connectable Feature

This fixture can be inter-connected with other compatible Kichler undercabinet lights for custom runs. Refer to the specific instructions provided with Kichler inter-connectable accessories for proper connection methods.

4. Istruzzjonijiet Operattivi

The Kichler 12066SS30 LED Undercabinet Light features an integrated On/Off rocker switch for easy operation.

• Biex tixgħel id-dawl ON, press the rocker switch to the 'ON' position.
• Biex tixgħel id-dawl OFF, press the rocker switch to the 'OFF' position.

5. Manutenzjoni

The Kichler 12066SS30 LED Undercabinet Light requires minimal maintenance.

• Tindif: Kun żgur li l-elettriku jkun mitfi qabel ma tnaddaf. Imsaħ l-apparat b'ċarruta ratba, niexfa, jew kemxejn imxarrba.amp cloth. Do not use abrasive cleaners or solvents, as they may damage the finish or LED components.
• LEDs: The LED light source is integrated and designed for long-term use. It is not user-replaceable.

6 Issolvi l-problemi

If the light fixture does not operate correctly, refer to the following troubleshooting guide:

If you are unable to resolve the issue, contact Kichler customer support or a qualified electrician.

7. Speċifikazzjonijiet

• Mudell: 12066SS30
• Ditta: Kichler
• Dimensjonijiet: 12.75"T x 4"W x 1"Għ
• Piż tal-oġġett: 1.52 liri
• Temm: Stainless Steel
• Tip ta' Sors tad-Dawl: LED integrat
• Temperatura tal-Kulur: 3000 Kelvin (abjad sħun)
• Wattage: 5 watt
• Luminożità: 225.60 lumens
• Effiċjenza: 40 lumens għal kull watt
• Voltage: 120 Volts
• Tip ta' Installazzjoni: Surface Mount, Direct Wire or Inter-connectable
• Metodu ta' Kontroll: On/Off Rocker Switch
• Użu fuq ġewwa/barra: Indoor use only (Dry locations)

8. Garanzija u Appoġġ

For warranty information or technical support, please contact Kichler customer service. Details regarding specific warranty terms and conditions are typically provided with the product packaging or can be found on the official Kichler websit.

Kichler Websit: www.kichler.com