1. Prodott Aktarview
This manual provides detailed instructions for the safe installation, operation, and maintenance of your Progress Lighting P6064-31 1-Light Wall Lantern. This fixture features an oval form factor with a grid overlay and etched glass shades, finished in black. It is designed for both outdoor and suitable indoor applications.
Figura 1: Quddiem view of the Progress Lighting P6064-31 Wall Lantern.
2. Informazzjoni dwar is-Sigurtà
TWISSIJA: To avoid electric shock, ensure power is turned off at the circuit breaker or fuse box before installation or servicing. All wiring must be in accordance with national and local electrical codes. If you are unsure about wiring, consult a qualified electrician.
- Taqbiżx il-wat massimutage speċifikat għall-bozza.
- Immaniġġja l-komponenti tal-ħġieġ b'attenzjoni biex tevita li jinkisru.
- Żomm materjali fjammabbli 'l bogħod mill-apparat tad-dawl.
3. Kontenut tal-Pakkett
Iċċekkja li l-komponenti kollha huma preżenti qabel tibda l-installazzjoni:
- Wall Lantern Fixture (P6064-31)
- Etched Glass Shade
- Kit tal-Ħardwer tal-Immuntar
- Folja ta 'Installazzjoni
4. Speċifikazzjonijiet
| Karatteristika | Dettall |
|---|---|
| Numru tal-Mudell | P6064-31 |
| Brand | Progress Progress |
| Tip Finish | Finished (Black) |
| Dimensjonijiet tal-Prodott | 16.13"T x 9.25"W x 6.13"Għ |
| Piż tal-oġġett | 4.63 Liri |
| Tip ta 'Immuntar | Jisporġu 'l barra |
| Livell ta 'Reżistenza għall-Ilma | Reżistenti għall-Ilma |
| Sors tad-Dawl Wattage | 100 Watt (Mass) |
| Voltage | 120 Volts |
| Output Massimu tad-Dawl | 1600 Lumens |
| Tip ta' Sors tad-Dawl | Inkandexxenti (Bażi Medja) |
| Materjal | Aluminju |
Figure 2: Product dimensions for the P6064-31 Wall Lantern.
5. Istruzzjonijiet ta 'installazzjoni
5.1 Qabel l-Installazzjoni
- Itfi l-enerġija fis-circuit breaker jew fil-kaxxa tal-fjusijiet.
- Carefully unpack the fixture and inspect for any damage.
- Ensure all parts listed in Section 3 are present.
5.2 Sizing and Placement Guidance
Proper sizing and placement are crucial for optimal illumination and aesthetic appeal. Refer to the video below for visual guidance.
Video: Outdoor Lighting - Sizing and Selection. This video provides guidance on selecting the appropriate size and mounting height for outdoor lighting fixtures, including wall lanterns, for entryways and garages.
- Daqs tal-apparat: For entrances and garages, select fixtures that measure 1/4 to 1/3 of the door's height.
- Għoli tal-Immuntar: Mount fixtures at eye level, approximately 5.5 to 6 feet from the ground to the fixture's center.
- Entrance Doors: Mount lights on either side of the door, 8 to 10 feet apart.
- Bibien tal-Garaxx: For a one-car garage, use a single wall lantern. For two or more car garages, mount lights on either side of the doors, or across the top of the doors for even illumination.
Figura 3: Eżample of wall lantern placement for an entryway.
Figura 4: Eżample of wall lantern placement for a garage.
5.3 Wiring u Immuntar
- Waħħal il-parentesi tal-immuntar mal-kaxxa tal-junction billi tuża l-viti pprovduti.
- Connect the fixture's wires to the house wires: black to black (live), white to white (neutral), and bare copper (ground) to the house ground wire and the mounting bracket. Secure connections with wire nuts.
- B'attenzjoni daħħal il-wajers kollha fil-kaxxa tal-junction.
- Allinja l-apparat mal-bracket tal-immuntar u waħħalha bil-viti jew il-ġewż provduti.
5.4 Installazzjoni tal-Bozza
- Insert one medium base incandescent bulb (not included) into the socket.
- Taqbiżx il-wat massimutage ta '100 Watts.
- Install the etched glass shade by carefully placing it over the bulb and securing it according to the specific instructions on the included installation sheet.
6. Istruzzjonijiet Operattivi
Once installed and powered, operate the wall lantern using the standard wall switch connected to the fixture's circuit. Ensure the bulb is correctly installed and the power is on at the circuit breaker.
7. Manutenzjoni
To maintain the appearance and functionality of your fixture:
- Tindif: Turn off power before cleaning. Wipe the fixture with a soft, damp drapp. Tużax prodotti tat-tindif jew solventi li joborxu, għax jistgħu jagħmlu ħsara lill-finitura jew lill-ħġieġ.
- Sostituzzjoni tal-bozza: Turn off power before replacing the bulb. Allow the bulb to cool completely. Replace with a new medium base incandescent bulb, not exceeding 100 Watts.
8 Issolvi l-problemi
If your fixture is not operating correctly, refer to the following common issues:
| Problema | Kawża Possibbli | Soluzzjoni |
|---|---|---|
| Id-dawl ma jixgħelx | L-ebda qawwa għall-apparat | Check circuit breaker, wall switch, and wiring connections. |
| Il-bozza tinħaraq | Ibdel il-bozza. | Kun żgur li l-bozza hija mwaħħla sew. |
| Dawl teptip | Konnessjoni tal-bozza jew tal-wajers maħlula | Tighten bulb. Check wiring connections (with power off). |
| Fixture is dim | Bozza mhux korretta wattage | Żgura bozza wattage is appropriate and not too low. |
9. Garanzija u Appoġġ
Dan l-apparat tad-Dawl Progress huwa kopert minn Garanzija Limitata ta' senaDin il-garanzija tiggarantixxi s-sodisfazzjon sħiħ tiegħek max-xiri tiegħek u tinkludi appoġġ professjonali għas-servizz tal-konsumatur wara l-bejgħ.
For warranty claims or technical assistance, please refer to the contact information provided on your purchase receipt or visit the official Progress Lighting websit.
