1. Matulview
The Arrow GT31LI 30-Watt Cordless Hot Melt Mini Glue Gun is designed for a variety of crafting, DIY, and repair projects. Featuring a lithium-ion battery, it provides up to 100 minutes of continuous use on a single charge. The glue gun heats up rapidly, typically within one minute, allowing for quick project starts. Its compact and lightweight design ensures ease of handling and portability.

Figure 1: The Arrow GT31LI 30-Watt Cordless Hot Melt Mini Glue Gun, showcasing id-disinn kompatt tiegħu u l-iskema ta' kuluri aħmar/iswed.
2. Istruzzjonijiet tas-Sigurtà
- Hot Nozzle: Iż-żennuna u l-kolla mdewba jisħnu ħafna. Evita kuntatt dirett mal-ġilda biex tevita ħruq.
- Ventilazzjoni: Uża l-pistola tal-kolla f'żona ventilata tajjeb.
- Ħażna: Always place the glue gun on its integrated stand when not in use to prevent melted glue from dripping onto surfaces. Store in a cool, dry place away from children.
- Tifi Awtomatiku: The glue gun features an automatic shut-off after five minutes of inactivity to enhance safety and conserve battery life.
- Iċċarġjar: Charge the device only with a 5V output adapter using the provided USB cable. Using an incorrect adapter may cause charging failure.
- Glue Sticks: Use only 5/16-inch diameter mini glue sticks. Incorrect sizes may cause feeding issues or damage to the gun.
- Tfal: Keep out of reach of children. Adult supervision is required if children are using the tool.
3. Komponenti Inklużi
- Arrow GT31LI 30-Watt Cordless Hot Melt Mini Glue Gun
- Lithium-Ion Battery (integrated)
- Cable tal-Iċċarġjar tal-USB
- Mini Glue Sticks (quantity may vary, typically 24 included)
4. Setup
- Ħlas Inizjali: Before first use, fully charge the glue gun's integrated lithium-ion battery using the provided USB charging cable and a compatible 5V output adapter. The charging indicator light will show charging status.
- Daħħal Glue Stick: Insert a 5/16-inch diameter mini glue stick into the loading chamber at the rear of the glue gun. Push it gently until it stops.
5. Istruzzjonijiet Operattivi
- Qawwa Mixgħul: Press and hold the power button (usually located near the handle) for a few seconds until the indicator light illuminates.
- Tisħin: The glue gun will begin to heat up. The indicator light may change color or blink to show it's heating. It typically reaches operating temperature within one minute.
- L-applikazzjoni tal-kolla: Once the glue gun is heated and the indicator light signals readiness (e.g., solid green), gently squeeze the trigger to dispense melted glue. Apply glue to the desired surface.
- Tifi Awtomatiku: If the glue gun is left idle for approximately five minutes, it will automatically power off to prevent overheating and save battery. To resume operation, simply press the power button again.
- Itfi: To manually turn off the glue gun, press and hold the power button until the indicator light turns off.
6. Manutenzjoni
- Tindif: Ensure the glue gun is completely cool before cleaning. Gently wipe the exterior with a damp cloth. Do not use abrasive cleaners or immerse the gun in water.
- Kura taż-żennuna: Do not attempt to clean the nozzle while the gun is hot. Any hardened glue around the nozzle can usually be carefully removed once the gun is cool.
- Ħażna: Store the glue gun in a clean, dry place. Ensure no glue stick is left partially melted in the chamber during long-term storage.
7 Issolvi l-problemi
| Problema | Kawża Possibbli | Soluzzjoni |
|---|---|---|
| Il-pistola tal-kolla ma tisħonx. | Il-batterija hija baxxa jew eżawrita. | Charge the battery fully using the provided USB cable and a 5V adapter. |
| Glue is not dispensing. | Glue stick is not fully inserted or is the wrong size. | Ensure a 5/16-inch glue stick is fully inserted. Allow adequate heating time. |
| Glue gun shuts off unexpectedly. | Auto shut-off feature activated due to inactivity. | Press the power button to turn it back on. |
8. Speċifikazzjonijiet
- Mudell: GT31LI
- Ditta: Qafliet tal-Vleġġa
- Wattage: 30 watt
- Batterija: 1 Lithium Ion (inkluż)
- Ħajja tal-batterija: Sa 100 minuta fuq ħlas wieħed
- Ħin tat-tisħin: 1 minuta jew inqas
- Dijametru tal-Stick tal-Kolla: 5/16-il pulzier
- Kulur: Aħmar
- Materjal: Plastik
- Piż tal-oġġett: 11.6 uqija
- Materjali Kompatibbli: Cardboard, Cotton, Fabric, Leather, Plastic
- Komponenti Inklużi: Glue gun, USB charging cable
9. Garanzija u Appoġġ
For warranty information or technical support, please refer to the documentation included with your product or visit the official Arrow Fastener websit. Żomm l-irċevuta tax-xiri tiegħek għal pretensjonijiet ta' garanzija.





