Manwal tal-Utent tal-Qarrej ta' Medda Twila tal-HID iCLASS R90

Introduzzjoni

This manual provides comprehensive instructions for the installation, operation, and maintenance of the HID iCLASS R90 Long Range Reader (Model: 940NTNTEK00000). The R90 is designed for secure and reliable long-range identification in various access control applications. It supports iCLASS SE, standard iCLASS, Wiegand, and terminal configurations, operating with a 32-bit output and standard 1-second read time, without proximity functionality.

Figura 1: Quddiem view of the HID iCLASS R90 Long Range Reader. This image shows the device's sleek black casing, a prominent red light bar along the top edge indicating operational status, and the subtle, embossed HID logo near the bottom center. The reader has a textured matte finish.

Informazzjoni dwar is-Sigurtà

Please read all safety instructions carefully before installing or operating the device. Failure to follow these instructions may result in injury, damage to the device, or voiding of the warranty.

Kun żgur li l-enerġija hija skonnettjata qabel ma twettaq kwalunkwe installazzjoni jew manutenzjoni.
Persunal kwalifikat biss għandu jinstalla u jagħmel manutenzjoni fuq dan it-tagħmir.
Tesponix l-apparat għal temperaturi estremi, umdità, jew dawl tax-xemx dirett.
Evita li tpoġġi l-apparat ħdejn kampi elettromanjetiċi qawwija.
Uża biss aċċessorji u provvisti tal-enerġija approvati mill-manifattur.

Kontenut tal-Pakkett

Ivverifika li l-oġġetti kollha huma preżenti fil-pakkett qabel ma tipproċedi bl-installazzjoni:

1 x HID iCLASS R90 Long Range Reader (Model: 940NTNTEK00000)
1 x Installation Guide (Printed or Digital)
Mounting Hardware (Screws, anchors, etc.)

Setup u Installazzjoni

Installazzjoni xierqa hija kruċjali għal prestazzjoni ottimali. Segwi dawn il-passi bir-reqqa:

Għażla tas-Sit: Choose a mounting location that provides clear line-of-sight to the intended read area and is protected from severe weather conditions if installed outdoors.
Immuntar:
- Secure the mounting bracket (if applicable) to the wall or pole using the provided hardware.
- Attach the R90 reader to the mounting bracket, ensuring it is firmly in place.
Wiring:
- Connect the reader's wiring harness to the access control panel according to the wiring diagram provided in the separate installation guide. Pay close attention to power (VDC), ground (GND), data lines (Data 0, Data 1), and LED control lines.
- Kun żgur li l-konnessjonijiet kollha huma siguri u iżolati.
Qawwa Mixgħul: Apply power to the access control system. The reader's indicator light should illuminate, typically red or green, indicating power and readiness.

Istruzzjonijiet Operattivi

The HID iCLASS R90 reader operates by reading iCLASS credentials presented within its read range. The operational status is indicated by the integrated LED.

Credential Presentation: Present a compatible iCLASS credential (card, fob, etc.) within the reader's effective read range. The optimal range will vary based on environmental factors and credential type.
Dawl Indikatur:
- Aħmar: Indicates power is applied and the reader is in standby mode.
- Green (or flashing): Indicates a successful read and data transmission to the access control panel.
- Nota: Specific LED behavior may be configurable via the access control system.
Trażmissjoni tad-Data: Upon a successful read, the reader transmits the credential data to the connected access control panel via the Wiegand interface. The panel then processes the data to grant or deny access.

Manutenzjoni

The HID iCLASS R90 reader is designed for minimal maintenance. Regular cleaning and inspection can help ensure long-term reliability.

Tindif:
- Gently wipe the reader's surface with a soft, damp drapp.
- Tużax prodotti tat-tindif li joborxu, solventi, jew kimiċi ħarxa.
- Kun żgur li l-ebda likwidu ma jidħol fl-apparat.
Spezzjoni: Periodically check the mounting and wiring connections for any signs of wear, corrosion, or loosening.
Aġġornamenti tal-Firmware: Consult your access control system administrator or HID support for information on available firmware updates, which may improve performance or add features.

Issolvi l-problemi

If you encounter issues with your HID iCLASS R90 reader, refer to the following common problems and solutions:

Problema	Kawża Possibbli	Soluzzjoni
Reader not powering on (no LED light)	No power supply; faulty wiring; damaged reader.	Check power connections and source. Verify wiring to the access control panel. If issues persist, contact support.
Reader not reading credentials	Incompatible credential; credential too far; interference; faulty reader.	Ensure credential is iCLASS compatible. Present credential closer to the reader. Check for nearby metallic objects or strong RF sources. Test with a known good credential.
Reader reads, but access is denied	Access control panel issue; credential not enrolled; incorrect permissions.	Verify credential enrollment in the access control system. Check user permissions and time schedules. Consult the access control panel's manual.

If the problem persists after attempting these solutions, please contact HID Global technical support.

Speċifikazzjonijiet

Key technical specifications for the HID iCLASS R90 Long Range Reader:

Numru tal-Mudell: 940NTNTEK00000
Ditta: HID
Manifattur: HID Globali
Deskrizzjoni: R90 ICLS SE, STD, WG, TERM, BLK, BLA PRX, 32BIT, STD 1 SEK
Dimensjonijiet tal-pakkett: 15.8 x 15 x 2.8 pulzieri (40.13 x 38.1 x 7.11 ċm)
Piż tal-oġġett: 4.59 liri (2.08 kg)
UPC: 639399038402
Kompatibilità: iCLASS SE, standard iCLASS credentials
Output: Wiegand (32-bit)
Karatteristiċi: Long Range, No Proximity Functionality

Garanzija u Appoġġ

For warranty information, technical support, or service requests, please contact HID Global directly or refer to their official website. Keep your purchase receipt and product model number (940NTNTEK00000) readily available when contacting support.

Uffiċjal Globali tal-HID Websit: www.hidglobal.com

	Gwida għall-Utent tal-App HID Reader Manager (iOS) - Immaniġġja l-Qarrejja tal-Kontroll tal-Aċċess Esplora l-Gwida għall-Utent tal-App HID Reader Manager għall-iOS. Tgħallem kif tinstalla, tikkonfigura, u timmaniġġja l-qarrejja HID Signo u iCLASS SE, taġġorna l-firmware, u ssolvi kwistjonijiet komuni għal sigurtà mtejba tal-kontroll tal-aċċess.
	Gwida għall-Installazzjoni tal-HID iCLASS SE R90 Din il-gwida għall-installazzjoni tipprovdi struzzjonijiet dettaljati għall-qarrej mingħajr kuntatt HID iCLASS SE R90, inkluża lista tal-partijiet, speċifikazzjonijiet tekniċi, dijagrammi tal-wajers, proċeduri tal-immuntar, u karatteristiċi fakultattivi għal sistemi ta' kontroll tal-aċċess.
	Gwida għall-Utent tal-Qarrej Bijometriku HID Signo 25B Gwida għall-utent għall-HID Signo Biometric Reader 25B, li tiddeskrivi l-ispeċifikazzjonijiet tal-ħardwer, il-wajers, il-konnessjonijiet tas-sistema, il-proċeduri ta' reġistrazzjoni tal-marki tas-swaba', u glossarju tat-termini.
	Gwida għall-Installazzjoni tal-Qarrej HID iCLASS SE Express R10 Dan id-dokument jipprovdi gwida komprensiva għall-installazzjoni tal-HID iCLASS SE Express R10 Reader, li jkopri l-partijiet fornuti, l-ispeċifikazzjonijiet, il-passi tal-installazzjoni, u l-karatteristiċi fakultattivi.
	Gwida għall-Qarrejja tal-HID Signo: Nifhmu n-Numri tal-Partijiet Gwida għall-fehim tan-numri tal-partijiet tal-qarrej HID Signo, li tispjega t-tifsira ta' kodiċijiet differenti għall-istil, l-għażliet tat-tastiera, u l-kompatibilità tat-teknoloġija.
	Gwida għall-Installazzjoni tal-Qarrej tal-Kards Intelliġenti HID OMNIKEY \| Mudelli 1021-6121 Installation guide for HID OMNIKEY Smart Card Readers, covering models 1021, 3021, 3121, 5021, 5022, 5023, 5025, 5027, 5127, 5421, 5422, 5427, and 6121. Includes specifications, installation steps, and regulatory compliance information.

HID 940NTNTEK00000