Steinbach 040917

Manwal tal-Utent tal-Pompa tal-Filtru Awto-Priming Steinbach SPS 100-1T

Mudell: 040917

1. Prodott Aktarview

The Steinbach SPS 100-1T self-priming filter pump is designed to be the central component of your pool's circulation system. This robust pump features a pre-filter and an integrated timer, making it suitable for pools up to approximately 40,000 liters (10,567 gallons) in volume. It operates on 230V/550W power and offers a pumping capacity of 9,480 liters per hour (158 l/min) with a maximum pump height of 10 meters.

The pump is designed for durability and efficiency, ensuring clean and clear pool water. It is compatible with hose connections of Ø 32/38 mm and can operate with water temperatures up to 35 °C.

Steinbach SPS 100-1T Self-Priming Filter Pump

Figura 1: Aktarview of the Steinbach SPS 100-1T Self-Priming Filter Pump. This image shows the complete pump unit, including the motor, pump housing, and pre-filter basket.

2. Istruzzjonijiet tas-Sigurtà

3. Setup u Installazzjoni

3.1 Disimballaġġ

Neħħi bir-reqqa l-komponenti kollha mill-imballaġġ. Ivverifika li l-partijiet kollha huma preżenti u mhux imħassra. Irreferi għal-lista tal-ippakkjar għal inventarju sħiħ.

3.2 Tqegħid

Position the pump on a firm, level surface, preferably below the water level of the pool for optimal self-priming. Ensure adequate ventilation around the pump to prevent overheating. The pump should be placed in a location protected from direct sunlight and adverse weather conditions.

3.3 Konnessjoni tal-Pajpijiet

Connect the pool's suction line to the inlet of the pump (the side with the pre-filter) and the return line to the outlet. The pump is designed for Ø 32/38 mm hose connections. Secure all hose connections with appropriate clamps biex jipprevjenu tnixxijiet.

Pump pre-filter inlet with hose connection

Figura 2: Close-up view of the pre-filter inlet with a hose connected. This shows the transparent pre-filter housing and the connection point for the pool's suction hose.

Pump outlet with hose connection

Figura 3: Close-up view of the pump outlet with a hose connected. This illustrates the connection point for the pool's return hose.

3.4 Priming tal-Pompa

Before first use, or after the pump has been drained, it must be primed. Open the pre-filter lid and fill the pre-filter basket and pump housing completely with water. Replace the lid securely. This ensures the pump does not run dry, which can cause damage.

Pump pre-filter inlet without hose

Figura 4: View of the pre-filter inlet without a hose attached. This shows the threaded connection for the pre-filter housing.

Pump outlet without hose

Figura 5: View of the pump outlet without a hose attached. This shows the threaded connection for the outlet hose.

3.5 Konnessjoni Elettrika

Connect the pump to a grounded 230V power outlet. Ensure the electrical circuit is protected by a Residual Current Device (RCD) for safety. Do not use extension cords unless absolutely necessary, and ensure they are rated for outdoor use and the pump's power requirements.

4. Istruzzjonijiet Operattivi

4.1 Starting and Stopping the Pump

Once the pump is primed and all connections are secure, press the ON/OFF button on the control panel to start the pump. Press it again to stop the pump.

4.2 Using the Integrated Timer

The SPS 100-1T pump features an integrated timer for automated operation. Use the TIMER button to set the desired operating duration. The control panel typically has indicators for various time settings (e.g., 2, 4, 6, 8, 10, 12, 14, 16, 24 hours). Select the appropriate duration based on your pool's size and usage to ensure adequate filtration.

Pump control panel with ON/OFF and TIMER buttons

Figura 6: Close-up view of the pump's control panel. This image highlights the ON/OFF and TIMER buttons, along with the indicators for setting the filtration duration.

4.3 Optimal Filtration Time

For optimal water quality, it is generally recommended to filter the entire volume of your pool water at least once per day. The required filtration time depends on the pump's flow rate and your pool's volume. For this pump with a flow rate of 9,480 l/h, a 40,000-liter pool would require approximately 4.2 hours of filtration per day (40,000 L / 9,480 L/h ≈ 4.2 h).

5. Manutenzjoni

5.1 Cleaning the Pre-Filter Basket

The pre-filter basket collects larger debris and should be cleaned regularly to maintain pump efficiency.

  1. Turn off the pump and disconnect it from the power supply.
  2. Ħoll l-għatu trasparenti tal-pre-filtru.
  3. Remove the pre-filter basket and empty any collected debris.
  4. Rinse the basket thoroughly with clean water.
  5. Spezzjona s-siġill tal-O-ring fuq l-għatu għal ħsara u kun żgur li huwa nadif.
  6. Place the clean basket back into the housing and securely screw on the lid.
  7. Erġa' ħejji l-pompa jekk meħtieġ qabel ma terġa' tibdaha.

5.2 Winterization

Before the first frost, the pump must be drained and stored in a frost-free environment.

6 Issolvi l-problemi

ProblemaKawża PossibbliSoluzzjoni
Il-pompa ma tibdaxEbda provvista tal-enerġija; circuit breaker li qata’; wajers difettużi.Check power connection; reset circuit breaker; inspect wiring (consult electrician if unsure).
Fluss ta 'ilma baxxClogged pre-filter; air in the system; restricted hoses; low water level in pool.Clean pre-filter basket; re-prime pump; check hoses for kinks/blockages; ensure adequate pool water level.
Il-pompa hija storbjużaAir in the system; debris in impeller; pump running dry; loose connections.Re-prime pump; clean impeller (professional service recommended); ensure pump is always filled with water; tighten all connections.
Ilma inixxi mill-pompaLoose hose connections; damaged O-rings/seals; cracked housing.Issikka l-pajp clamps; inspect and replace O-rings/seals; contact support for housing damage.

7. Speċifikazzjonijiet Tekniċi

KaratteristikaSpeċifikazzjoni
Numru tal-Mudell040917
ManifatturSteinbach
Voltage230 Volts
Qawwa550 W
Max Rata tal-Fluss9,480 Litres per hour (158 l/min)
Max Pump Height10-il metru
Konnessjoni tal-mankaØ 32/38 mm
Temperatura massima tal-ilma35 °C
Volum Max Pool40,000 Litru
Livell ta' StorbjuAppross. 70 dB
MaterjalStainless steel (internal components), Plastic (housing)
Dimensjonijiet (Pakkett)45.4 x 24.8 x 20.8 ċm
Piż6.14 Kilogrammi
KaratteristiċiSelf-priming, Integrated timer, Pre-filter

8. Garanzija u Appoġġ

This product comes with a standard manufacturer's warranty. Please refer to your purchase documentation for specific warranty terms and conditions. For technical support, spare parts, or warranty claims, please contact Steinbach customer service or your authorized dealer.

Informazzjoni ta' Kuntatt ta' Steinbach:

Jekk jogħġbok żomm in-numru tal-mudell tiegħek (040917) u d-data tax-xiri lesti meta tikkuntattja l-appoġġ.

Dokumenti Relatati - 040917

Preview Pompi tal-filtru Steinbach bil-manwal tat-tajmer/mingħajru
Gwida komprensiva għall-pompi tal-filtru Steinbach bit-tajmers u mingħajrhom, li tkopri l-installazzjoni, it-tħaddim, is-sigurtà, u s-soluzzjoni tal-problemi.
Preview Steinbach Filterpumpe SPS 175-1T Bedienungsanleitung
Finden Sie detaillierte Informationen zur Bedienung, Wartung und Sicherheit der Steinbach Filterpumpe SPS 175-1T. Diese Anleitung enthält Anleitungen zur Installation, zum Betrieb und zur Fehlerbehebung für Ihre Poolfilterpumpe.
Preview Steinbach Poolrunner SMART RXB 450 Pool Cleaner - Manwal tal-Utent
Manwal komprensiv għall-utent għall-Steinbach Poolrunner SMART RXB 450, li jkopri s-setup, it-tħaddim, il-manutenzjoni, is-soluzzjoni tal-problemi, u l-ispeċifikazzjonijiet tekniċi. Tgħallem kif tuża l-pixxina tiegħek b'mod effettiv u sikur.
Preview Manwal tas-Sistema tal-Ilma Mielħa Salty de Luxe P4/P6 - Steinbach
Manwal ta' struzzjonijiet komprensiv għas-sistemi professjonali ta' pixxini tal-ilma mielaħ Steinbach Salty de Luxe P4 u P6. Ikopri l-installazzjoni, it-tħaddim, il-manutenzjoni, is-soluzzjoni tal-problemi, u l-linji gwida tas-sigurtà.
Preview Tapit Solari għall-Pixxini Steinbach Speedsolar - Manwal tal-Installazzjoni u tal-Utent
Manwal komprensiv għall-utent għall-Steinbach Speedsolar Pool Solar Mat (0.7x3.0m u 0.7x6.0m). Jinkludi gwida għall-installazzjoni, struzzjonijiet dwar is-sigurtà, speċifikazzjonijiet tekniċi, u s-soluzzjoni tal-problemi.
Preview Steinbach Speedclean Classic Sandfilter Bedienungsanleitung
Umfassende Bedienungsanleitung für den Steinbach Speedclean Classic Sandfilter. Enthält Anleitungen zu Installazzjoni, Inbetriebnahme, Wartung und Fehlerbehebung für eine optimale Poolwasserfiltration.