Manwal tal-Utent tal-Gateway VoIP GSM ta' 8 Kanali Yeastar NeoGate TG800

1. Introduzzjoni

This manual provides detailed instructions for the installation, configuration, and operation of the Yeastar NeoGate TG800 8-Channel VoIP GSM Gateway. The TG800 is designed to bridge GSM networks with IP-based systems, enabling cost-effective communication solutions for homes and small offices.

Figura 1: Quddiem view of the Yeastar NeoGate TG800, showing the eight GSM antennas, Ethernet ports, and status indicator lights.

2. Setup

2.1 Kontenut tal-Pakkett

Ivverifika li l-oġġetti kollha huma preżenti fil-pakkett:

• Yeastar NeoGate TG800 Unit
• Adapter tal-Enerġija
• Cable Ethernet
• GSM Antennas (8 units)
• Gwida ta 'Installazzjoni Mgħaġġla

2.2 Installazzjoni Fiżika

1. Waħħal Antenni: Screw the eight GSM antennas onto the corresponding connectors on the rear panel of the TG800.
2. Daħħal il-Kards tas-SIM: Locate the SIM card slots on the front panel. Insert up to eight standard SIM cards into the slots, ensuring correct orientation.
3. Qabbad il-Kejbil tan-Netwerk: Connect one end of the Ethernet cable to the LAN port on the TG800 and the other end to your network router or switch.
4. Qabbad l-Enerġija: Connect the power adapter to the TG800's power input and then plug it into an electrical outlet. The device will power on automatically.

2.3 Konfigurazzjoni Inizjali tan-Netwerk

By default, the TG800 obtains an IP address via DHCP. To access the web interface:

1. Identify the IP address assigned to the TG800 using your router's DHCP client list or a network scanning tool.
2. Iftaħ a web browser and enter the IP address of the TG800.
3. Log in using the default username and password (refer to the Quick Installation Guide for default credentials).
4. Configure network settings (Static IP, DHCP Client, VLAN) as required for your network environment.

3. Istruzzjonijiet Operattivi

3.1 Web Interface fuqview

Il- web interface provides comprehensive control over the TG800's functions, including:

• Status: Monitor system status, GSM module status, and network connectivity.
• Trunks: Configure SIP and IAX2 trunks for connecting to IP PBXs or VoIP service providers.
• Rottaġġ tas-Sejħiet: Set up inbound and outbound call routes between GSM and VoIP.
• GSM Settings: Manage SIM card settings, SMS, and USSD operations.
• Issettjar tas-Sistema: Configure time, date, firmware updates, and user accounts.

3.2 Basic Call Functionality

Once configured, the TG800 facilitates calls between the GSM network and your VoIP system.

• Outbound Calls: Calls from your IP PBX or VoIP phones are routed through the TG800 to the GSM network based on configured outbound routes.
• Sejħiet 'il ġewwa: Calls received on the GSM SIM cards are routed through the TG800 to your IP PBX or specific VoIP extensions based on configured inbound routes.

4. Manutenzjoni

4.1 Aġġornamenti tal-Firmware

Regularly check the Yeastar website for firmware updates. Updating the firmware ensures optimal performance, security, and access to new features.

1. Niżżel l-aħħar firmware file from the official Yeastar support portal.
2. Access the TG800 web interface.
3. Navigate to the System Settings > Firmware Upgrade section.
4. Tella l-firmware mniżżel file and follow the on-screen instructions. Do not power off the device during the upgrade process.

4.2 Tindif u Kura

Żomm l-apparat nadif u ħieles mit-trab.

• Uża drapp artab u niexef biex timsaħ il-parti ta' barra.
• Evita li tuża cleaners likwidi jew materjali li joborxu.
• Żgura ventilazzjoni xierqa madwar l-apparat biex tevita sħana żejda.

5 Issolvi l-problemi

5.1 Kwistjonijiet Komuni u Soluzzjonijiet

• Ebda Qawwa:

  Kun żgur li l-adapter tal-enerġija huwa konness sew kemm mal-apparat kif ukoll ma' sokit elettriku li jaħdem.

• Ebda Konnettività man-Netwerk:

  Check the Ethernet cable connection. Verify network settings in the web interface. Confirm your router is assigning an IP address or that static IP settings are correct.

• GSM Modules Not Registering:

  Ensure SIM cards are correctly inserted and active. Check antenna connections. Verify GSM signal strength in the web interface. Contact your mobile operator if issues persist.
• Calls Not Connecting:

  Review SIP trunk configurations and call routing rules in the web interface. Check firewall settings on your network to ensure SIP/IAX2 ports are open.

5.2 Indikaturi LED

The front panel LEDs provide status information:

• LED tal-qawwa: Solid green indicates power on.
• LED tas-sistema: Indicates system status (e.g., blinking for normal operation, solid for boot-up).
• LED LAN: Jindika l-istatus u l-attività tal-link tal-Ethernet.
• GSM Channel LEDs: Indicate the status of each GSM module (e.g., solid for registered, blinking for activity, off for unregistered).

6. Speċifikazzjonijiet

7. Garanzija u Appoġġ

7.1 Garanzija tal-Prodott

The Yeastar NeoGate TG800 is covered by a manufacturer's warranty. Please refer to the warranty card included with your product or visit the official Yeastar websit għal termini u kundizzjonijiet dettaljati tal-garanzija. Żomm il-prova tax-xiri tiegħek għal talbiet ta' garanzija.

7.2 Appoġġ Tekniku

For technical assistance, troubleshooting, or further inquiries, please contact Yeastar technical support through their official website. Online resources, including FAQs, knowledge bases, and forums, may also be available.

Yeastar Official Websit: www.yeastar.com