AIMS Power PICOGLF10W12V120VR Pure Sine Inverter Charger User Manual

Prodott Overview

The AIMS Power PICOGLF10W12V120VR is a 1000 Watt continuous, 3000 Watt surge, 12 VDC input to 120 VAC output pure sine inverter charger. This heavy-duty unit is designed to provide reliable backup power for essential household appliances during outages, or for use in RVs, boats, campsites, and other off-grid applications. It features an integrated 35A smart battery charger capable of handling 8 different battery technologies, including Lead, Gel, AGM, and LiFePO4.

The inverter charger can accept 120V AC power from various sources, such as a gas or diesel generator, shore power, or a standard wall outlet, to charge connected batteries. Its low frequency design allows for a significant 3000 watt surge capacity for up to 20 seconds, accommodating high startup current demands from appliances.

Informazzjoni dwar is-Sigurtà

WARNING: This product may contain materials cautioned by California Proposition 65. Always follow all local and national electrical codes during installation and operation.

• Read all instructions before operating the inverter charger.
• Do not expose the unit to rain, snow, spray, or bilge water.
• Żgura ventilazzjoni xierqa madwar l-unità biex tevita sħana żejda.
• Do not operate the inverter charger if it has received a sharp blow, been dropped, or otherwise damaged.
• Tiżżarmax l-unità. Irreferi għas-servizz lil persunal kwalifikat.
• To reduce the risk of electric shock, disconnect the inverter charger from the battery and AC power before attempting any maintenance or cleaning.
• Ensure all wiring is correctly sized and properly terminated.
• Install appropriate overcurrent protection for both DC and AC circuits.

Karatteristiċi u Komponenti tal-Prodott

Front Panel Overview

This image displays the front panel of the AIMS Power Inverter Charger. Key components visible include the standard 120V AC output socket (GFCI outlet) for connecting appliances, and the AC input socket for connecting to shore power or a generator. Also visible are the circuit breaker buttons for charger input and inverter output protection.

Il-Panew ta 'wara Matulview

Din l-immaġni tipprovdi deskrizzjoni dettaljata view of the rear panel of the AIMS Power Inverter Charger, highlighting various connection points and controls. Labeled components include the DC Terminals (positive and negative) for battery connection, the Charge Current Control Dial, On/Off Power Switch, Dip Switches for configuration, LCD Remote Port, LED Remote Port, Auto Generator Start terminal, Battery Temp Sensor port, and the Grounding DC Terminal.

• 1000W Continuous Power: Provides stable 1000 watts of pure sine wave AC power.
• Kapaċità ta 'żieda ta' 3000W: Handles high startup loads for up to 20 seconds.
• 12VDC Input to 120VAC Output: Converts 12-volt DC battery power to standard 120-volt AC household power.
• Integrated 35A Smart Battery Charger: Supports 8 battery technologies (Lead, Gel, AGM, LiFePO4, etc.).
• Swiċċ tat-Trasferiment Awtomatiku: Seamlessly switches between inverter power and incoming AC power (shore/generator).
• Protezzjonijiet: Includes overload, over temperature, high/low voltage, short circuit, and internal fusing.
• Outlet tal-GFCI: Provides ground fault circuit interrupter protection for connected devices.
• Dial tal-Kontroll tal-Kurrent tal-Iċċarġjar: Allows adjustment of the battery charging current.
• Dip Switches: Configurable settings for various operational priorities and modes.
• Auto Gen Start: Feature to automatically start a compatible generator when battery voltage huwa baxx.
• Mod ta 'Enerġija Iffrankar: Reduces idle power consumption.
• Sensor tat-temperatura tal-batterija: Optimizes charging based on battery temperature.

Setup u Installazzjoni

Proper installation is crucial for the safe and efficient operation of your AIMS Power Inverter Charger. It is recommended that installation be performed by a qualified electrician or technician.

1. Mounting the Inverter Charger

• Choose a dry, cool, and well-ventilated location.
• Mount the unit horizontally on a flat, non-combustible surface.
• Ensure at least 30cm (12 inches) of clear space around the cooling fan and vents for proper airflow.
• Avoid mounting in direct sunlight or near heat sources.

2. DC Wiring (Battery Connection)

Connect the inverter charger directly to your 12V battery bank using appropriately sized cables. Use heavy-gauge, low-resistance cables to minimize voltage drop u tiżgura trasferiment effiċjenti tal-enerġija.

• Qabbad it-terminal pożittiv (+) tal-inverter mat-terminal pożittiv (+) tal-bank tal-batterija.
• Qabbad it-terminal negattiv (-) tal-inverter mat-terminal negattiv (-) tal-bank tal-batterija.
• Install a properly rated DC fuse or circuit breaker (e.g., 300A for this 1000W model) as close to the battery positive terminal as possible.
• Ensure all connections are clean, tight, and secure.

Image showing the rear of the inverter charger with the large red (positive) and black (negative) battery terminals for DC input.

3. AC Wiring (Input and Output)

The inverter charger has both an AC input and AC output. The AC input is used for charging batteries and passing through AC power, while the AC output provides 120V AC power to your loads.

• Input AC: Connect a 120V AC source (shore power, generator) to the AC input socket.
• Output AC: Connect your AC appliances or distribution panel to the GFCI outlet on the front panel.
• Ensure all AC wiring adheres to local electrical codes and uses appropriate wire gauges.

Image showing the front of the inverter charger with the AC output socket (GFCI) and AC input socket.

4. L-ert

• Connect the grounding electrode terminal on the inverter charger to a reliable earth ground.
• For mobile applications (RV, boat), ensure proper chassis grounding.

5. Konnessjonijiet Fakultattivi

• Kontroll mill-bogħod: Connect an optional LCD or LED remote control unit to the respective ports for convenient monitoring and control.
• Sensor tat-temperatura tal-batterija: Connect the battery temperature sensor to the battery bank and the designated port on the inverter for optimized charging.
• Bidu Awtomatiku tal-Ġeneratur: Connect compatible generator control wiring to the Auto Gen Start terminal if using this feature.

Istruzzjonijiet Operattivi

1. L-Inizjali Tixgħel

• Kun żgur li l-konnessjonijiet kollha tal-wajers huma siguri u korretti.
• Turn on the DC circuit breaker or fuse connected to the battery bank.
• Flip the On/Off Power Switch on the inverter charger to the "ON" position.
• The unit will perform a self-test, and indicator lights will illuminate.

2. Inverter Mode (DC to AC Conversion)

• When no AC input is present, the inverter will draw power from the battery bank and convert it to 120V AC for connected loads.
• Immonitorja l-volum tal-batterijatage to prevent over-discharge. The inverter has a low voltage alarm and shutdown feature.

3. Charger Mode (AC to DC Charging)

• When a 120V AC source is connected to the AC input, the unit will automatically switch to charger mode.
• The integrated 35A smart charger will begin charging the connected battery bank.
• Adjust the Charge Current Control Dial to set the desired charging current.
• The unit will also pass through the incoming AC power to the AC output, powering connected loads directly from the AC source.

4. Transfer Switch Operation

• The auto transfer switch ensures a seamless transition between inverter power and incoming AC utility/generator power.
• When AC input is detected, the unit prioritizes the external AC source.
• When AC input is lost, the unit automatically switches back to inverter mode.

5. Dip Switch Settings

The dip switches on the rear panel allow for customization of various operational parameters, such as battery type, charge voltage settings, and power save mode. Refer to the detailed manual for specific configurations.

Manutenzjoni

Manutenzjoni regolari tiżgura l-lonġevità u l-prestazzjoni ottimali tal-ċarġer tal-inverter tiegħek.

• Tindif: Periodically clean the exterior of the unit with a dry cloth. Ensure vents and cooling fan are free from dust and debris. Do not use liquid cleaners.
• Konnessjonijiet: Annually inspect all electrical connections (DC and AC) for tightness and corrosion. Loose connections can cause overheating and poor performance.
• Manutenzjoni tal-batterija: Follow the battery manufacturer's recommendations for maintenance. Ensure batteries are properly charged and maintained to prolong their lifespan.
• Ventilazzjoni: Kun żgur li ż-żona tal-installazzjoni tibqa' ventilata sew u ħielsa minn ostakli.

Issolvi l-problemi

This section provides solutions to common issues. For problems not listed here, contact AIMS Power technical support.

Speċifikazzjonijiet

Garanzija u Appoġġ

AIMS Power has been in business for over 20 years, providing reliable power solutions. All technical assistance and warranty support are handled directly from their facility in Nevada, USA.

For technical inquiries, troubleshooting assistance, or warranty claims, please contact AIMS Power directly. Refer to the official AIMS Power website for the most current contact information and warranty policy details.

Note: Warranty terms and conditions may vary. Keep your proof of purchase for warranty service.