Sugatsune Lamp Manwal tal-Istruzzjonijiet tal-Ġbid HH-KL160

1. Introduzzjoni

This manual provides instructions for the proper installation, operation, and maintenance of the Sugatsune Lamp HH-KL160 Pulls. Please read this manual thoroughly before installation and retain it for future reference. This product is designed for use as a recessed pull handle for doors or drawers.

Image 1: The Sugatsune Lamp HH-KL160 Pull, a rectangular recessed handle made of satin-finished 304 stainless steel. The brand "LAMP" and material "SUS304" are subtly engraved on the surface.

2. Informazzjoni dwar is-Sigurtà

Osserva l-prekawzjonijiet ta' sigurtà li ġejjin biex tevita korriment jew ħsara lill-prodott:

• Kun żgur li l-komponenti kollha huma preżenti u mhux imħassra qabel l-installazzjoni.
• Uża għodda xierqa għall-installazzjoni.
• Do not apply excessive force during installation or operation.
• Żomm fejn ma jintlaħaqx mit-tfal.

3. Kontenut tal-Pakkett

Iċċekkja li l-oġġetti kollha huma inklużi fil-pakkett:

• 1x Sugatsune Lamp HH-KL160 Pull
• Mounting Screws (quantity as required for installation)

4. Speċifikazzjonijiet

5. Setup u Installazzjoni

This section outlines the general steps for installing the HH-KL160 Pull. Specific installation requirements may vary based on the application (e.g., door, drawer, cabinet).

5.1 Għodod Meħtieġa

• Tejp tal-kejl jew Ħakkiem
• Lapes jew Marker
• Drill
• Appropriate Drill Bits (for pilot holes and recess)
• Screwdriver (compatible with mounting screws)
• Chisel or Router (for recess, if applicable)

5.2 Passi ta' Installazzjoni

1. Iddetermina l-Pjazzament: Carefully select the desired location for the pull handle on your door or drawer. Mark the center points for the mounting screws and the outline for the recessed area.
2. Prepare Recess (if required): If the pull is to be flush-mounted, create a recess in the material according to the dimensions of the pull's body. Ensure the depth is sufficient for the pull to sit flush or slightly proud as desired.
3. Drill Pilota Toqob: Drill pilot holes for the mounting screws at the marked locations. Ensure the drill bit size is appropriate for the screws to prevent splitting the material.
4. Position the Pull: Place the HH-KL160 Pull into the prepared recess (if applicable) and align the screw holes with the pilot holes.
5. Secure the Pull: Insert the mounting screws and tighten them securely. Do not overtighten, as this can damage the pull or the mounting surface.
6. Operazzjoni tat-Test: Gently pull the handle to ensure it is firmly attached and operates smoothly.

6. Istruzzjonijiet Operattivi

The Sugatsune Lamp HH-KL160 Pull is a static handle designed for manual operation. To use, simply grasp the recessed area and apply gentle force to open or close the door or drawer it is attached to.

• Avoid using excessive force, which could damage the handle or the mounting surface.
• Do not use the handle for purposes other than its intended function (e.g., as a climbing aid).

7. Kura u Manutenzjoni

To ensure the longevity and appearance of your HH-KL160 Pull, follow these maintenance guidelines:

• Tindif: Imsaħ il-wiċċ regolarment b'ċarruta ratba u damp cloth. For stubborn marks, use a mild soap solution and then dry thoroughly. Avoid abrasive cleaners, harsh chemicals, or scouring pads, as these can damage the satin finish.
• Spezzjoni: Periodically check the mounting screws for tightness. If they become loose, gently retighten them.
• Prevenzjoni tal-Korrużjoni: While 304 stainless steel is highly resistant to corrosion, prolonged exposure to harsh environments (e.g., saltwater, strong acids) should be avoided.

8 Issolvi l-problemi

9. Garanzija u Appoġġ

For information regarding warranty coverage or technical support for your Sugatsune Lamp HH-KL160 Pull, please refer to the official Sugatsune America webis-sit jew ikkuntattja lis-servizz tal-konsumatur tagħhom direttament. Żomm l-irċevuta tax-xiri tiegħek bħala prova tax-xiri.

Manifattur: Sugatsune Amerika

Websit: www.sugatsune.com