1. Introduzzjoni
The Tekonsha 119178 Tail Light Converter is designed to adapt a vehicle's separate turn and stop light system (3-wire system) to a standard trailer's combined taillight wiring system (2-wire system). This unit ensures proper synchronization of vehicle and trailer lighting functions, including tail lights, stop lights, and turn signals. It is compatible with both LED and incandescent bulbs on the vehicle and trailer sides and features integrated circuit protection for enhanced safety.
Image of the Tekonsha 119178 Tail Light Converter, a compact black unit with wiring harnesses.
2. Informazzjoni dwar is-Sigurtà
- Always disconnect the vehicle's battery before beginning any electrical installation to prevent electrical shock or damage to the vehicle's electrical system.
- Kun żgur li l-konnessjonijiet tal-wajers kollha huma sikuri u iżolati sew biex tevita short circuits.
- Mount the converter in a dry, protected location away from excessive heat, moisture, and moving parts.
- Jekk m'intix ċert dwar xi parti tal-proċess tal-installazzjoni, ikkonsulta tekniku tal-karozzi kwalifikat.
- Do not exceed the specified circuit capacities of the converter.
3. Kontenut tal-Pakkett
Iċċekkja li l-komponenti kollha huma preżenti qabel tibda l-installazzjoni:
- Tekonsha 119178 Tail Light Converter Unit
- 60-inch Car Side 4-Flat Vehicle Connector with Cover
- Wiring Harness with 16 Gauge Bonded Wire
4. Karatteristiċi tal-prodott
- Universal Circuit Protected Design: Adapts 3-wire vehicle systems to 2-wire trailer systems.
- Kompatibbiltà Wiesgħa: Works with both LED and incandescent bulbs on the vehicle and trailer.
- Integrated Short Circuit Protection: Re-settable protection safeguards the tow vehicle from electrical shorts or incorrect wiring.
- Kapaċità Għolja: 2.1 amp stop light/turn signal circuit capacity; 7.5 amp taillight circuit capacity.
- Kostruzzjoni Durabbli: All solid-state components for reliable performance.
- Reach Estiża: Features a 60-inch long, car side 4-flat vehicle connector with cover and 16 gauge bonded wire.
5. Setup u Installazzjoni
Follow these steps for proper installation of the tail light converter:
- Preparazzjoni: Gather necessary tools (wire strippers, crimpers, electrical tape, circuit tester, mounting hardware). Disconnect the vehicle's negative battery terminal.
- Identify Vehicle Wires: Using a circuit tester, identify the following wires on your vehicle's taillight harness:
- Tail Light (running lights)
- Stop Light (brake lights)
- Sinjal Dawra Xellug
- Sinjal Dawra Lemin
- Art
- Connect Converter Input Wires: Splice the converter's input wires to the corresponding vehicle wires. Ensure secure connections using appropriate connectors or soldering, and insulate thoroughly with electrical tape or heat shrink tubing.
- Konvertitur Kannella Wire → Vehicle Dawl tad-Dnub Wajer
- Konvertitur Aħmar Wire → Vehicle Stop Light Wajer
- Konvertitur Isfar Wire → Vehicle Sinjal Dawra Xellug Wajer
- Konvertitur Aħdar Wire → Vehicle Sinjal Dawra Lemin Wajer
- Konvertitur Abjad Wire → Vehicle Art (ensure a good chassis ground connection)
- Mount Converter: Secure the converter unit in a dry, protected area of the vehicle, such as inside the trunk or under the rear bumper, using screws or zip ties. Ensure it is not exposed to direct water spray or excessive heat.
- Qabbad mat-Trejler: Route the converter's 4-flat output connector to the rear of the vehicle where it can easily connect to the trailer's 4-flat plug. Use the included cover to protect the connector when not in use.
- Sistema tat-Test: Reconnect the vehicle's battery. Connect a trailer or a trailer light tester to the 4-flat connector. Test all lighting functions: tail lights, brake lights, left turn signal, and right turn signal. Ensure all lights operate correctly and independently.
6. Istruzzjonijiet Operattivi
Once properly installed, the Tekonsha 119178 Tail Light Converter operates automatically. When the vehicle's lights are activated, the converter processes the signals and sends the correct output to the trailer's lighting system. No manual intervention is required during operation.
- Before each towing trip, ensure the 4-flat connector is securely plugged into the trailer and that all trailer lights are functioning correctly.
- The converter is designed to work with both LED and incandescent bulbs on both the vehicle and trailer, providing flexibility for various setups.
7. Manutenzjoni
Minimal maintenance is required for the Tekonsha 119178 Tail Light Converter:
- Spezzjoni regolari: Periodically inspect all wiring and connections for signs of wear, corrosion, or damage. Repair or replace any compromised components immediately.
- Konnessjonijiet Nadif: Keep the 4-flat connector pins clean and free of dirt or debris. Use dielectric grease on the pins to prevent corrosion, especially in harsh environments.
- Immuntar Sikur: Ensure the converter unit remains securely mounted in its designated location.
8 Issolvi l-problemi
If you encounter issues with your tail light converter, refer to the following troubleshooting guide:
| Problema | Kawża Possibbli | Soluzzjoni |
|---|---|---|
| No trailer lights functioning. | Loose or corroded connections; blown vehicle fuse; faulty trailer wiring. | Check all connections, vehicle fuses, and trailer wiring. Ensure a good ground connection. |
| Trailer lights not functioning correctly (e.g., brake lights activate with turn signal). | Incorrect wiring connections to the vehicle. | Re-verify all input wire connections to the vehicle's tail, stop, and turn signal wires. |
| Converter stops working intermittently or after a short circuit. | Integrated short circuit protection activated. | Disconnect the trailer. Inspect trailer wiring for shorts. The converter's protection is re-settable and should resume normal operation once the fault is cleared. |
| One specific trailer light not working. | Faulty trailer bulb; issue with trailer's internal wiring; specific output wire from converter is loose. | Check the trailer bulb. Inspect the trailer's wiring. Verify the corresponding output wire from the converter to the 4-flat connector. |
9. Speċifikazzjonijiet
- Mudell: 119178
- Ditta: Tekonsha
- Stop Light/Turn Signal Circuit Capacity: 2.1 Amps per circuit
- Taillight Circuit Capacity: 7.5 Amps
- Voltage: 12 Volts
- Wattage: 26.2 Watts
- Dimensjonijiet tal-Prodott: 22.56 x 10.11 x 4.78 ċm (8.88 x 3.98 x 1.88 pulzieri)
- Piż tal-oġġett: 181 g (0.4 lbs)
- Gauge tal-wajer: 16 gauge bonded wire
- Tip ta' Konnettur: 4-flat vehicle connector with cover
- Protezzjoni: Integrated re-settable short circuit protection
- Kompatibbiltà tal-bozoz: LED and/or Incandescent (vehicle and trailer)
10. Garanzija u Appoġġ
The Tekonsha 119178 Tail Light Converter is backed by Tekonsha's Garanzija Limitata ta' Sena. Din il-garanzija tkopri difetti fil-materjali u l-abbilità taħt użu normali.
For warranty claims, technical assistance, or further support, please contact Tekonsha customer service through their official website or the retailer where the product was purchased. Please have your product model number and purchase information available when contacting support.
