Manwal tal-Utent tal-Ansmann Agent 1 Focus LED Flashlight

Introduzzjoni

Thank you for choosing the Ansmann Agent 1 Focus LED Flashlight. This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your device. Please read it thoroughly before use and retain it for future reference.

The Ansmann Agent 1 Focus is a high-performance LED flashlight featuring a 3W CREE LED, designed for strong, consistent illumination. Its robust aircraft-grade aluminum housing ensures durability and resistance to splashes (IP54) and impacts, making it suitable for various environments.

Istruzzjonijiet tas-Sigurtà

• Do not look directly into the LED beam. Id-dawl intens jista' jikkawża indeboliment temporanju fil-vista jew ħsara lill-għajnejn.
• Żomm il-flashlight fejn ma jintlaħaqx mit-tfal.
• Do not attempt to disassemble or modify the flashlight. This may void the warranty and pose safety risks.
• Kun żgur li l-batteriji jiddaħħlu bil-polarità korretta. Daħħal ħażin jista' jagħmel ħsara lill-apparat jew jikkawża tnixxija tal-batterija.
• Remove batteries if the flashlight will not be used for an extended period to prevent leakage and damage.
• Armi l-batteriji użati skont ir-regolamenti lokali. Tarmix il-batteriji.
• Evita li tesponi l-flashlight għal temperaturi estremi jew dawl tax-xemx dirett għal perjodi twal.

Kontenut tal-Pakkett

Ivverifika li l-oġġetti kollha huma preżenti fil-pakkett:

• Ansmann Agent 1 Focus LED Flashlight
• 2 x Batteriji AAA (installati minn qabel jew inklużi separatament)
• Clip taċ-ċinturin
• Ċinga tal-Idejn
• Manwal għall-Utent (dan id-dokument)

Setup

Installazzjoni tal-batterija

1. Ħoll l-għatu tad-denb tat-torċa billi ddawwru kontra l-arloġġ.
2. Insert two AAA batteries into the battery compartment, ensuring the positive (+) and negative (-) terminals align with the markings inside the flashlight.
3. Invita l-għatu tad-denb lura lejn l-arloġġ sakemm ikun issikkat sew. Tissikkax iżżejjed.

Istruzzjonijiet Operattivi

Qawwa mixgħul/mitfi

To turn the flashlight on or off, firmly press the tactical switch located on the tail cap. A full press will toggle the power.

Aġġustament Focus

The Ansmann Agent 1 Focus features a smooth, one-handed focus adjustment mechanism. To adjust the beam from a wide floodlight to a narrow spotlight, simply slide the head of the flashlight forward or backward. This allows for precise control over the light distribution.

Morse Function

With the flashlight turned on, a half-press of the tactical switch will momentarily activate the light. This allows for signaling using Morse code or for quick, temporary illumination.

Manutenzjoni

Tindif

• Imsaħ il-barra tal-flashlight b'ċarruta ratba uamp drapp. Tużax tindif jew solventi li joborxu.
• Żomm il-lenti nadifa għal output tad-dawl ottimali. Uża drapp għat-tindif tal-lentijiet jekk meħtieġ.

Sostituzzjoni tal-batterija

When the light output diminishes, replace both AAA batteries following the installation steps outlined in the "Battery Installation" section. Always replace both batteries simultaneously with new ones of the same type.

Issolvi l-problemi

Speċifikazzjonijiet

Garanzija u Appoġġ

Ansmann products are manufactured with quality and reliability in mind. For information regarding warranty coverage, technical support, or service, please refer to the official Ansmann webis-sit jew ikkuntattja lid-dipartiment tas-servizz tal-konsumatur tagħhom. Żomm l-irċevuta tax-xiri tiegħek bħala prova tax-xiri.

Klijent mill-ġdidview mentions a 5-year warranty. Please verify the exact warranty terms with the manufacturer or your retailer at the time of purchase.

Għal aktar għajnuna, tista' żżur il- Ansmann Store on Amazon.