Casio G-Shock AWG-M100A-1ACR Tough Solar Watch Instruction Manual

Introduzzjoni

This manual provides detailed instructions for the operation and maintenance of your Casio G-Shock AWG-M100A-1ACR Tough Solar Watch. Please read this manual thoroughly to ensure proper use and to fully utilize all features of your watch.

Immaġni: Quddiem view of the Casio G-Shock AWG-M100A-1ACR watch, showcasing its black resin band, case, and dial with blue accents and digital displays.

Setup

1. Iċċarġjar Inizjali (Tough Solar)

Your watch is equipped with Tough Solar power, which converts light into electrical energy. Before initial use, expose the watch face to bright light (sunlight or fluorescent light) for several hours to ensure a full charge. The watch will continue to charge when exposed to light during normal wear.

• Avoid blocking the watch face from light exposure.
• A fully charged battery can last approximately 6 months without further light exposure under normal use, or longer in power-saving mode.

2. Time Calibration (Multi-Band Atomic Timekeeping)

The watch features Multi-Band Atomic Timekeeping, receiving time calibration radio signals for accurate time. This function automatically receives signals up to six times a day (five times for China). Manual reception is also possible.

• Signal Reception Areas: US (WWVB), UK (MSF), Germany (DCF77), Japan (JJY40/JJY60), China (BPC).
• Ensure the watch is placed in an area with good signal reception, typically near a window, away from electronic devices that may cause interference.
• For manual reception, refer to the "Time Calibration" section in the operating instructions.

3. Initial Settings: Home City and Daylight Saving Time (DST)

Before using the watch, configure your Home City and Daylight Saving Time (DST) settings. These settings are crucial for correct time display and atomic time signal reception.

1. Daħħal il-Modalità taż-żamma tal-ħin.
2. Press and hold the ADJUST button until the city code starts to flash.
3. Use the FORWARD and REVERSE buttons to select your desired Home City code.
4. Press the MODE button to cycle through other settings like DST.
5. Use the FORWARD or REVERSE buttons to toggle DST ON or OFF as required for your region.
6. Press the ADJUST button to exit the settings.

Istruzzjonijiet Operattivi

The Casio G-Shock AWG-M100A-1ACR features multiple modes and functions accessible via its four buttons.

Funzjonijiet Button Overview

1. Modalità taż-Żamma tal-Ħin

This is the default mode, displaying the current time, day, and date. The analog hands show the current time, while the digital displays provide additional information.

• Formati ta' 12/24 Siegħa: Can be toggled in settings.
• Kalendarju Awtomatiku Sħiħ: Ipprogrammat minn qabel sas-sena 2099.

2. Modalità tal-Ħin Dinji

Jippermettilek view the current time in 31 time zones (48 cities + UTC). Press the MODE button to navigate to this mode.

• Use the FORWARD and REVERSE buttons to scroll through city codes.

3. Mod ta 'Allarm

L-arloġġ għandu 5 allarmi ta’ kuljum u arloġġ ta’ twissija.urly sinjal tal-ħin.

• Press the MODE button to navigate to the Alarm Mode.
• Use the FORWARD/REVERSE buttons to select an alarm (AL1-AL5) or the Hourly Sinjal tal-Ħin (SIG).
• Press the ADJUST button to toggle an alarm ON/OFF or to enter alarm setting mode.

4. Modalità tal-Istopwatch

Measures elapsed time with 1/100-second accuracy.

• Press the MODE button to navigate to the Stopwatch Mode.
• Use the FORWARD button to start/stop the stopwatch.
• Use the REVERSE button to reset the stopwatch.
• Measuring capacity: 59'59.99".

5. Modalità tat-Tajmer tal-Countdown

Functions as a countdown timer with a range of 1 minute to 100 minutes.

• Press the MODE button to navigate to the Countdown Timer Mode.
• Press the ADJUST button to set the countdown time.
• Use the FORWARD/REVERSE buttons to adjust the time.
• Press the FORWARD button to start/stop the countdown.

6. Hand Adjustment Feature

This unique feature allows you to temporarily move the analog hands out of the way to provide an unobstructed view of the digital displays, which is useful when using the stopwatch or countdown timer.

• To activate: While in any mode, press and hold both the FORWARD and REVERSE buttons simultaneously for a few seconds. The hands will move to a position that does not obstruct the digital displays.
• To deactivate: Press any button, and the hands will return to the current time.

7. Tħaddim tad-Dawl LED

The watch features a Full Auto LED Light with Afterglow for illumination in low-light conditions.

• Press the FORWARD button to activate the LED light.
• The light duration can be set to 1.5 seconds or 3 seconds in the watch settings.
• The "Full Auto LED Light" feature means the light will automatically illuminate when you tilt your wrist towards your face in dark conditions, provided the auto-light function is enabled in settings.

Image: The Casio G-Shock AWG-M100A-1ACR watch worn on a wrist, illustrating its proportional size and fit.

Manutenzjoni

1. Water Resistance (200M)

Your G-Shock watch is water-resistant to 200 meters (20 ATM), making it suitable for swimming, showering, and snorkeling. Do not operate buttons while the watch is submerged in water.

• Avoid exposing the watch to hot water or steam, as this can damage seals.
• Laħlaħ l-arloġġ b'ilma ħelu wara espożizzjoni għall-ilma mielaħ.

2. Tindif

Naddaf l-arloġġ tiegħek regolarment biex iżżomm id-dehra u l-funzjonalità tiegħu.

• Wipe the case and band with a soft, dry cloth.
• For stubborn dirt, use a soft brush and mild soap solution, then rinse thoroughly with fresh water and dry.
• Avoid using chemical cleaners or solvents.

3. Battery and Power Saving

The watch uses a solar rechargeable battery. Ensure regular exposure to light to maintain optimal charge levels.

• Indikatur tal-Enerġija tal-batterija: Check the digital display for the current charge level.
• Funzjoni ta' Iffrankar tal-Enerġija: When enabled, the watch will automatically enter a power-saving state (blank display) when left in the dark for a certain period, conserving battery life. The timekeeping continues internally.

4. Reżistenza għax-Xokkijiet

G-Shock watches are designed for high shock resistance. While durable, avoid unnecessary impacts to prolong the watch's lifespan.

Issolvi l-problemi

• Kwistjonijiet ta' Sinkronizzazzjoni tal-Ħin: If the watch fails to receive the atomic time signal, ensure it is placed in an open area, away from electronic interference, especially overnight. Manual reception can be attempted. Verify your Home City setting is correct.
• Digital Display Visibility: The negative digital displays (light digits on a dark background) can be challenging to read in low light. Use the LED light for better visibility. This is a characteristic of the display type.
• Idejn Analogi Li Ma Jaqblux mal-Ħin Diġitali: If the analog hands are misaligned with the digital time, perform a hand home position correction. Refer to the detailed manual (Module 5230) for specific steps on hand alignment.
• Batterija Mhux Iċċarġja: Ensure the watch face is exposed to sufficient light. If the battery indicator remains low despite exposure, contact customer support.

Speċifikazzjonijiet

• Numru tal-Mudell: AWG-M100A-1ACR
• Modulu: 5230
• Ditta: Casio G-Shock
• Materjal: Reżina (Kaxxa u Ċinga)
• Dimensjonijiet: 2.05 x 0.59 x 1.83 pulzieri
• Piż: 2 uqija
• Sors tal-Enerġija: Tough Solar (Solar Rechargeable Battery)
• Żmien tal-ħin: Multi-Band Atomic Timekeeping (US, UK, Germany, Japan, China)
• Reżistenza għall-Ilma: 200M (20 ATM)
• Reżistenza għax-xokk: Iva
• Dawl: Full Auto LED Light with Afterglow
• Ħin Dinji: 31 żona tal-ħin (48 belt + UTC)
• Allarmi: 5 Allarmi ta' Kuljum, Hourly Sinjal tal-Ħin
• Kronometru: 1/100 second, Measuring capacity: 59'59.99"
• Timer tal-Countdown: Measuring unit: 1 second, Countdown range: 1 minute to 100 minutes
• Kalendarju: Full Auto Calendar (pre-programmed until 2099)
• Formati tal-ħin: 12/24 Hour Formats
• Eżattezza: +/-15 seconds per month (without signal calibration)

Garanzija u Appoġġ

L-arloġġ Casio G-Shock tiegħek huwa kopert minn garanzija tal-manifattur. Jekk jogħġbok irreferi għall-karta tal-garanzija inkluża max-xiri tiegħek għal termini u kundizzjonijiet speċifiċi, inkluż it-tul tal-garanzija u d-dettalji tal-kopertura.

For technical support, service, or warranty claims, please contact Casio customer service. Contact information can typically be found on the official Casio webis-sit jew fid-dokumentazzjoni pprovduta mal-arloġġ tiegħek.

Riżorsi onlajn: For the most up-to-date information and detailed module instructions (Module 5230), visit the official Casio G-Shock support websit.