Manwal tal-Utent tal-Multimetru Diġitali tal-Bank Keithley 2000

1. Introduzzjoni

The Keithley Model 2000 is a 6½-digit bench digital multimeter designed for high-performance measurement applications. It utilizes advanced A/D converter technology to provide fast, accurate, and stable measurements. This manual provides essential information for the safe and effective operation of your Keithley 2000 multimeter.

2. Informazzjoni dwar is-Sigurtà

TWISSIJA:

• Always connect the protective earth terminal of the instrument to the protective earth of the AC power supply through the supplied power cord.
• Do not operate the instrument in an explosive atmosphere or in the presence of flammable gases or fumes.
• Ensure all connections are secure before applying power or making measurements.
• Observe all terminal ratings and maximum input voltages specified on the instrument.
• Refer all servicing to qualified personnel. There are no internal operator serviceable parts.

3. Prodott Aktarview

3.1 Panel ta 'Quddiem

The front panel of the Keithley 2000 features the display, function buttons, input terminals, and power switch.

Immaġni: Quddiem view of the Keithley 2000 Digital Bench Multimeter, showing the display, control buttons, and input terminals.

• Wiri: Shows measurement readings and instrument status.
• Buttuni tal-Funzjoni: Select measurement types (DCV, ACV, DCI, ACI, Ω, Freq, Temp, etc.).
• Terminali tal-Input: Red (HI) and Black (LO) terminals for voltage and resistance measurements, and dedicated terminals for current measurements.
• Swiċċ tal-Enerġija: Jixgħel jew jitfi l-istrument.

3.2 Panel ta 'wara

The rear panel provides connections for power, communication interfaces, and fuse access.

Immaġni: Wara view of the Keithley 2000 Digital Bench Multimeter, showing power input, GPIB, RS-232, and trigger link ports.

• Input tal-Enerġija AC: Għall-konnessjoni tal-korda tal-enerġija.
• GPIB/RS-232 Ports: For remote control and data transfer.
• Trigger Link: For synchronizing with other instruments.
• Detentur tal-fjus: Contains the main power fuse.

3.3 Optional Scanner Cards

The Model 2000 supports optional scanner cards for multiplexing up to 20 different input signals, enabling multipoint measurement applications.

Image: An optional scanner card, which can be installed in the Keithley 2000 to expand its input capabilities for multipoint measurements.

4. Setup

4.1 Konnessjoni tal-Enerġija

1. Ensure the power switch on the front panel is in the OFF position.
2. Connect the supplied AC power cord to the power input receptacle on the rear panel.
3. Ipplaggja t-tarf l-ieħor tal-korda tal-enerġija f'sokit tal-enerġija AC ertjat.

4.2 Qawwa Inizjali

1. Press the power switch on the front panel to the ON position.
2. The instrument will perform a self-test and display its firmware version.
3. Once the self-test is complete, the multimeter will be ready for operation.

5. Istruzzjonijiet Operattivi

The Keithley 2000 offers 13 built-in measurement functions. This section covers basic operation for common measurements.

Immaġni: Angolata view of the Keithley 2000 Digital Bench Multimeter, highlighting the clear digital display showing a measurement.

5.1 DC Voltage Kejl (DCV)

1. Agħfas il- DCV buttuna tal-funzjoni.
2. Qabbad it-test twassal mal- HI (aħmar) u LO (black) input terminals on the front panel.
3. Connect the test leads across the component or circuit to be measured.
4. Id-DC voltage reading will appear on the display.

5.2 Kejl tar-Reżistenza (Ω)

1. Agħfas il- Ω buttuna tal-funzjoni.
2. Qabbad it-test twassal mal- HI (aħmar) u LO (black) input terminals.
3. Ensure the circuit or component is de-energized before connecting the leads.
4. Connect the test leads across the resistor or circuit to be measured.
5. The resistance reading will appear on the display.

5.3 Current Measurement (DCI/ACI)

1. Agħfas il- DCI or ACI function button depending on the current type.
2. Connect the test leads to the dedicated 3A, 250V AMPS input terminals on the front panel.
3. Ensure the circuit is de-energized before connecting the leads.
4. Connect the multimeter in series with the circuit where current is to be measured.
5. Apply power to the circuit. The current reading will appear on the display.

For other functions like AC Voltage (ACV), Frequency (FREQ), Temperature (TEMP), and advanced settings, refer to the detailed programming manual available on the Keithley websit.

6. Manutenzjoni

6.1 Tindif

Biex tnaddaf l-istrument, uża drapp artabampened with a mild detergent solution. Do not use abrasive cleaners or solvents. Ensure the instrument is powered off and disconnected from all power sources before cleaning.

6.2 Sostituzzjoni tal-Fjus

If the instrument does not power on, the fuse may need replacement. The fuse holder is located on the rear panel. Always replace the fuse with one of the same type and rating as specified on the instrument (e.g., 250mA T, 100/120 VAC or 125mA T, 220/240 VAC).

1. Skonnettja l-korda tad-dawl mill-istrument.
2. Open the fuse holder cover.
3. Remove the old fuse and insert a new fuse of the correct rating.
4. Close the fuse holder cover securely.

7 Issolvi l-problemi

8. Speċifikazzjonijiet

9. Garanzija u Appoġġ

For warranty information and technical support, please refer to the documentation included with your product or visit the official Keithley website. Keithley provides comprehensive resources, including detailed manuals, software downloads, and contact information for customer service and technical assistance.

Tipikament tista' ssib riżorsi ta' appoġġ fuq www.tek.com/keithley.