Manwal tal-Istruzzjonijiet tas-Sett tat-Trimmer tax-Xagħar/Kura tal-Ġisem AEG BHT 5640

1. Introduzzjoni

Thank you for choosing the AEG BHT 5640 Body Care/Hair Trimmer Set. This versatile 4-in-1 grooming kit is designed for precise and gentle hair removal across various body areas. Please read this instruction manual carefully before first use to ensure safe operation and optimal performance of your device. Keep this manual for future reference.

2. Istruzzjonijiet tas-Sigurtà

• Dan l-apparat jista' jintuża minn tfal minn 8 snin 'il fuq u persuni b'kapaċitajiet fiżiċi, sensorji jew mentali mnaqqsa jew b'nuqqas ta' esperjenza u għarfien jekk ikunu ngħataw superviżjoni jew struzzjoni dwar l-użu tal-apparat b'mod sikur u jifhmu l-perikli involuti .
• It-tfal m'għandhomx jilagħbu bl-apparat. It-tindif u l-manutenzjoni tal-utent m'għandhomx isiru minn tfal mingħajr superviżjoni.
• Do not immerse the appliance in water or other liquids. The housing is beam-water-protected (IPX5), but the charging base is not.
• Only use the original charging adapter provided with the device.
• Tużax l-apparat jekk ikun bil-ħsara jew ma jaħdimx ħażin.
• Żomm l-apparat 'il bogħod minn sorsi ta' sħana u dawl tax-xemx dirett.
• Ensure hands are dry when handling the appliance and charger.
• For hygienic reasons, avoid sharing the appliance with others.
• Always switch off the appliance before changing attachments or cleaning.

3. Prodott Aktarview

The AEG BHT 5640 is a versatile grooming tool featuring a main trimmer unit and four interchangeable attachment heads, along with a charging/storage stand and accessories.

Komponenti Ewlenin:

• Unità Prinċipali tat-Trimmer
• Hair Cutting Attachment (32 mm width) with adjustable comb (11-20 mm in 10 stages)
• Beard Cutting Attachment (21 mm width) with adjustable comb (2.5-4.5 mm in 5 stages)
• Shaver Attachment (22 mm width)
• Nose/Ear Hair Remover Attachment
• Charging/Storage Stand
• Pinzell tat-tindif
• Moxt

Figura 1: The AEG BHT 5640 main trimmer unit with various attachments displayed on its charging and storage stand.

Figura 2: All components of the AEG BHT 5640 set, including the main unit, four attachment heads, adjustable combs, cleaning brush, and comb.

4. Setup

1. Ħlas Inizjali: Before first use, fully charge the trimmer for approximately 8-10 hours. Place the main trimmer unit into the charging stand and connect the power adapter to a suitable electrical outlet. The charging indicator light will illuminate.
2. Twaħħil tar-Rasijiet: To attach an accessory head, align the head with the main trimmer unit and gently push until it clicks into place. To remove, pull the head straight off.
3. Twaħħil tal-Moxtijiet: For the hair cutting and beard cutting attachments, slide the desired adjustable comb onto the attachment head until it locks. Adjust the cutting length by sliding the comb adjuster.

5. Istruzzjonijiet Operattivi

Ensure your skin and hair are clean and dry before use for best results, unless using the shaver attachment which can be used on wet skin.

Operazzjoni Ġenerali:

• Press the ON/OFF button to start the trimmer.
• Hold the trimmer at a slight angle against the skin.
• Mexxi t-trimmer bil-mod u b'mod kostanti kontra d-direzzjoni tat-tkabbir tax-xagħar.
• Press the ON/OFF button again to turn off the trimmer.

Uża l-Annessi:

1. Hair Cutting Attachment: Attach the hair cutting head and the desired adjustable comb. Select the desired cutting length (11-20 mm). Guide the trimmer against the hair growth.
2. Beard Cutting Attachment: Attach the beard cutting head and the desired adjustable comb. Select the desired cutting length (2.5-4.5 mm). Trim your beard by moving the trimmer in smooth strokes.
3. Shaver Attachment: Attach the shaver head. Use on dry or wet skin. Gently press the shaver against the skin and move in short, circular motions for a close shave.
4. Nose/Ear Hair Remover: Attach the nose/ear hair remover head. Carefully insert the trimmer tip into the nostril or ear canal. Move it gently to trim unwanted hair. Do not insert too deeply.

6. Manutenzjoni

Tindif regolari jiżgura prestazzjoni ottimali u jestendi l-ħajja tat-trimmer tiegħek.

Tindif:

• Wara Kull Użu: Switch off the trimmer. Remove the attachment head. Use the provided cleaning brush to remove any loose hairs from the blades and the trimmer unit.
• Tlaħliħ: The main trimmer unit and attachment heads are beam-water-protected (IPX5). They can be rinsed under running water. Ensure the trimmer is switched off and disconnected from the charger before rinsing. Allow all parts to air dry completely before reassembling or storing.
• Do NOT rinse the charging stand or power adapter.

Figura 3: The AEG BHT 5640 trimmer head being rinsed under running water, demonstrating its IPX5 water protection.

Ħażna:

Store the trimmer and its accessories in the charging/storage stand in a dry place, away from direct sunlight and out of reach of children.

7 Issolvi l-problemi

8. Speċifikazzjonijiet

• Ditta: AEG
• Mudell: BHT 5640
• Numru tal-Mudell tal-Oġġett: BHT 5640
• Dimensjonijiet tal-Prodott: 4 x 16.9 x 4 ċm
• Piż tal-oġġett: 20 g (0.02 Kilogrammi)
• Sors tal-Enerġija: Battery operated (Batteries required: Yes)
• Protezzjoni tal-Ilma: IPX5 (Beam-Water-Protected Housing)
• Hair Cutting Width: 32 mm
• Hair Cutting Lengths: 11 - 20 mm (10 stages)
• Beard Cutting Width: 21 mm
• Beard Cutting Lengths: 2.5 - 4.5 mm (5 stages)
• Shaver Width: 22 mm
• UPC: 795545111297
• Data L-Ewwel Disponibbli: 18 ta’ Diċembru 2013

9. Garanzija u Appoġġ

For warranty information or technical support, please refer to the warranty card included with your product or contact AEG customer service. Keep your proof of purchase for any warranty claims.

Manifattur: AEG