1. Introduzzjoni
The Peak Design Capture Camera Clip is a robust and versatile camera carrying system designed to securely hold your camera to any strap or belt, providing instant access for photography. It is engineered for durability and ease of use, allowing you to carry your camera comfortably during various activities while keeping it readily available.
Figure 1: The Peak Design Capture Camera Clip, showcasing its main components including the clip body and the quick-release plate.
2. Kontenut tal-Pakkett
- Capture Clip Body
- Standard Plate (compatible with Arca-type tripods)
- 2 x Thumbscrews for strap attachment
- 1 x Hex Wrench (for tightening the plate to the camera)
3. Setup u Installazzjoni
3.1 Attaching the Plate to Your Camera
- Locate the tripod mount thread on the bottom of your camera.
- Align the Capture Plate with the tripod mount.
- Use the provided hex wrench (or a coin) to securely tighten the screw on the plate into your camera's tripod mount. Ensure it is very tight to prevent rotation.
Figure 2: The quick-release plate, which attaches to the camera's tripod mount.
Figure 3: A camera with the quick-release plate attached, shown mounted on a belt, illustrating the plate's position on the camera body.
3.2 Attaching the Clip to a Strap or Belt
- Unscrew the two thumbscrews on the Capture Clip until the back plate detaches.
- Position the main body of the Capture Clip on the front of your backpack strap, belt, or bag strap.
- Place the back plate on the other side of the strap, aligning the screw holes.
- Re-insert and tighten the thumbscrews. Ensure the strap is firmly clamped between the two plates.
- For thinner straps, the screws can be adjusted to provide a tighter grip. For thicker straps, ensure the clip can accommodate the thickness (up to 0.5 inches / 1.3 cm).
Figure 4: The Capture Clip securely fastened to a backpack strap, demonstrating its low-profile sekwestru.
Figure 5: Two Capture Clips shown on a backpack, one on the shoulder strap and one on the waist strap, illustrating flexible mounting options.
Figure 6: A camera attached to a Capture Clip on a user's belt, showing how the system keeps the camera accessible at the hip.
3.3 Video Guide: Attachment and Usage Overview
Video 1: This video provides a detailed review and demonstration of the Peak Design Capture Clip, including how to attach it to a backpack strap, how the camera plate connects to the camera, and the process of securing and releasing the camera from the clip. It also discusses compatibility with different strap thicknesses and camera sizes.
4. Istruzzjonijiet Operattivi
4.1 Inserting Your Camera
With the Capture Clip securely attached to your strap or belt, slide your camera (with the plate attached) into the clip. You will hear a distinct "click" when the camera is fully engaged and locked into place. Gently tug on the camera to ensure it is secure before letting go.
Figure 7: The Capture Clip with the quick-release plate fully inserted, indicating a secure connection.
4.2 Rilaxxasing Your Camera
To release your camera, press the red quick-release button located on the side of the Capture Clip. While holding the button, slide the camera upwards and out of the clip. Practice this motion to become proficient for quick access.
Figura 8: Naħa A view of the Capture Clip, highlighting the red quick-release button used to detach the camera.
Nota: The Capture Clip features a quick-release lock designed to withstand over 200 lbs of force, ensuring your camera remains secure during active use. It also allows for fast and easy lens changes while the camera is mounted.
5. Manutenzjoni
- Regularly inspect the Capture Clip and camera plate for any signs of wear or damage.
- Ensure all screws are tightened securely before each use.
- Clean the clip and plate with a damp drapp kif meħtieġ. Evita kimiċi ħarxa.
- Store the clip in a dry, clean environment when not in use.
6 Issolvi l-problemi
6.1 Camera feels loose in the clip:
- Ensure the camera plate is fully inserted until it clicks.
- Verify the plate is tightly secured to your camera body using the hex wrench.
- Check that the Capture Clip itself is tightly clamped to your strap or belt.
6.2 Difficulty attaching the clip to a thick strap:
- The Capture Clip is designed for straps up to 3 inches (7.6 cm) wide and 0.5 inches (1.3 cm) thick. If your strap exceeds these dimensions, the clip may not fit properly.
- Ensure the thumbscrews are fully unscrewed to allow maximum opening for the strap.
7. Speċifikazzjonijiet
| Karatteristika | Dettall |
|---|---|
| Piż tal-oġġett | 5.1 uqija |
| Dimensjonijiet tal-oġġett (LxWxH) | 4.1 x 1.1 x 2.05 pulzieri |
| Materjal | Aluminju, Najlon |
| Apparati Kompatibbli | DSLR, compact, and point-and-shoot cameras |
| Strap/Belt Compatibility | Up to 3 inches (7.6 cm) wide and 0.5 inches (1.3 cm) thick |
| Quick-release Lock Strength | Withstands over 200 lbs of force |
8. Garanzija u Appoġġ
8.1 Informazzjoni dwar Garanzija
The Peak Design Capture Camera Clip comes with a 12-month warranty from the date of purchase. This warranty covers manufacturing defects and material flaws under normal use. Please retain your proof of purchase for warranty claims.
8.2 Appoġġ għall-Klijent
For further assistance, technical support, or warranty inquiries, please visit the official Peak Design webis-sit jew ikkuntattja lid-dipartiment tas-servizz tal-konsumatur tagħhom. L-informazzjoni ta' kuntatt tipikament tista' tinstab fuq l-imballaġġ tal-prodott jew fuq il-manuskritt tal-manifattur. websit.
