Rev-A-Shelf 14-Inch Tip-Out Plastic Sink Trays (Model 6572-14-11-52) Instruction Manual

1. Prodott Aktarview

The Rev-A-Shelf 14-inch Tip-Out Plastic Sink Trays are designed to maximize storage efficiency in kitchen, laundry room, or vanity base cabinets. These trays utilize the often-unused space behind false drawer fronts, providing convenient access to small items.

The set includes two durable injection-molded polymer trays: one conventional open tray and one accessory tray featuring a ring holder and soap dish. Self-holding hinges and mounting hardware are provided for installation.

2. Komponenti Inklużi

1 x White Open Tray (14"W x 2.13"D x 3.81"H)
1 x White Accessory Tray with Ring Holder and Soap Dish (14"W x 2.13"D x 3.81"H)
2 x Pairs of Self-Holding Hinges
Ħardwer tal-Immuntar

Two white plastic tip-out sink trays and four metal hinges

Image 2.1: Contents of the Rev-A-Shelf 14-inch Tip-Out Sink Tray package, showing both trays and hinges.

3. Speċifikazzjonijiet

Brand	Rev-A-Shelf
Numru tal-Mudell	6572-14-11-52
Kulur	Abjad
Materjal	Polimeru
Dimensjonijiet tal-Prodott (W x D x H)	14" x 2.13" x 3.81"
Piż tal-oġġett	1.05 liri
Safe għall-ħasil tal-platti	Iva
Assemblea Meħtieġa	Iva

Technical drawing showing dimensions of the tip-out tray and hinge

Image 3.1: Detailed dimensions of the tip-out tray and its corresponding hinge mechanism.

4. Istruzzjonijiet ta 'installazzjoni

Installation of the Rev-A-Shelf Tip-Out Trays requires basic tools and can typically be completed within 30 minutes. It is recommended to install these trays before a sink is set, if possible, for easier access.

4.1 Għodod Meħtieġa

Power Drill
Lapes
Tornavit
Tape Measure

4.2 Konsiderazzjonijiet ta' qabel l-Installazzjoni

Ensure a minimum of 2-1/4 inches of clearance between the backside of the cabinet door and the front of the sink basin.
The cabinet opening width should be 16-1/4 inches or larger for the 14-inch trays.
Measure your cabinet space carefully, checking for any obstructions like plumbing or existing door hinges.

Diagram illustrating how to measure cabinet space for framed and frameless cabinets

Image 4.1: Guide for measuring cabinet openings, showing considerations for both framed and frameless cabinet styles.

4.3 Installazzjoni Pass Pass

Prepare Hinges: Use the provided template or measure to position the hinges correctly. Pre-drill all screw holes for the hinges on the cabinet frame. Insert and remove screws once to ensure smooth installation later. Ensure hinges are not flush with the drawer opening to avoid a gap at the top.
Mark Cabinet Door: Hold the cabinet door in place and mark the hinge attachment points from inside the cabinet using a pencil. Alternatively, measure precisely.
Pre-drill Door Holes: Pre-drill holes on the cabinet door at the marked locations. Be careful not to drill through the door.
Attach Hinges to Door: Screw the hinges onto the cabinet door.
Position Trays: Determine the optimal position for the trays inside the cabinet. A common recommendation is to position the top of the tray approximately 1/8 inch below the top edge of the cabinet opening to prevent interference. Mark the screw locations for the trays.
Mount Trays: Pre-drill holes for the trays and secure them with screws. Do not overtighten, allowing for slight movement for cleaning.
Assemblea Finali: With the hinges extended (in the open position), attach the cabinet door with the trays to the cabinet frame using the pre-drilled hinge holes. Tighten all screws securely.

Two white tip-out trays installed under a kitchen sink, one holding a blue brush

Immaġni 4.2: Eż.ample of installed tip-out trays in a kitchen cabinet, showing one tray holding a cleaning brush.

Two white tip-out trays installed under a kitchen sink, one holding a sponge and soap dish

Immaġni 4.3: Oħra view of installed tip-out trays, with the accessory tray holding a sponge and a small soap dish.

Overhead view of two white tip-out trays installed under a kitchen sink, holding various cleaning items

Image 4.4: Overhead perspective of the tip-out trays in use, demonstrating their capacity for sink-side accessories.

Two white tip-out trays installed in dark kitchen cabinets, holding a green scrubber and a blue sponge

Image 4.5: Tip-out trays installed in dark-colored kitchen cabinets, showcasing their versatility with different cabinet finishes.

5. Istruzzjonijiet Operattivi

To operate the tip-out trays, gently pull the top edge of the false cabinet front forward. The self-holding hinges will allow the tray to pivot outwards and downwards, providing access to the contents. To close, push the false cabinet front back into its original position until it is flush with the cabinet frame.

Quddiem view of two white tip-out trays installed under a kitchen sink, one holding a blue brush

Stampa 5.1: Quddiem view of the tip-out trays in an open position, revealing stored items.

6. Manutenzjoni

The polymer trays are designed for easy cleaning. They are dishwasher safe. For general cleaning, wipe with a damp cloth and mild detergent. Avoid abrasive cleaners that may damage the polymer surface.

7 Issolvi l-problemi

7.1 Hinge Rubbing or Sticking

If a hinge rubs or sticks when opening or closing, check the alignment of the hinge and the cabinet door. Ensure all screws are tightened appropriately, but not overtightened, which could cause misalignment. Minor adjustments to screw tightness or hinge position may resolve the issue.

7.2 Tray Not Closing Flush

If the tray does not close flush with the cabinet, verify that no items within the tray are obstructing its movement. Recheck hinge alignment and ensure the cabinet door itself is properly aligned with the cabinet frame.

8. Informazzjoni dwar Garanzija

The Rev-A-Shelf 14-inch Tip-Out Plastic Sink Trays come with a limited lifetime warranty. For specific details regarding warranty coverage and claims, please refer to the official Rev-A-Shelf websit jew ikkuntattja l-appoġġ tal-klijent.

9. Appoġġ

For further assistance, technical support, or to inquire about replacement parts, please visit the official Rev-A-Shelf Store jew ikkuntattja direttament lid-dipartiment tas-servizz tal-konsumatur tagħhom.

	Istruzzjonijiet għall-Installazzjoni tat-Trejs Rev-A-Shelf Soft-Close Tip-Out Gwida pass pass għall-installazzjoni tat-trejs tip-out b'għeluq soft-close ta' Rev-A-Shelf fil-kabinetti tal-bażi tas-sink. Tinkludi l-għodda meħtieġa, lista tal-partijiet, u struzzjonijiet dettaljati għat-tħejjija tal-pannelli, l-immuntar taċ-ċappetti, u t-twaħħil tat-trejs.
	Istruzzjonijiet għall-Installazzjoni tas-Sistema tat-Trej Tip-Out Rev-A-Shelf Gwida komprensiva għall-installazzjoni għas-Sistema ta' Trejs Rev-A-Shelf Tip-Out, li tkopri t-tipi ta' ċappetti, l-assemblaġġ tat-trejs, u l-immuntar għal trejs tal-polimeru u tas-serje slim. Tinkludi l-għodda meħtieġa, suġġerimenti utli, u kuntatt għall-appoġġ tal-klijenti.
	Istruzzjonijiet għall-Installazzjoni ta' Rev-A-Shelf Vanity/Base Cabinet Filler Gwida pass pass għall-installazzjoni tar-Rev-A-Shelf Vanity/Base Cabinet Filler, inklużi l-għodda meħtieġa, il-ħin tal-assemblaġġ, u pariri dwar il-manutenzjoni.
	Gwida għall-Installazzjoni tal-Inserzjoni tad-Diviżur tal-Kxaxen Fond tal-Kollezzjoni Rev-A-Shelf Istruzzjonijiet ta' installazzjoni pass pass u lista tal-partijiet għar-Rev-A-Shelf Craftsman Collection Deep Drawer Divider Insert. Jinkludi pariri dwar il-kura u l-manutenzjoni.
	Gwida għall-Installazzjoni tal-Unità Swing Out tas-Serje Rev-A-Shelf 4WP Istruzzjonijiet dettaljati għall-installazzjoni għar-Rev-A-Shelf 4WP Series Swing Out Unit, inkluża lista tal-partijiet, għodda meħtieġa, u gwida pass pass għall-integrazzjoni tal-kabinett.
	Istruzzjonijiet għall-Installazzjoni tal-Kit Rev-A-Shelf għall-Immuntar fuq il-Bieb Gwida komprensiva għall-installazzjoni tar-Rev-A-Shelf Door-Mount Kit, li tiddeskrivi l-partijiet, l-għodda, u l-assemblaġġ pass pass għall-bibien tal-kabinetti.

Rev-A-Shelf 6572-14-11-52

Rev-A-Shelf 14-Inch Tip-Out Plastic Sink Trays Instruction Manual