1. Introduzzjoni
1.1 Prodott Fuqview
The Bogen BG-NR100 Night Ringer is an essential component for integrating telephone ringing into a paging or public address system. It is engineered to detect incoming telephone ring signals or external contact closures and generate a loud, clear electronic ringer tone. Its compact design and low current draw make it an efficient and reliable solution for various commercial and industrial applications.
1.2 Karatteristiċi ewlenin
- Responds to 90V ring signals or external contact closures.
- Produces a clear dual-frequency electronic ringer tone.
- Easily connects to any standard paging system.
- Automatically mutes background music while ringing.
- Features a 0-level ringer volume control for adjustable output.
- Compact size for convenient installation.
- Low current draw for energy efficiency.
2. Informazzjoni dwar is-Sigurtà
Please read all safety instructions carefully before installing or operating the Bogen BG-NR100 Night Ringer. Failure to follow these instructions may result in electric shock, fire, or other hazards.
2.1 Prekawzjonijiet Ġenerali tas-Sigurtà
- Tesponix dan l-apparat għax-xita jew l-umdità.
- Timblokka l-ebda fetħiet tal-ventilazzjoni.
- Tinstallax ħdejn xi sorsi tas-sħana bħal radjaturi, reġistri tas-sħana, stufi, jew apparat ieħor li jipproduċi s-sħana.
- Uża biss aċċessorji/aċċessorji speċifikati mill-manifattur.
- Irreferi l-manutenzjoni kollha lil persunal tas-servizz kwalifikat.
2.2 Sigurtà Elettrika
- Tiżgura l-provvista tal-enerġija voltage matches the requirements specified for the device.
- Skonnettja l-enerġija qabel ma tagħmel xi konnessjonijiet jew twettaq manutenzjoni.
- Avoid touching exposed wires or terminals when the unit is powered.
- L-ert kif suppost huwa essenzjali għal tħaddim sikur.
3. Setup
3.1 Disimballaġġ
Carefully remove the Night Ringer from its packaging. Inspect the unit for any signs of damage that may have occurred during shipping. If damage is found, contact your supplier immediately.
3.2 Immuntar
The BG-NR100 is designed for surface mounting. Use appropriate screws (not supplied) to secure the unit to a wall or other stable surface using the mounting tabs on either side of the enclosure. Ensure the mounting location allows for adequate ventilation and access to connections.
3.3 Konnessjonijiet tal-Wiring
All connections are made via the screw terminal block located on the front of the unit. Ensure power is disconnected before making any wiring connections.
| Tikketta tat-Terminal | Deskrizzjoni | Funzjoni |
|---|---|---|
| TEL RING (T, R) | Telephone Ring Input | Connect to the tip (T) and ring (R) lines of a standard 90V telephone ring signal source. |
| CONTACT RING (A, B) | External Contact Closure Input | Connect to a dry contact closure (e.g., from a relay or switch) to trigger the ringer. |
| POWER SUPPLY (+24, -24) | Input tal-Enerġija | Connect to a regulated 24V DC power supply. Observe polarity (+24V to +24, -24V to -24). |
| BGM SOURCE (A, B) | Input tal-Mużika ta' Sfond | Connect the background music source here. The unit will mute this input during a ring event. |
| AMP INPUT (A, B) | Amplifier Input / Output to Paging System | Connect this output to the input of your paging amplifier or public address system. This carries the ringer tone and the muted BGM. |
4. Joperaw
4.1 Operazzjoni Bażika
Once properly connected and powered, the BG-NR100 will automatically detect an incoming 90V telephone ring signal or a closure on the Contact Ring terminals. Upon detection, the unit will generate a dual-frequency electronic ringer tone and simultaneously mute any background music connected to the BGM Source input. The ringer tone will be sent to the Amp Input terminals for connection to your paging system.
4.2 Kontroll tal-Volum
The ringer volume can be adjusted using the TONE VOL knob located on the top left of the unit. Rotate the knob clockwise to increase the volume and counter-clockwise to decrease it. Adjust the volume to a suitable level for your environment.
5. Manutenzjoni
5.1 Tindif
To clean the unit, wipe the exterior with a soft, dry cloth. Do not use liquid cleaners or aerosol cleaners. Ensure the unit is powered off and disconnected from all sources before cleaning.
5.2 Kura Ġenerali
The BG-NR100 is designed for reliable operation and requires minimal maintenance. Ensure it is installed in a location free from excessive dust, moisture, and extreme temperatures. Periodically check all wiring connections to ensure they are secure.
6 Issolvi l-problemi
If you experience issues with your Bogen BG-NR100 Night Ringer, refer to the following table for common problems and solutions.
| Problema | Kawża Possibbli | Soluzzjoni |
|---|---|---|
| No ringer tone output. | Ebda enerġija għall-unità. | Check power supply connections and ensure 24V DC is present. |
| Incorrect or no input signal (TEL RING or CONTACT RING). | Verify 90V ring signal on TEL RING or proper contact closure on CONTACT RING. | |
| Il-buttuna tal-volum hija ssettjata baxx wisq. | Adjust the TONE VOL knob clockwise. | |
| Ringer tone is distorted or weak. | Improper connection to paging ampaktar ħaj. | Tiżgura AMP INPUT is correctly connected to the amplifier input. Check ampsettings tal-lifier. |
| Background music does not mute. | BGM SOURCE not connected correctly. | Verify BGM SOURCE connections. Ensure the music source is routed through the Night Ringer. |
If the problem persists after attempting these solutions, please contact Bogen technical support or a qualified service technician.
7. Speċifikazzjonijiet
Technical specifications for the Bogen BG-NR100 Night Ringer:
| Attribut | Valur |
|---|---|
| Manifattur | ARC |
| Brand | Bogen |
| Numru tal-Mudell | BG-NR100 |
| Piż tal-oġġett | 1 lira |
| Dimensjonijiet tal-Prodott | 1 x 5 x 3 pulzieri |
| FCC Registration Number | CD23CH-17566-KX-N |
| Ekwivalenza Ringer | 1.1 B |
| Data L-Ewwel Disponibbli | 27 ta’ Novembru, 2013 |
8. Garanzija u Appoġġ
8.1 Informazzjoni dwar Garanzija
For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official Bogen website. Bogen Communications, Inc. typically provides a limited warranty against defects in materials and workmanship for a specified period from the date of purchase.
8.2 Appoġġ Tekniku
If you require technical assistance or have questions regarding the installation or operation of your BG-NR100 Night Ringer, please contact Bogen technical support. Contact information can usually be found on the Bogen websit jew fl-ippakkjar tal-prodott.
