Introduzzjoni
This manual provides instructions for the safe and efficient operation of your Globe Electric 24512 Daily Indoor Mechanical Timer. This device is designed to automatically turn electrical appliances on and off at programmed times, helping to conserve energy and enhance convenience. Please read these instructions thoroughly before first use and retain for future reference.
Informazzjoni Importanti dwar is-Sigurtà
- For indoor use only. Do not expose to moisture or extreme temperatures.
- Do not exceed the electrical ratings of the timer. Overloading may cause overheating and fire risk.
- Kun żgur li t-tajmer huwa pplaggjat sew f'sokit ertjat.
- Do not use with appliances that could cause dangerous conditions if left unattended, such as heating appliances or power tools.
- Always unplug the timer from the wall outlet before cleaning. Clean with a dry cloth only.
- Do not disassemble or attempt to repair the timer. Refer all servicing to qualified personnel.
Prodott Overview
The Globe Electric 24512 Mechanical Timer features a 24-hour dial with push-down pins for setting ON/OFF times and a manual override switch.

Figura 1: Quddiem View of Timer. This image displays the timer's face, highlighting the central rotating dial marked with hours (AM/PM) and the surrounding segments with push-down pins. A slider switch labeled "OUTLET ON" and "TIMER ON" is visible at the top.

Figura 2: Ġenb View of Timer. This image shows the timer from a side angle, revealing the standard three-prong electrical plug on the back for insertion into a wall outlet, and a two-prong outlet on the side where an appliance can be connected.
- 24-Hour Dial: The central rotating dial is marked with hours from 1 AM to 12 PM and 1 PM to 12 AM. It rotates clockwise over a 24-hour period.
- Programmable Pins: The outer ring consists of multiple segments (pins). Each pin represents a 15-minute interval. Pushing a pin DOWN activates the connected appliance during that interval; leaving it UP deactivates it.
- Swiċċ Manwal Override: Located at the top, this slider switch allows you to bypass the timer's programming.
- Żbokk: A standard electrical outlet on the side of the timer where your appliance plugs in.
Setup
- Issettja l-Ħin Kurrenti: Rotate the 24-hour dial clockwise until the current time aligns with the arrow indicator on the timer's face (refer to Figure 1). Ensure you distinguish between AM and PM hours.
- Ħinijiet tal-Programm ON/OFF:
- Each segment (pin) on the outer ring represents 15 minutes.
- Push DOWN all pins corresponding to the time periods you want the connected appliance to be ON.
- Leave UP all pins corresponding to the time periods you want the connected appliance to be OFF.
- Qabbad Appliance: Plug the appliance you wish to control into the outlet on the side of the timer (refer to Figure 2). Ensure the appliance's power switch is in the ON position.
- Tajmer tal-Ipplaggjar: Insert the timer into a standard 120V AC wall outlet.
- Agħżel il-Modalità Operattiva: Slide the manual override switch at the top to the "TIMER ON" position for automatic operation based on your programmed settings.
Istruzzjonijiet Operattivi
Once set up, the timer will automatically turn your connected appliance ON and OFF according to the programmed schedule. The dial will continuously rotate, indicating the current time.
Swiċċ Manwal Override
The manual override switch provides flexibility to control the appliance independently of the timer's program:
- TIMER ON: (Default position for programmed operation) The timer will follow the ON/OFF schedule set by the pins.
- OUTLET ON: The connected appliance will remain ON continuously, bypassing the timer's program. The timer dial will continue to rotate, but the output will stay ON.

Figure 3: Timer in Use. This image shows the timer plugged into a standard wall outlet, with a desk lamp's power cord plugged into the timer's side outlet, illustrating how the device controls an appliance.
Manutenzjoni
- Keep the timer clean and free from dust. Use a dry, soft cloth for cleaning.
- Tużax prodotti tat-tindif likwidi jew materjali li joborxu.
- Aħżen it-tajmer f'post frisk u niexef meta ma tkunx qed tuża.
Issolvi l-problemi
| Problema | Kawża Possibbli | Soluzzjoni |
|---|---|---|
| L-apparat ma jixgħelx/jitfix f'ħinijiet ipprogrammati. |
|
|
| Appliance does not turn ON at all. |
|
|
Speċifikazzjonijiet

Figure 4: Timer Dimensions. This image provides a visual representation of the timer's physical size, indicating its width, height, and depth measurements.
- Mudell: 24512
- Ditta: Globe Electric
- Tip: Daily Indoor Mechanical Timer
- Kulur: Abjad
- Input Voltage: 120V AC, 60Hz (Standard tal-Amerika ta' Fuq)
- Ħin Minimu ON/OFF: minuti 15
- Piż tal-oġġett: 4.9 uqija
- Dimensjonijiet tal-Prodott:
- Dimensjonijiet tal-Unità (Approssimattivi): 2.75 inches (W) x 2.75 inches (H) x 1.5 inches (D) (Refer to Figure 4)
- Dimensjonijiet tal-Ippakkjar: 7.5 x 5.25 x 7.5 pulzieri
- Batteriji Meħtieġa: Nru
- UPC: 058219245125
Garanzija u Appoġġ
For warranty information or technical support, please contact Globe Electric customer service. Refer to the product packaging or the official Globe Electric websit għad-dettalji ta' kuntatt attwali.
Websit: www.globe-electric.com





