Massima M90450

Manwal tal-Istruzzjonijiet tad-Dawl ta' Backup LED Tond tal-Karozza tal-Linja Maxxima M90450 Abjad ta' 7"

Mudell: M90450

1. Introduzzjoni

This manual provides essential instructions for the installation, operation, and maintenance of your Maxxima M90450 White 7" Round Bus LED Backup Light. Designed for demanding bus applications, this light offers powerful illumination for enhanced safety during reverse operations. Please read this manual thoroughly before installation and use to ensure proper function and longevity of the product.

2. Informazzjoni dwar is-Sigurtà

Osserva l-prekawzjonijiet ta' sigurtà li ġejjin biex tevita korriment jew ħsara lill-prodott u lill-vettura:

  • Dejjem skonnettja l-batterija tal-vettura qabel ma tagħmel xi xogħol elettriku.
  • Ensure proper wiring connections to avoid short circuits or electrical hazards.
  • Ilbes tagħmir protettiv personali xieraq, bħal nuċċalijiet u ingwanti tas-sigurtà, waqt l-installazzjoni.
  • Do not modify the product. Unauthorized modifications may compromise safety and void the warranty.
  • Ikkonsulta professjonist kwalifikat jekk m'intix ċert dwar xi passi tal-installazzjoni.

3. Kontenut tal-Pakkett

Iċċekkja li l-oġġetti kollha huma preżenti qabel tibda l-installazzjoni:

  • 1 x Maxxima M90450 White 7" Round Bus LED Backup Light
  • 1 x Mounting Gasket

4. Istruzzjonijiet ta 'installazzjoni

The Maxxima M90450 is designed for a standard 4-hole surface mount. Follow these steps for proper installation:

  1. Preparazzjoni: Choose a suitable mounting location on the vehicle's exterior, typically at the rear, ensuring it is flat and provides adequate clearance.
  2. Tħaffir: Use the light as a template to mark the four mounting holes and a central hole for wiring. Drill pilot holes for the mounting screws and a larger hole for the wiring.
  3. Wiring: The light features 2 wire leads. Connect the positive wire (typically red) to the vehicle's reverse light circuit and the negative wire (typically black) to a reliable ground point on the vehicle chassis. Ensure all connections are secure and insulated.
  4. Immuntar: Place the included mounting gasket between the light and the vehicle surface. Align the light with the drilled holes and secure it using appropriate fasteners (not included) through the four mounting holes. Tighten screws evenly to ensure a watertight seal with the gasket.
  5. Ittestjar: Reconnect the vehicle's battery. Engage reverse gear (with the parking brake applied and vehicle safely secured) to test the light's functionality.
Maxxima M90450 White 7-inch Round Bus LED Backup Light, front view showing 20 white LEDs and clear polycarbonate lens.
This image displays the front of the Maxxima M90450 LED backup light. It features a clear, round polycarbonate lens with 20 individual white LEDs arranged in a circular pattern around a central cluster. Four mounting holes are visible on the outer edge of the light.

5. Istruzzjonijiet Operattivi

The Maxxima M90450 LED Backup Light operates automatically when properly connected to your vehicle's reverse light circuit. When the vehicle is shifted into reverse, the light will illuminate, providing bright white light for improved visibility.

6. Manutenzjoni

The Maxxima M90450 LED Backup Light is designed for durability with sealed, moisture-proof electronics and a rugged polycarbonate lens and housing, requiring minimal maintenance.

  • Tindif: Periodically clean the lens with a soft cloth and mild soap and water to ensure maximum light output. Avoid abrasive cleaners.
  • Spezzjoni: Regularly check the mounting screws for tightness and the wiring for any signs of wear or damage.

7 Issolvi l-problemi

If the LED backup light is not functioning as expected, consider the following:

  • Light does not illuminate:
    • Check the vehicle's fuse for the reverse light circuit.
    • Verify all wiring connections (positive, negative, and ground) are secure and free from corrosion.
    • Ensure the vehicle is properly shifted into reverse.
  • Id-dawl huwa baxx jew jitteptep:
    • Spezzjona l-wajers għal konnessjonijiet maħlula jew ħsara.
    • Check the vehicle's electrical system for proper voltage (12.8VDC).
    • Naddaf il-lenti jekk tkun maħmuġa.

If issues persist after troubleshooting, contact Maxxima customer support or a qualified technician.

8. Speċifikazzjonijiet

KaratteristikaDettall
MudellM90450
Għadd tal-LED20 LED abjad
ImmuntarStandard 4-Hole Surface Mount
Konnessjoni2 Wajers
Voltage12.8VDC
Amp Iġbed250mA
Dimensjonijiet7.0" Diameter x 1.2" Depth (7.3 x 7.1 x 1.8 inches overall)
Materjal tal-LentiPolikarbonat
Materjal tad-DjarPolikarbonat
Karatteristiċi SpeċjaliSealed Moisture Proof Electronics, Waterproof
KonformitàDOT/SAE J593
Piż11.2 uqija

9. Garanzija u Appoġġ

The Maxxima M90450 White 7" Round Bus LED Backup Light is backed by a 5-year warranty. For technical support, warranty claims, or further assistance, please contact Maxxima customer service. Keep your purchase receipt as proof of purchase.

For more information, visit the official Maxxima webis-sit jew irreferi għall-imballaġġ tal-prodott tiegħek.

Dokumenti Relatati - M90450

Preview Gwida għall-Installazzjoni u l-Garanzija tad-Dawl tas-Saqaf Maxxima MCL-715705
Istruzzjonijiet komprensivi għall-installazzjoni u informazzjoni dwar il-garanzija għad-Dawl tas-Saqaf Tond LED Maxxima MCL-715705. Ikopri l-immuntar tal-kaxxa tal-junction u l-immuntar ta' retrofit, bi twissijiet u prekawzjonijiet ta' sigurtà.
Preview Gwida għall-Installazzjoni tad-Dawl tas-Saqaf LED Tond ta' 12" 24W Maxxima MCL-6122105B
Gwida għall-installazzjoni għad-Dawl tas-Saqaf LED Tond ta' 12" u 24W Maxxima MCL-6122105B. Tinkludi twissijiet ta' sigurtà, passi ta' installazzjoni, u informazzjoni dwar garanzija limitata ta' 3 snin.
Preview Gwida għall-Installazzjoni ta' Maxxima Round LED Slim Gimbal Downlight
Gwida għall-installazzjoni għal Maxxima Round LED Slim Gimbal Downlight, inklużi n-numri tal-mudelli MRL-S208205(B) u MRL-S414205(B). Tipprovdi struzzjonijiet pass pass, twissijiet ta' sigurtà, u informazzjoni dwar il-garanzija.
Preview Gwida għall-Installazzjoni ta' Maxxima Slim Round Trimless Downlight
Gwida komprensiva għall-installazzjoni tal-Maxxima Slim Round Trimless Downlight (mudelli MRL-S412105, MRL-412105B). Tinkludi twissijiet ta' sigurtà, prekawzjonijiet, struzzjonijiet pass pass, u dettalji tal-garanzija.
Preview Maxxima 4-inch Round/Square Sloped Ceiling Downlight Installation Guide
Installation guide for the Maxxima 4-inch Round/Square Sloped Ceiling Downlight, including safety warnings, cautions, step-by-step instructions, and warranty information. Model numbers: MRL-S415305, MRL-S415305B, MRL-S415305S, MRL-S415305SB.
Preview Gwida għall-Installazzjoni tas-Swiċċ ta' Pol Uniku Maxxima MEW-RS100W b'Sokit tal-Enerġija
Istruzzjonijiet għall-installazzjoni u informazzjoni dwar il-garanzija għas-Swiċċ Maxxima MEW-RS100W b'Pol Uniku b'Sokit tal-Enerġija. Tgħallem kif tinstalla u tqabbad l-apparat b'mod sigur.