Manwal tal-Utent tal-Miter tal-Umdità mingħajr Pinnijiet FLIR MR77

1. Introduzzjoni

The FLIR MR77 Pinless Moisture Meter is a professional-grade instrument designed for accurate moisture and environmental measurements. This device combines pinless moisture detection with an external pin probe, relative humidity, and temperature sensing capabilities, making it a versatile tool for various applications.

This manual provides detailed instructions for the setup, operation, maintenance, and troubleshooting of your FLIR MR77 meter to ensure optimal performance and longevity.

2. Żpakkjar u Kontenut

Carefully unpack all items from the packaging. Verify that all components are present and undamaged. If any items are missing or damaged, contact your supplier immediately.

Kontenut tal-Pakkett:

• FLIR MR77 Moisture Meter
• Temperature/Relative Humidity Sensor (MR01)
• Pin Probe (MR02)
• Batterija 9V
• Manwal għall-Utent (dan id-dokument)

Figure 2.1: The FLIR MR77 Pinless Moisture Meter with its integrated sensor and display.

3. Konfigurazzjoni u Installazzjoni tal-Batterija

3.1 Installazzjoni tal-batterija

1. Sib il-kompartiment tal-batterija fuq wara tal-miter.
2. Iftaħ l-għatu tal-kompartiment tal-batterija.
3. Insert the included 9V battery, observing correct polarity.
4. Agħlaq l-għatu tal-kompartiment tal-batterija sew.

3.2 Attaching Sensors

The MR77 comes with an integrated pinless sensor and ports for external sensors.

• Temperature/Relative Humidity Sensor (MR01): This sensor is typically pre-attached to the top of the unit. Ensure it is securely fastened for accurate environmental readings.
• Pin Probe (MR02): For penetrating moisture measurements, connect the pin probe cable to the designated port on the side of the MR77.

Figure 3.1: The external temperature and relative humidity sensor (MR01).

Figure 3.2: The pin probe (MR02) for penetrating moisture measurements.

4. Istruzzjonijiet Operattivi

4.1 Tixgħel/Jitfi

Agħfas il- Qawwa button (usually located at the bottom of the device) to turn the meter on or off.

4.2 Display Overview

Figure 4.1: Close-up of the MR77 display showing various readings.

The backlit LCD displays moisture readings, relative humidity, air temperature, dew point, and other relevant data. Icons indicate measurement mode, battery status, and other functions.

4.3 Modi ta' Kejl

The FLIR MR77 offers multiple measurement capabilities:

• Pinless Moisture: For non-invasive moisture detection up to 0.75 inches (19 mm) deep. Place the back of the meter flat against the surface to be measured.
• Pin Moisture: Use the external pin probe for direct contact measurements in materials like wood or drywall. Insert the pins into the material.
• Umdità Relattiva (RH): Ikejjel il-perċentwaltage of moisture in the air using the integrated or external RH sensor.
• Temperatura tal-arja: Measures ambient air temperature.
• Punt tan-nida: Calculates the dew point temperature based on RH and air temperature.
• Non-Contact IR Thermometer: Use the IR button and laser pointer to measure surface temperatures.

Figure 4.2: Performing a pinless moisture measurement with the FLIR MR77.

Figure 4.3: Using the integrated IR thermometer with laser targeting.

4.4 Material Group Selection

The MR77 allows selection of different material groups for more accurate moisture readings. Refer to the "Material Group Reference" table in the Specifications section for details on specific materials.

Figure 4.4: The display indicating the selected material group (M09) and Relative Humidity (RH).

4.5 Ħażna u Rakkonti tad-Data

Uża l- AĦŻEN/SEJĦAR button to save and retrieve measurement data. Consult the full user manual for detailed instructions on data logging and management.

4.6 Meter Link Smartphone App

The FLIR MR77 can connect to a smartphone app via Bluetooth for enhanced data monitoring, comparison, and reporting. Download the Meter Link app from your device's app store.

Figure 4.5: The Meter Link smartphone app interface for data monitoring and comparison.

5. Manutenzjoni

5.1 Tindif

Imsaħ il-barra tal-miter b'reklamaramp cloth. Do not use abrasive cleaners or solvents. Keep the sensor areas clean and free of debris.

5.2 Sostituzzjoni tas-Sensor

The temperature/relative humidity sensor (MR01) is field-replaceable. If readings become inaccurate or the sensor is damaged, replace it with an authorized FLIR replacement part. Refer to the full user manual for detailed replacement instructions.

5.3 Ħażna

Store the FLIR MR77 in a cool, dry place when not in use. Remove the battery if storing for extended periods to prevent leakage.

6 Issolvi l-problemi

For further assistance, refer to the official FLIR MR77 User Manual (PDF) or contact FLIR customer support.

7. Speċifikazzjonijiet

Speċifikazzjonijiet Ġenerali:

• Mudell: MR77
• Dimensjonijiet: 6.3 x 3 x 8 pulzieri (16 x 7.6 x 20.3 ċm)
• Piż: 1.54 Lira (0.7 Kilogrammi)
• Batterija: 1 Lithium Ion battery (included), 9V Alkaline recommended for replacement.
• Ħajja tal-batterija: Approximately 100 hours (without worklight)
• Manifattur: Sistemi FLIR
• Tip ta 'Immuntar: Mejda
• Reżistenza għall-waqgħa: Withstands a drop of 2 meters.

Speċifikazzjonijiet tal-Kejl:

• Pinless Moisture Depth (Max): 0.75 pulzieri (19 mm)
• Pin Moisture Range: 7–30% (100% reference only)
• Pin Moisture Accuracy: ±1.5% MC (Moisture Content)
• Pinless Moisture Range: 0–99.9 (relative measurement)
• Firxa ta' Umdità Relattiva: 10–90%
• Eżattezza tal-Umdità Relattiva: ±2.5% RH
• Vapor Pressure Range: 0.0–20.0 kPa
• Vapor Pressure Accuracy: Greater of ±2.0 or 0.2 kPa
• Firxa tat-Temperatura tal-Punt tan-nida: -22°F sa 122°F (-30°C sa 50°C)

Figure 7.1: Detailed specifications for the FLIR MR77.

Material Group Reference:

Figure 7.2: Reference table for selecting appropriate material groups for moisture measurements.

This table provides common names of timbers and other materials, along with their corresponding material group numbers (e.g., Group 1-8 for timbers, Group 9 for plywood, drywall, and oriented strand board, Group 10 for brick, cement screed, and concrete, Group 11 for cement mortar, anhydrite screed, lime mortar, and plaster). Groups 10 and 11 are not specified for accuracy and should be used for reference only.

8. Informazzjoni dwar Garanzija

The FLIR MR77 Pinless Moisture Meter is covered by a Garanzija Limitata tul il-Ħajja. For specific terms and conditions, including details on coverage and how to make a warranty claim, please refer to the official warranty documentation provided with your product or visit the FLIR websit.

9. Appoġġ u Riżorsi Addizzjonali

For further information, technical support, or to access the complete user manual, please use the resources below:

• Niżżel il-Manwal Sħiħ tal-Utent (PDF)
• Visit the Official FLIR Store on Amazon
• Contact FLIR Customer Support (refer to FLIR's official webis-sit għad-dettalji ta' kuntatt).