AIRAM 79W 80mm Linear Halogen Bulb Istruzzjoni Manwal

1. Introduzzjoni

This manual provides essential instructions for the safe installation, operation, and maintenance of your AIRAM 79W 80mm Linear Halogen Bulb. Please read this manual thoroughly before use and retain it for future reference.

2. Informazzjoni dwar is-Sigurtà

Dejjem osserva l-prekawzjonijiet ta' sigurtà li ġejjin biex tevita korrimenti jew ħsara:

• Itfi: Always ensure the power supply to the fixture is switched off at the mains before installing, removing, or cleaning the bulb.
• Kessaħ: Allow the bulb to cool completely before handling. Halogen bulbs operate at high temperatures and can cause severe burns.
• Immaniġġjar kif suppost: Avoid touching the glass part of the bulb with bare hands. Oils from your skin can create hot spots, leading to premature failure. Use a clean cloth or gloves.
• Correct Wattage: Uża biss bozoz bl-ilma korretttage u voltage for your fixture. Exceeding the maximum wattage can cause overheating and fire.
• Rimi: Armi l-bozoz użati skont ir-regolamenti lokali.
• Użu fuq ġewwa: This bulb is designed for indoor use unless specified otherwise by the fixture.

3. Prodott Aktarview

The AIRAM 79W 80mm Linear Halogen Bulb is an energy-efficient light source designed for various lighting applications. It provides a warm white light with a luminous flux of 1000 lumens, equivalent to a 100-watt incandescent bulb. Its linear design and R7s base make it suitable for specific linear halogen fixtures.

Image: A clear glass linear halogen bulb with white ceramic R7s end caps. The bulb features a filament running through its center and is designed for specific fixtures requiring an 80mm linear bulb.

4. Setup u Installazzjoni

Follow these steps to safely install your linear halogen bulb:

1. Itfi l-Enerġija: Locate the light fixture's power switch and turn it off. For added safety, switch off the circuit breaker supplying power to the fixture.
2. Ħalli tkessiħ: If replacing an old bulb, wait for it to cool down completely before touching it.
3. Neħħi l-Bozza l-Qadima (jekk applikabbli): Carefully remove the old bulb from the fixture. Linear halogen bulbs typically have spring-loaded contacts. Gently push one end of the bulb towards the opposite contact and then pull it out.
4. Daħħal Bozza Ġdida: Holding the new AIRAM bulb with a clean cloth or gloves, align one end of the bulb with one of the R7s contacts in the fixture. Gently push the bulb towards that contact, compressing the spring, and then guide the other end into the opposite contact. Ensure both ends are securely seated.
5. Irrestawra l-Enerġija: Once the bulb is securely in place, restore power to the fixture at the circuit breaker and then turn on the light switch.

5. Istruzzjonijiet Operattivi

The AIRAM 79W 80mm Linear Halogen Bulb operates immediately upon receiving power. Simply use the light switch connected to your fixture to turn the bulb on or off. No special operating procedures are required.

6. Manutenzjoni

Minimal maintenance is required for your halogen bulb:

• Tindif: If the bulb becomes dusty, ensure the power is off and the bulb is cool. Gently wipe the glass with a soft, dry, lint-free cloth. Do not use liquid cleaners.
• Sostituzzjoni: Replace the bulb when it reaches the end of its lifespan or fails. Refer to the installation section for replacement instructions.

7 Issolvi l-problemi

If your AIRAM halogen bulb is not functioning correctly, consider the following:

• Il-bozza ma tixgħelx:
  • Iċċekkja jekk is-swiċċ tal-enerġija huwiex mixgħul.
  • Ivverifika li s-circuit breaker għall-apparat tad-dawl ma jkunx qabad.
  • Ensure the bulb is correctly and securely seated in the fixture's contacts.
  • The bulb may have reached the end of its life and needs replacement.
• Dawl Teptip:
  • Check for loose connections in the fixture or bulb contacts.
  • Ensure the bulb is fully compatible with any dimmer switches in use.

Jekk il-problemi jippersistu wara li tiċċekkja dawn il-punti, ikkonsulta elettriċista kwalifikat.

8. Speċifikazzjonijiet

9. Garanzija u Appoġġ

Għal informazzjoni dwar il-garanzija jew appoġġ tekniku, jekk jogħġbok irreferi għall-bejjiegħ bl-imnut jew lir-rappreżentant uffiċjali tal-manifattur. websit. Żomm il-prova tax-xiri tiegħek għal kwalunkwe talba ta' garanzija.