Introduzzjoni
This manual provides essential instructions for the safe and efficient operation, maintenance, and troubleshooting of your Adcraft WB-100 Low Volume Manual Fill Hot Water Dispenser Boiler. Please read this manual thoroughly before initial use and retain it for future reference.
Immaġni: Quddiem view of the Adcraft WB-100 Hot Water Dispenser Boiler, showcasing its stainless steel construction, water level gauge, spigot, and temperature control knob.
Istruzzjonijiet Importanti dwar is-Sigurtà
To reduce the risk of fire, electric shock, or injury, always follow basic safety precautions when using electrical appliances. This appliance heats water to high temperatures; exercise extreme caution.
- Aqra l-istruzzjonijiet kollha qabel l-użu.
- Tmissx uċuħ sħan. Uża manki jew pumi.
- Biex tipproteġi kontra perikli elettriċi, m'għandekx tgħaddas il-korda, il-plakek, jew l-apparat fl-ilma jew likwidu ieħor.
- Superviżjoni mill-qrib hija meħtieġa meta xi apparat jintuża minn jew ħdejn it-tfal.
- Spluggja mill-iżbokk meta ma tkunx qed tuża u qabel tnaddaf. Ħallih jiksaħ qabel ma tpoġġi jew tneħħi l-partijiet, u qabel tnaddaf l-apparat.
- Tħaddim l-ebda apparat b'korda jew plagg bil-ħsara, jew wara li l-apparat ma jaħdimx jew ikun ġie bil-ħsara b'xi mod.
- L-użu ta' aċċessorji aċċessorji mhux rakkomandati mill-manifattur tal-apparat jista' jikkawża korrimenti.
- Tużax barra.
- Tħallix il-korda tistrieħ fuq it-tarf tal-mejda jew tal-bank, jew tmiss uċuħ sħan.
- Tpoġġix fuq jew ħdejn burner tal-gass sħun jew elettriku, jew f'forn imsaħħan.
- Dejjem waħħal il-plagg mal-apparat l-ewwel, imbagħad daħħal il-korda fis-sokit tal-ħajt. Biex tiskonnettja, itfi kwalunkwe kontroll, imbagħad neħħi l-plagg mis-sokit tal-ħajt.
- Tużax l-apparat għal użu ieħor minbarra dak maħsub.
Twaqqif u l-Ewwel Użu
- Spakkjar: Carefully remove the hot water dispenser from its packaging. Retain packaging materials for future storage or transport.
- Spezzjoni: Inspect the unit for any signs of damage. If damaged, do not operate and contact your supplier.
- Pjazzament: Place the unit on a stable, level, heat-resistant surface. Ensure there is adequate clearance around the unit for ventilation. The non-slip rubber feet provide stability.
- Tindif Inizjali: Before first use, wash the interior of the dispenser and the lid with warm, soapy water. Rinse thoroughly and dry.
- Konnessjoni tal-Enerġija: Ensure the power switch is in the "OFF" position. Plug the 3-foot power cord (NEMA 5-15 plug) into a grounded 120V AC electrical outlet. The unit requires 1350W and 11.25 Amps.
Istruzzjonijiet Operattivi
- Imla l-Unità: Remove the lid and manually fill the dispenser with clean water. Do not fill above the "MAX" fill line indicated on the interior or water level gauge. The unit has a 100-cup (6.25 gallon) capacity.
- Tiżgura l-għatu: Place the lid securely back onto the dispenser.
- Tixgħel: Flip the illuminated power switch to the "ON" position. The switch will light up, indicating the unit is receiving power and beginning to heat.
- Issettjar tat-Temperatura: Use the variable temperature control knob located at the base of the unit to select your desired water temperature. The range is from 85°F to 220°F.
- Proċess tat-Tisħin: The unit will begin heating the water. The extra-large encapsulated heating element ensures fast and even heating. Monitor the water level gauge on the side of the unit.
- Tqassim ta' Ilma sħun: Once the desired temperature is reached, place a cup or container under the spigot. Push down the lever on the spigot to dispense hot water. Release the lever to stop the flow.
- Mili mill-ġdid: If the water level becomes low, turn off the unit, unplug it, and allow it to cool slightly before refilling.
- Trasport: Use the cool-to-touch bakelite handles for safe transportation of the unit when empty or cool.
Immaġni: Close-up view of the variable temperature control knob, allowing adjustment of water temperature between 85°F and 220°F.
Immaġni: Close-up view of the dispensing spigot and the clear water level gauge, which allows monitoring of the water volume inside the boiler.
This hot water dispenser is suitable for preparing various hot beverages and foods, including tea, coffee, instant noodles, and soups. It can also be used to keep sauces like Au Jus or barbecue sauce warm.
Kura u Manutenzjoni
Regular cleaning and maintenance will ensure the longevity and optimal performance of your Adcraft hot water dispenser.
- Tindif ta 'Kuljum:
- Dejjem aqla l-unità u ħalliha tiksaħ kompletament qabel tnaddaf.
- Vojta kwalunkwe ilma li jkun fadal.
- Wash the interior and exterior stainless steel surfaces with a mild detergent and a soft cloth or sponge.
- Rinse thoroughly with clean water. Do not immerse the electrical base in water.
- Dry all surfaces completely before storing or next use.
- Tneħħija tal-Ġebla: Over time, mineral deposits (limescale) may build up, especially in hard water areas.
- To descale, fill the unit with a solution of equal parts white vinegar and water.
- Heat the solution to approximately 150°F (65°C) and let it stand for 30-60 minutes. Do not boil.
- Drain the solution and rinse the interior several times with fresh water to remove any vinegar residue.
- Irrepeti jekk meħtieġ.
- Ħażna: Store the clean and dry unit in a cool, dry place.
Issolvi l-problemi
Qabel ma tikkuntattja lis-servizz tal-konsumatur, jekk jogħġbok irreferi għall-kwistjonijiet u s-soluzzjonijiet komuni li ġejjin:
| Problema | Kawża Possibbli | Soluzzjoni |
|---|---|---|
| L-unità ma ssaħħanx. | Not plugged in; power switch off; circuit breaker tripped; faulty power cord/element. | Ensure unit is plugged in and power switch is ON. Check circuit breaker. If problem persists, contact qualified service personnel. |
| Water heats too slowly. | Limescale buildup; insufficient power supply. | Perform descaling procedure. Ensure unit is connected to a dedicated 120V outlet. |
| Water leaks from spigot. | Spigot not fully closed; damaged spigot seal. | Ensure spigot lever is fully released. If leaking continues, the spigot may need replacement or repair by a qualified technician. |
| Water level gauge unclear. | Mineral deposits on gauge. | Clean the exterior of the gauge. If internal, descaling may help. |
For issues not listed here or if troubleshooting steps do not resolve the problem, please contact Adcraft customer support.
Speċifikazzjonijiet tal-Prodott
- Mudell: WB-100
- Kapaċità: 100 Cups (approximately 6.25 Gallons)
- Materjal: Kostruzzjoni Stainless Steel
- Qawwa: 120V, 1350W, 11.25 Amps
- Tip ta 'plagg: NEMA 5-15
- Firxa tat-Temperatura: 85°F - 220°F (30°C - 104°C)
- Dimensjonijiet (L x W x H): 12.6 x 10.83 x 22.91 pulzieri
- Piż: 1 Pound (approximate, unit weight only)
- Ċertifikazzjonijiet: ETL Listed, ETL Sanitation, NSF
- Karatteristiċi Speċjali: Temperature Control, Water Level Indicator, Heat-resistant side handles, Illuminated power switch.
Garanzija u Appoġġ
This Adcraft WB-100 Hot Water Dispenser Boiler is covered by the Adcraft One-Year Limited Warranty. This warranty covers defects in material and workmanship under normal use for a period of one year from the date of purchase.
For warranty claims, technical support, or to inquire about replacement parts, please contact Adcraft customer service. Please have your model number (WB-100) and proof of purchase available when contacting support.
Contact information for Adcraft can typically be found on their official webis-sit jew fuq l-imballaġġ tal-prodott.
