Legrand 351000

Legrand Sound Speaker Basic with 2-Wire for Sound Systems - Model 351000 Instruction Manual

1. Prodott Aktarview

This manual provides detailed instructions for the installation, operation, and maintenance of the Legrand Sound Speaker Basic, Model 351000. This device is an audio door speaker module designed for 2-wire sound systems, specifically for use with BUS technology intercom systems.

The module supports up to 4 control buttons and is intended for undercover mounting.

2. Setup u Installazzjoni

Proper installation is crucial for optimal performance and safety. It is recommended that installation be performed by a qualified technician.

2.1 Komponenti

2.2 Immuntar

The module is designed for undercover mounting. Ensure the mounting location is secure and provides adequate space for wiring connections.

Legrand 351000 Audio Door Speaker Module front view

Figura 1: Quddiem view of the Legrand 351000 Audio Door Speaker Module. This image displays the speaker grille, microphone, and connection points for control buttons, indicating the internal layout for installation.

2.3 Konnessjonijiet tal-Wiring

  1. Skonnettjar tal-Enerġija: Before making any connections, ensure that the power to the BUS system is completely disconnected to prevent electrical shock.
  2. BUS Connection: Connect the 2-wire BUS system cables to the designated terminals on the speaker module. Refer to the BUS system's main unit manual for specific wiring diagrams.
  3. Button Connections: If using external control buttons (e.g., for door release or additional functions), connect them to the appropriate terminals on the module. The module supports up to 4 buttons.
  4. Konnessjonijiet sikuri: Kun żgur li l-konnessjonijiet kollha tal-wajers huma sikuri u iżolati sew.

After all connections are made, restore power to the BUS system.

3. Istruzzjonijiet Operattivi

The Legrand 351000 module functions as an audio interface within a 2-wire BUS intercom system. Its operation is primarily controlled by the main intercom unit and associated call buttons.

3.1 Funzjonalità Bażika

3.2 Call Buttons

If external call buttons are connected, pressing a button will initiate a call to the corresponding indoor unit(s) as configured in the BUS system.

4. Manutenzjoni

The Legrand 351000 module requires minimal maintenance to ensure long-term performance.

4.1 Tindif

4.2 Spezzjoni

Periodically inspect the module for any visible damage or loose connections. If any issues are found, consult a qualified technician.

5 Issolvi l-problemi

This section addresses common issues that may arise during the use of the Legrand 351000 module.

ProblemaKawża PossibbliSoluzzjoni
L-ebda awdjo mill-kelliemLoose wiring connection; Faulty speaker; System power issue.Check all wiring connections. Verify system power. If problem persists, contact support.
Il-mikrofonu ma jiġborx il-ħossObstructed microphone; Loose wiring connection; Faulty microphone.Ensure microphone is clear. Check wiring. If problem persists, contact support.
Call buttons not respondingIncorrect wiring of buttons; Faulty buttons; System configuration issue.Verify button wiring. Test buttons. Check BUS system configuration.
Operazzjoni intermittentiUnstable power supply; Loose BUS connection; Environmental interference.Ensure stable power. Secure BUS connections. Consult system manual for interference mitigation.

For issues not listed here or if troubleshooting steps do not resolve the problem, please contact Legrand customer support or a qualified service technician.

6. Speċifikazzjonijiet Tekniċi

Legrand 351000 Audio Door Speaker Module dimensions

Figura 2: Dimensional drawing of the Legrand 351000 module, showing a width of 115 mm and a height of 91 mm. This provides precise measurements for installation planning.

7. Garanzija u Appoġġ

For warranty information, technical support, or service inquiries, please refer to the official Legrand website or contact your local Legrand distributor. Keep your purchase receipt as proof of purchase.

Dokumenti Relatati - 351000

Preview Legrand Wiremold AL5200 Series Architectural Aluminum Raceway Systems
Detailed information on the Legrand Wiremold AL5200 Series Architectural Aluminum Raceway, including its sleek design, features, benefits, system layout, dimensions, wire fill capacities for power and communications, and comprehensive ordering information for bases, covers, dividers, fittings, and device plates. Ideal for commercial, laboratory, and healthcare environments.
Preview On-Q Home Systems Product Catalog 09/10 by Legrand
Explore the Legrand On-Q Home Systems 2009/2010 product catalog, featuring integrated solutions for entertainment, communications, and comfort. Discover home automation, audio, intercom, security, and networking products designed for modern living.
Preview Smarther NETATMO User and Installation Manual by Legrand/Bticino
Comprehensive user and installation manual for the Smarther NETATMO smart thermostat by Legrand/Bticino, covering setup, operation, app control, and technical specifications.
Preview Katalogu tal-Apparati Modulari u l-Bordijiet tad-Distribuzzjoni ta' Legrand tal-2025
Katalogu komprensiv ta' apparati modulari u bordijiet ta' distribuzzjoni Legrand għal installazzjonijiet elettriċi u distribuzzjoni tad-dejta, li jinkludi circuit breakers, apparati ta' kurrent residwu, apparati ta' protezzjoni kontra ż-żidiet fil-vultaġġ, swiċċijiet, u bordijiet ta' distribuzzjoni. Jinkludi speċifikazzjonijiet tal-prodott, dettalji tekniċi, u informazzjoni dwar l-ordnijiet.
Preview Legrand Smarther AC bit-Termostat Intelliġenti Netatmo - Speċifikazzjonijiet Tekniċi u Gwida għall-Installazzjoni
Detailed information about the Legrand Smarther AC with Netatmo smart thermostat, including features, technical specifications, installation diagrams, and compatibility for HVAC systems. Control your heating and cooling remotely via Wi-Fi and voice assistants.
Preview Legrand Gateway-module with Netatmo: Technical Specification and User Guide
Detailed technical specifications, installation guide, and configuration instructions for the Legrand Gateway-module with Netatmo, enabling smart home automation via Wi-Fi and RF connectivity. This module acts as a gateway between the IP network and connected Legrand devices.