KEYSIGHT U1272A Handheld Digital Multimeter User Manual

1. Introduzzjoni

This manual provides essential information for the safe and effective operation of the KEYSIGHT U1272A Handheld Digital Multimeter. The U1272A is a robust, 4.5-digit, water and dust resistant multimeter designed for professional use in various electrical measurement applications. It features an Organic LED display and intelligent functions to enhance productivity and safety.

2. Informazzjoni dwar is-Sigurtà

TWISSIJA:

• Dejjem żomm mal-kodiċijiet tas-sigurtà lokali u nazzjonali.
• Do not use the multimeter if it appears damaged or is operating abnormally.
• Kun żgur li l-wajers tat-test ikunu f'kundizzjoni tajba u konnessi sew qabel ma tieħu l-kejl.
• Osserva l-klassifikazzjonijiet tat-terminals kollha u l-valuri massimi tad-dħul.
• Dan il-prodott huwa maħsub għal użu professjonali biss.

The U1272A is rated CAT IV 600V and CAT III 1000V, indicating its suitability for measurements in high-energy electrical environments. Always use appropriate personal protective equipment (PPE).

3. Prodott Aktarview

The KEYSIGHT U1272A is designed for ergonomic handling and durability, featuring an IP54 rating for water and dust resistance.

Figura 3.1: Quddiem view of the U1272A multimeter, showing the OLED display, function dial, and input terminals.

Figura 3.2: Ġenb view of the U1272A multimeter, highlighting its ergonomic, non-slip design.

Figura 3.3: Lura view of the U1272A multimeter, showing the battery compartment and stand.

Karatteristiċi ewlenin:

• 30,000 counts resolution with 0.7% for ACV accuracy.
• Organic LED (OLED) display for clear readings in various lighting conditions.
• Intelligent features like Low Pass Filter (LPF) for noise elimination and Qik-V for quick AC/DC voltage determination.
• Visual alert blinks in addition to the beeper for Continuity test in noisy environments.
• IP54 certified for water and dust resistance.
• Connectivity to PC/internal memory for logging up to 10,000 readings.

4. Setup

4.1 Installazzjoni tal-batterija

The U1272A is powered by batteries. To install or replace batteries:

1. Ensure the multimeter is turned OFF and disconnect all test leads from the terminals.
2. Locate the battery compartment cover on the back of the unit (refer to Figure 3.3).
3. Unscrew the retaining screws and carefully remove the cover.
4. Insert new batteries, observing correct polarity (+/-) as indicated inside the compartment.
5. Ibdel l-għatu u waħħalha bil-viti.

4.2 Qawwa Inizjali

After battery installation, turn the rotary switch to any function to power on the device. The OLED display will illuminate, and a self-test will be performed. If the display does not light up, check battery installation.

5. Istruzzjonijiet Operattivi

5.1 Kejl Bażiku

To perform basic measurements, select the desired function using the rotary switch and connect the test leads to the appropriate input terminals.

• Voltage Measurement (V~, V-): Connect the red lead to the VΩHz terminal and the black lead to the COM terminal. Select AC (V~) or DC (V-) voltage.
• Current Measurement (A, mA, µA): Connect the red lead to the appropriate current terminal (10A, 440mA, or µA) and the black lead to the COM terminal. Select the desired current range. Ensure the circuit is de-energized before connecting the multimeter in series.
• Kejl tar-Reżistenza (Ω): Connect the red lead to the VΩHz terminal and the black lead to the COM terminal. Select the Ω function.
• Continuity Test (audible beep and visual alert): Connect the red lead to the VΩHz terminal and the black lead to the COM terminal. Select the continuity function. The meter will beep and visually alert for continuity.

5.2 Karatteristiċi Avvanzati

• LPF (Filtru Pass Baxx): Activates a low pass filter to remove high-frequency noise and harmonics, useful for measurements on variable frequency drives (VFDs).
• Qik-V: Allows for quick determination of AC or DC voltage without manually selecting the mode.
• Logging tad-Data: The U1272A can store up to 10,000 readings. Refer to the detailed user manual for instructions on setting up logging intervals and transferring data to a PC.

6. Manutenzjoni

6.1 Tindif

Biex tnaddaf il-multimetru, imsaħ il-kaxxa b'adamp cloth and a mild detergent. Do not use abrasives or solvents. Ensure the device is powered off and leads are disconnected before cleaning.

6.2 Kalibrazzjoni

The U1272A is factory calibrated. For continued accuracy, periodic calibration by a qualified service center is recommended. Refer to Keysight's official support channels for calibration services.

6.3 Ħażna

Meta ma tkunx qed tużah għal perjodi twal, neħħi l-batteriji biex tevita t-tnixxija. Aħżen il-multimeter f'post frisk u niexef, 'il bogħod mix-xemx diretta u minn temperaturi estremi.

7 Issolvi l-problemi

For issues not listed here, or if solutions do not resolve the problem, contact Keysight customer support.

8. Speċifikazzjonijiet

9. Garanzija u Appoġġ

9.1 Informazzjoni dwar Garanzija

KEYSIGHT products are designed for professional use and come with a standard manufacturer's warranty. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official Keysight Technologies websit. Żomm il-prova tax-xiri tiegħek għal talbiet ta' garanzija.

9.2 Appoġġ għall-Klijent

For technical assistance, service, or calibration inquiries, please contact Keysight Technologies customer support. Visit www.keysight.com/us/en/support.html for contact information and resources.