Introduzzjoni
This manual provides comprehensive instructions for the AT&T EL52203 2 Handset Cordless Answering System with Caller ID/Call Waiting. Please read this manual thoroughly before operating your new telephone system to ensure proper setup and functionality.
Image: The AT&T EL52203 cordless answering system, featuring a base unit with integrated answering machine controls and two cordless handsets in their charging cradles. The handsets display a sample caller ID screen.
X'hemm fil-Kaxxa
Ivverifika li l-pakkett tiegħek fih l-oġġetti li ġejjin:
- One (1) Base Unit with Digital Answering System
- Two (2) Cordless Handsets
- Two (2) Handset Charging Cradles
- One (1) Telephone Line Cord
- One (1) AC Power Adapter for Base Unit
- Two (2) Rechargeable Lithium Ion Batteries for Handsets
- One (1) Wall Mount Bracket (optional)
Setup
1. Installazzjoni tal-batterija
- Iftaħ l-għatu tal-kompartiment tal-batterija fuq wara ta’ kull handset.
- Connect the battery pack plug securely into the jack inside the compartment.
- Place the battery pack with the label facing up.
- Agħlaq l-għatu tal-kompartiment tal-batterija.
2. Konnessjoni tal-Unità Bażi
- Plug the small end of the AC power adapter into the power jack on the back of the telephone base.
- Plug the large end of the AC power adapter into a wall outlet not controlled by a wall switch.
- Plug one end of the telephone line cord into the telephone jack on the back of the telephone base.
- Ipplaggja t-tarf l-ieħor tal-korda tat-telefon f'ġakk tat-telefon tal-ħajt.
3. Iċċarġjar tal-Idejn
Place each handset in its respective charging cradle or the telephone base. The CHARGE light on the handset will illuminate, indicating proper charging. Allow the handsets to charge for at least 16 hours before first use for optimal battery performance.
Istruzzjonijiet Operattivi
Jagħmel u Jirċievi Sejħiet
- Biex Tagħmel Sejħa: Agħfas TELEFON / FLASH or Kelliem, imbagħad ċempel in-numru.
- Biex Twieġeb Sejħa: Agħfas TELEFON / FLASH or Kelliem meta jdoqq it-telefon.
- Biex Intemm Sejħa: Agħfas MITFI/KANNELLA or place the handset in the cradle.
Sistema ta' Tweġiba Diġitali
The answering system can record messages when you are away. The message counter on the base unit displays the number of new messages.
- Biex Tilgħab Messaġġi: Agħfas PLAY/WAQQAF fuq l-unità bażi.
- To Delete Current Message: Agħfas Ħassar waqt daqq tal-messaġġ.
- To Turn Answering System On/Off: Agħfas ANS ON/OFF fuq l-unità bażi.
Caller ID/Call Waiting
This phone supports Caller ID and Call Waiting features. Caller ID information will display on the handset screen after the first ring. If you subscribe to Call Waiting, you will hear a tone if another call comes in while you are on the phone. Press TELEFON / FLASH biex taqleb bejn sejħiet.
Speakerphone tal-idejn
Biex tuża l-funzjoni tal-ispikerphone waqt telefonata, agħfas il-buttuna Kelliem buttuna fuq il-handset. Agħfasha mill-ġdid biex terġa' lura għall-earpiece.
Funzjoni Intercom
You can use the handsets to communicate with each other. Press INT on a handset, then dial the number of the desired handset (e.g., 1 or 2). Press MITFI/KANNELLA biex ittemm is-sejħa bl-intercom.
Manutenzjoni
Tindif
Clean the telephone and handsets with a soft, slightly damp cloth. Do not use cleaning sprays or abrasive cleaners as they may damage the finish or electrical components.
Kura tal-batterija
- To maintain optimal battery life, fully charge the handsets for 16 hours before initial use.
- Evita li tesponi l-batteriji għal temperaturi estremi.
- Jekk it-telefon ma se jintużax għal perjodu twil ta' żmien, neħħi l-batteriji mill-handsets.
Issolvi l-problemi
| Problema | Soluzzjoni |
|---|---|
| L-ebda ton tal-arloġġ. | Ensure the telephone line cord is securely plugged into both the base unit and the wall jack. Check if the AC power adapter is properly connected. |
| Il-mowbajl ma jiċċarġjax. | Verify the handset is correctly seated in the charging cradle. Clean the charging contacts on both the handset and cradle with a dry cloth. Ensure the power adapter for the base unit is plugged in. |
| Cannot hear messages on answering system. | Adjust the volume on the base unit using the VOLUME + / - buttons. Ensure the answering system is turned ON. |
| L-ID tas-sejjieħ mhux qed jintwera. | Ensure you subscribe to Caller ID service from your telephone service provider. |
Speċifikazzjonijiet
- Mudell: EL52203
- Teknoloġija: Teknoloġija Diġitali DECT 6.0
- Handsets: 2 Handsets mingħajr Fili
- Sistema ta' Tweġiba: Diġitali
- ID tas-Sejħiet/Sejħa ta' Stennija: Iva
- Speakerphone: Speakerphone tal-idejn
- Batteriji: 2 batteriji tal-jone tal-litju (inklużi)
- Dimensjonijiet (Unità Bażi): Madwar 8.2 x 4.9 x 4.5 pulzieri
- Piż (Oġġett): Madwar 1.6 liri
- Kulur: Abjad
- Materjal: Plastik
Appoġġ u Garanzija
For technical support, product registration, or warranty information, please visit the official AT&T webis-sit jew ikkuntattja lis-servizz tal-klijenti ta' AT&T. Żomm l-irċevuta tax-xiri tiegħek bħala prova tax-xiri għal talbiet ta' garanzija.
Appoġġ onlajn: www.att.com/support
Manifattur: AT&T
