1. Introduzzjoni
This manual provides essential information for the proper setup, operation, and maintenance of your Behringer XENYX QX1222USB mixer. Please read this manual thoroughly before using the device to ensure optimal performance and safety.
Figura 1.1: Fuq view of the Behringer XENYX QX1222USB mixer, showing all controls and inputs.
2. Istruzzjonijiet Importanti dwar is-Sigurtà
Always follow these basic safety precautions when operating electronic equipment:
- Aqra dawn l-istruzzjonijiet.
- Żomm dawn l-istruzzjonijiet.
- Oqgħod attent għat-twissijiet kollha.
- Segwi l-istruzzjonijiet kollha.
- Tużax dan l-apparat ħdejn l-ilma.
- Naddaf biss b'ċarruta niexfa.
- Timblokka l-ebda fetħiet tal-ventilazzjoni. Installa skond l-istruzzjonijiet tal-manifattur.
- Tinstallax ħdejn xi sorsi tas-sħana bħal radjaturi, reġistri tas-sħana, stufi, jew apparat ieħor (inkluż amplifiers) li jipproduċu sħana.
- M'għandekx tegħleb l-iskop tas-sigurtà tal-plagg polarizzat jew tat-tip ta 'l-ert. Plagg polarizzat għandu żewġ xfafar b'waħda usa 'mill-oħra. Plagg tat-tip ta 'l-ert għandu żewġ xfafar u t-tielet prong ta' l-ert. Ix-xafra wiesgħa jew it-tielet prong huma pprovduti għas-sigurtà tiegħek. Jekk il-plagg ipprovdut ma jidħolx fl-iżbokk tiegħek, ikkonsulta elettriċista għas-sostituzzjoni tal-iżbokk skadut.
- Ipproteġi l-korda tad-dawl milli timxi fuqha jew maqrusa, partikolarment fil-plakek, ir-reċipjenti tal-konvenjenza, u l-punt fejn joħorġu mill-apparat.
- Uża biss aċċessorji/aċċessorji speċifikati mill-manifattur.
- Uża biss mal-karrettun, stand, tripod, bracket, jew mejda speċifikati mill-manifattur, jew mibjugħa mal-apparat. Meta jintuża karrettun, uża l-kawtela meta ċċaqlaq il-kombinazzjoni tal-karrettun/apparat biex tevita korriment minn qlib.
- Aqla’ dan l-apparat waqt maltempati tas-sajjetti jew meta ma jintużax għal perjodi twal ta’ żmien.
3. Karatteristiċi ewlenin
The Behringer XENYX QX1222USB mixer offers a comprehensive set of features designed for professional audio mixing and recording:
- Premium ultra-low noise, high headroom mixer design.
- 4 XENYX Mic Pre tal-istat l-aktar avvanzat, li jaħdem bil-fantażmaamps, comparable to stand-alone boutique preamps.
- 4 kompressuri ta' grad ta' studio b'funzjonalità super faċli ta' "pum wieħed" u kontroll LED għal ħoss vokali u strumentali professjonali.
- Ultra-high quality KLARK TEKNIK FX processor with LCD display, dual-parameters, Tap function, and storable user parameter settings.
- "Wireless-ready" for high-quality BEHRINGER digital wireless system (system not included).
Figure 3.1: Illustrates microphone input, highlighting the quality of XENYX Mic Preamps.
Figure 3.2: Visual representation of audio compression, demonstrating the effect of the built-in compressors.
Figura 3.3: Eżample of a Klark Teknik effects processor, representing the integrated multi-FX unit.
4. Gwida ta' Setup
4.1 Spakkjar u Tqegħid
Carefully unpack your mixer and inspect it for any signs of damage. Place the mixer on a stable, flat surface, ensuring adequate ventilation around the unit. Avoid placing it near heat sources or in direct sunlight.
4.2 Konnessjoni tal-Enerġija
Connect the supplied power cable to the mixer's power inlet and then to a suitable AC power outlet. Ensure the power switch is in the OFF position before connecting. The mixer also features a separate phantom power switch for condenser microphones.
Figure 4.1: Rear panel connections, including power input and USB interface.
4.3 Konnessjonijiet tal-Awdjo
Connect your microphones, instruments, and other audio sources to the appropriate input channels. Use XLR cables for microphones and 1/4-inch TRS/TS cables for line-level instruments. Connect your main output to your amplifier or powered speakers using XLR or 1/4-inch cables.
4.4 Konnessjoni tal-Interfaċċja tal-Awdjo USB
To use the built-in USB audio interface, connect a USB cable from the mixer's USB port to your computer. Install any necessary drivers or software as prompted by your operating system or as specified by Behringer's support websit.
Figure 4.2: USB interface logo, indicating connectivity for recording and playback.
5. Istruzzjonijiet Operattivi
5.1 Fluss Bażiku tas-Sinjali
Audio signals enter through the input channels, pass through the preamp, EQ, and compressor sections, then are routed to the main mix, auxiliary sends, or USB interface. The main mix is controlled by the MAIN MIX faders.
5.2 Kontrolli tal-Kanal
- QLIGĦ: Jaġġusta s-sensittività tad-dħul għal kull kanal.
- COMP: Controls the amount of compression applied to the channel.
- EQ: High, Mid, and Low controls to shape the tone of each channel.
- AUX/FX: Sends signal to external effects or monitor mixes.
- PAN/BAL: Positions the signal in the stereo field.
- MUTE: Jissikket il-kanal.
- FADER TAL-LIVELL: Jaġġusta l-livell tal-ħruġ tal-kanal għat-taħlita prinċipali.
5.3 Klark Teknik FX Processor
The integrated Klark Teknik FX processor offers a variety of effects. Use the PROGRAM knob to select an effect and the PARAMETER knob to adjust its settings. The TAP button can be used for tempo-based effects.
5.4 USB Audio Interface
The USB interface allows for stereo recording of the main mix to your computer and stereo playback from your computer through the mixer. Ensure your computer's audio settings are configured to use the XENYX QX1222USB as the input/output device.
Figura 5.1: Eżample of a Digital Audio Workstation (DAW) for recording and playback via USB.
6. Manutenzjoni
6.1 Tindif
Regularly clean the mixer's exterior with a soft, dry cloth. Avoid using abrasive cleaners, solvents, or waxes, as these can damage the finish and controls. Do not allow liquids to enter the mixer.
6.2 Ħażna
When not in use for extended periods, store the mixer in a cool, dry place, away from direct sunlight and extreme temperatures. Consider covering the unit to protect it from dust.
7 Issolvi l-problemi
If you encounter issues with your XENYX QX1222USB mixer, refer to the following common problems and solutions:
- Ebda Qawwa: Ensure the power cable is securely connected and the power switch is ON. Check the power outlet.
- Ebda Ħsejjes tal-Ħsejjes: Verify all faders (channel, main mix) are up. Check input gain settings. Ensure speakers/amplifier are connected and powered on. Check monitor and FX send levels if applicable.
- Ħoss Mgħawġ: Reduce input gain (GAIN knob) to prevent clipping. Check for proper impedance matching of connected devices.
- L-Awdjo USB Mhux Jaħdem: Confirm USB cable connection. Check computer's audio input/output settings. Ensure necessary drivers are installed.
- Effects Not Heard: Ensure FX send levels on channels are up, and the FX return level is up. Check the selected effect program.
For more complex issues, consult the Behringer support websit jew ikkuntattja lis-servizz tal-konsumatur.
8. Speċifikazzjonijiet Tekniċi
| Karatteristika | Speċifikazzjoni |
|---|---|
| Piż tal-oġġett | 8.38 liri (3.8 kg) |
| Dimensjonijiet tal-Prodott | 13.31 x 14.57 x 3.54 pulzieri (33.8 x 37 x 9 ċm) |
| Numru tal-Mudell tal-Oġġett | QX1222USB |
| Interface tal-Ħardwer | USB |
| Sors tal-Enerġija | Corded Elettriku |
| Brand | Behringer |
| Numru ta 'Kanali | 16 |
| Teknoloġija tal-Konnettività | USB |
| L-Ewwel Data Disponibbli | 1 ta’ Mejju, 2013 |
9. Garanzija u Appoġġ
Għal informazzjoni dettaljata dwar il-garanzija u appoġġ tekniku, jekk jogħġbok żur is-sit uffiċjali ta' Behringer websit jew ikkuntattja lid-distributur lokali ta' Behringer tiegħek. Żomm l-irċevuta tax-xiri tiegħek bħala prova tax-xiri għal kwalunkwe talba ta' garanzija.
