REELY Carbon Fighter III 1:6 RC Gasoline Model Vehicle Instruction Manual

Introduzzjoni

Welcome to the instruction manual for your REELY Carbon Fighter III 1:6 RC Gasoline Model Vehicle. This high-performance 2WD rear buggy is designed for off-road enthusiasts, featuring a powerful 1.6 hp gasoline engine, an improved conical wheel differential, and new high-grip off-road tires for superior traction. The 2.4 GHz remote control system ensures reliable operation. Please read this manual thoroughly before operating your model to ensure safe and optimal performance.

Image: The REELY Carbon Fighter III RC Buggy shown alongside its 2.4 GHz remote control unit.

Setup

Before operating your Carbon Fighter III, ensure all necessary components are prepared and installed correctly.

Oġġetti Meħtieġa (Mhux Inklużi):

• Batterija tar-riċevitur: A 6V Hump Pack battery with Sub-C cells (e.g., Conrad part numbers 206976 or 206975).
• Ċarġer tal-batterija: A compatible charger (e.g., Conrad part number 1460625) with a Tamiya / BEC adapter (e.g., Conrad part number 208430) for the receiver battery.
• Karburant: A 1:25 fuel mixture. This is prepared by mixing 1.0 liter of Super gasoline or Super Plus with 40 ml of 2-stroke oil (e.g., Conrad part number 893267). Important: Do not use E10 fuel.

Initial Checks and Assembly:

While the Carbon Fighter III is designed as a Ready-to-Run (RTR) model, it is crucial to perform a thorough inspection before first use.

1. Spakkjar: Carefully remove the model and all accessories from the packaging.
2. Spezzjoni Viżwali: Check for any visible damage during shipping. Ensure all parts are securely fastened.
3. Engine and Drivetrain: Verify that the engine and drivetrain components (including the differential) are correctly assembled and move freely. Some users have reported initial assembly issues, so a careful check of the motor and drive train is recommended to prevent potential damage.
4. Sistema tar-Radju: Install batteries in the 2.4 GHz remote control. Power on the remote control first, then the vehicle. Ensure proper binding and functionality of steering and throttle controls.
5. Tank tal-Fjuwil: Fill the fuel tank with the prepared 1:25 gasoline-oil mixture.
6. Tajers: Ensure tires are properly mounted and inflated to the recommended pressure (if applicable, check tire sidewall for details).

Istruzzjonijiet Operattivi

The REELY Carbon Fighter III is built for dynamic off-road driving.

Tibda tal-Magna:

1. Ensure the remote control is powered on and linked to the vehicle.
2. Locate the pull-start mechanism on the engine.
3. Apply a small amount of throttle on the remote control (if necessary, refer to engine-specific starting procedures).
4. Pull the starter cord firmly and smoothly until the engine starts. Do not over-pull.
5. Allow the engine to warm up for a short period before driving.

Sewqan tal-Vettura:

Your Carbon Fighter III features rear-wheel drive (2WD) for exciting power drifts and excellent off-road performance.

• Kontroll tat-throttle: Use the throttle trigger on the remote control to accelerate (push forward) and brake/reverse (pull back).
• Kontroll tal-Istering: Uża l-istering fuq il-kontroll remot biex iddawwar ir-roti ta’ quddiem lejn ix-xellug jew il-lemin.
• Prestazzjoni Off-Road: The new high-grip off-road tires provide excellent traction on various surfaces. The 2WD system allows for controlled power slides and drifts, enhancing the driving experience.
• Terren: Ideal for grass, dirt, gravel, and other unpaved surfaces. Avoid deep water or extremely muddy conditions.

Image: The REELY Carbon Fighter III in action, kicking up dust on a dirt track, showcasing its off-road capabilities.

Manutenzjoni

Regular maintenance is crucial for the longevity and performance of your REELY Carbon Fighter III.

• Wara Kull Użu:
  • Clean the vehicle thoroughly to remove dirt, dust, and debris, especially from moving parts and the engine cooling fins.
  • Inspect for loose screws, nuts, or damaged parts. Tighten or replace as necessary.
  • Check the air filter and clean or replace if dirty.
  • Empty the fuel tank if storing for an extended period to prevent fuel degradation.
• Manutenzjoni tal-Magna:
  • Periodically check the spark plug and replace if fouled.
  • Ensure proper engine tuning for optimal performance and longevity. Refer to engine-specific tuning guides if needed.
• Drivetrain and Differential:
  • Regularly inspect the improved conical wheel differential for smooth operation and proper lubrication.
  • Check gears for wear and tear.
• Sospensjoni u Steering:
  • Inspect shock absorbers for leaks and proper damping.
  • Check steering linkages for free movement and no excessive play.
• Tajers:
  • Inspect high-grip off-road tires for wear, cuts, or punctures.
  • Kun żgur li l-ġewż tar-roti huma ssikkati.

Issolvi l-problemi

Din it-taqsima tipprovdi soluzzjonijiet għal kwistjonijiet komuni li tista’ tiltaqa’ magħhom.

Speċifikazzjonijiet

Garanzija u Appoġġ

REELY products are designed for durability and performance.

• Disponibbiltà ta' Spare Parts: Spare parts for the Carbon Fighter III are generally available for a period of 1 year from the date of purchase.
• Garanzija Limitata: For specific warranty terms and conditions, please refer to the documentation included with your purchase or contact REELY customer support directly.
• Appoġġ għall-Klijent: For technical assistance, troubleshooting beyond this manual, or spare parts inquiries, please visit the official REELY websit jew ikkuntattja lill-bejjiegħ bl-imnut tiegħek.

Image: The official REELY brand logo.