KanexPro Adjustable Tilt Wall Mount Instruction Manual

Introduzzjoni

This manual provides comprehensive instructions for the safe and proper installation and operation of your KanexPro Adjustable Tilt Wall Mount. Please read this manual thoroughly before installation and retain it for future reference. This high-quality tilting wall mount bracket is designed for compatible televisions, offering a secure and adjustable viewing esperjenza.

Informazzjoni dwar is-Sigurtà

TWISSIJA: Failure to read and follow these instructions may result in serious personal injury, property damage, or voiding of your warranty. If you do not understand these instructions, or have doubts about the safety of the installation, please contact a qualified installer.

• Do not install this product on walls that are not structurally sound. Ensure the mounting surface can safely support the combined weight of the mount and the display.
• Always use a stud finder to locate wooden studs. If mounting to concrete, ensure appropriate anchors are used.
• Teċċedix il-kapaċità massima tal-piż ta' 165 lbs (75 kg).
• This mount is designed for indoor use only.
• Żomm partijiet żgħar 'il bogħod mit-tfal.
• Dejjem ikun hemm mill-inqas żewġ persuni għall-installazzjoni biex jiġu evitati korrimenti jew ħsara.

Kontenut tal-Pakkett

Please verify that all components are present and undamaged before installation. If any parts are missing or defective, contact KanexPro customer support.

• Assemblea tal-Pjanċa tal-Ħajt
• TV Bracket Arms (2)
• Kit tal-Ħardwer tal-Immuntar (diversi viti, woxers, spacers, ankri)
• Istruzzjonijiet għall-Installazzjoni (dan il-manwal)

Image: The main components of the KanexPro wall mount, showing the wall plate and two vertical TV bracket arms.

Setup u Installazzjoni

Għodod Meħtieġa (Mhux Inklużi): Pencil, Drill, Phillips Head Screwdriver, Level, Stud Finder, Measuring Tape, Hammer (for concrete anchors).

Pass 1: Waħħal il-Parentesi tat-TV mat-TV

1. Poġġi t-TV tiegħek b'attenzjoni wiċċu 'l isfel fuq wiċċ artab u nadif biex tevita li l-iskrin isir ħsara.
2. Identifika t-toqob tal-immuntar tal-VESA fuq wara tat-TV tiegħek.
3. Agħżel il-viti, il-woxers, u l-ispejsers xierqa mill-kit tal-ħardwer li jaqblu mat-toqob tal-immuntar tat-TV tiegħek.
4. Attach the two TV bracket arms to the back of your TV, ensuring they are vertically aligned and securely fastened. The hooks on the bracket arms should face downwards.

Step 2: Mount Wall Plate to Wall

1. Determine the desired height for your TV. Hold the wall plate against the wall and mark the top and bottom center points.
2. Use a stud finder to locate two adjacent wooden studs. Mark the center of each stud. The wall plate is designed to span two studs.
3. Position the wall plate against the wall, aligning the mounting holes with the marked stud centers. Use a level to ensure the wall plate is perfectly horizontal.
4. Mark the drill points through the holes on the wall plate.
5. Drill pilot holes at the marked locations. For wood studs, use a smaller drill bit than the lag bolts. For concrete, use a masonry drill bit and insert concrete anchors.
6. Secure the wall plate to the wall using the provided lag bolts and washers. Tighten firmly, but do not overtighten.

Image: Technical diagram illustrating the VESA compatibility ranges (min/max) for both horizontal and vertical dimensions, along with the overall measurements of the wall plate (32" wide x 8 7/8" high).

Pass 3: Iddendel it-TV fuq il-Pjattaforma tal-Ħajt

1. Bl-għajnuna, erfa’ t-TV bir-reqqa bil-parentesi mwaħħla.
2. Align the hooks on the TV bracket arms with the top edge of the wall plate.
3. Gently lower the TV, ensuring the hooks engage securely with the wall plate.
4. Once the TV is hanging, locate the safety screws or locking mechanisms on the bottom of the TV bracket arms. Tighten these to secure the TV to the wall plate and prevent accidental dislodging.
5. Verify that the TV is level and securely mounted.

Immaġni: Angolata view of the KanexPro wall mount, highlighting the robust construction and the tilting mechanism on the bracket arms.

Operating the Tilt Feature

This wall mount features a variable downward tilt from 0° to -15°.

1. To adjust the tilt, locate the tilt adjustment knobs or bolts on the side of each TV bracket arm.
2. Loosen these knobs/bolts slightly.
3. Carefully tilt the bottom of your TV forward or backward to achieve the desired viewangolu tal-ing.
4. Once the desired angle is set, firmly tighten the tilt adjustment knobs/bolts to secure the TV in place.

Manutenzjoni

Manutenzjoni regolari tiżgura l-lonġevità u t-tħaddim sikur tal-muntatura tal-ħajt tiegħek.

• Tindif: Imsaħ il-muntatura b'ċarruta ratba u niexfa. Tużax prodotti tat-tindif jew solventi li joborxu.
• Kontroll Perjodiku: Periodically check all screws and bolts to ensure they remain tight and secure. Retighten if necessary.
• Ħsara: If any part of the mount appears damaged or worn, do not use it. Contact KanexPro for replacement parts or professional assistance.

Issolvi l-problemi

Speċifikazzjonijiet

• Numru tal-Mudell: K-WALLM-14-BLK-0847
• Tip ta 'Immuntar: Mount Wall
• Tip ta' Moviment: Mejjel
• Materjal: Azzar Liga
• Kulur: Black scratch resistant finish
• Kapaċità massima tal-piż: 165 lbs (75 kg)
• Tilt Feature: 0° to -15° Degrees (Variable Downward Tilt)
• Maximum Compatible TV Size: 51 Pulzier
• Apparati Kompatibbli: Televiżjoni
• Piż tal-oġġett: 13 liri (madwar 5.9 kg)

Garanzija u Appoġġ

For warranty information and customer support, please refer to the KanexPro official website or contact their customer service department directly. Please have your model number (K-WALLM-14-BLK-0847) and purchase details ready when contacting support.

Manifattur: KanexPro