My Weigh SCMVOXEVOL Talking Kitchen Scale User Manual

Introduzzjoni

This manual provides comprehensive instructions for the setup, operation, maintenance, and troubleshooting of your My Weigh SCMVOXEVOL Talking Kitchen Scale. Please read this manual thoroughly before using the scale to ensure proper function and longevity.

Immaġni: My Weigh SCMVOXEVOL Talking Kitchen Scale. This image displays the My Weigh SCMVOXEVOL Talking Kitchen Scale. It features a silver weighing platform and a dark gray base. The digital display shows '0.000 g'. Below the display are four prominent buttons: 'TARE', 'MODE', 'OFF', and 'ON'. The scale's design is compact and functional.

Setup

1. Installazzjoni tal-batterija

1. Sib il-kompartiment tal-batterija fuq in-naħa ta' taħt tal-iskala.
2. Iftaħ l-għatu tal-kompartiment tal-batterija.
3. Insert 4 AA batteries, ensuring correct polarity (+/-). The scale typically includes batteries.
4. Agħlaq l-għatu tal-kompartiment tal-batterija sew.

2 Tqegħid

Place the scale on a flat, stable, and level surface to ensure accurate measurements. Avoid placing it near strong electromagnetic fields or areas with significant vibrations.

Istruzzjonijiet Operattivi

1. Power On/Off

• Biex iddawwar l-iskala ON, agħfas il- ON button. The scale will announce "Hello" and display "0.000 g" or the last used unit.
• Biex iddawwar l-iskala OFF, agħfas il- OFF button. The scale will announce "Goodbye".

2. Użin tal-Oġġetti

1. Ensure the scale is on a stable surface and powered on, displaying "0.000 g".
2. Poġġi bil-mod l-oġġett li se jintiżen fiċ-ċentru tal-pjattaforma tal-użin.
3. The display will show the weight, and the scale will announce the weight if the talking feature is enabled.
4. Remove the item once the measurement is complete.

3. Funzjoni tat-Tara

The Tare function allows you to weigh items in a container by subtracting the container's weight.

1. Place an empty container on the weighing platform. The display will show its weight.
2. Agħfas il- TARE button. The display will reset to "0.000 g", effectively zeroing out the container's weight.
3. Add the items you wish to weigh into the container. The display will show only the net weight of the added items.
4. To clear the Tare function, remove all items and the container from the platform, then press TARE again if the display does not return to zero automatically.

4. Unit Conversion (MODE)

The scale can measure in different units, typically grams (g) and ounces (oz).

• Agħfas il- MODALITÀ button to cycle through available weighing units.
• The display will indicate the currently selected unit.

5. Talking Feature and Volume Control

The SCMVOXEVOL scale features a talking function that announces measurements. This feature can be enabled or disabled, and the volume adjusted.

• On the underside of the scale, locate two slide switches.
• The switch closer to the front of the scale controls the Volum. Slide it to adjust between available volume levels (e.g., loud, very loud).
• The second switch controls the Voice On/Off function. Slide it to enable or disable the talking feature.
• When both switches are slid to the outside edge, the voice will be on and set to the highest volume.

6. Kalibrazzjoni

The scale is factory-calibrated. However, if you suspect inaccuracies or are operating at a significantly different altitude, calibration may be necessary. Refer to the full product documentation or manufacturer's website for detailed calibration procedures, as this typically requires specific calibration weights.

Manutenzjoni

1. Tindif

• Imsaħ il-wiċċ tal-iskala b'ċarruta ratba u damp drapp.
• Tużax prodotti tat-tindif li joborxu jew tgħaddasx l-iskala fl-ilma.
• Kun żgur li l-iskala tkun niexfa qabel ma taħżenha jew qabel l-użu li jmiss.

2. Ħażna

Store the scale in a clean, dry environment. Avoid placing heavy objects on the weighing platform during storage, as this can affect its accuracy over time.

3. Sostituzzjoni tal-batterija

If the display becomes dim or the scale functions erratically, replace all 4 AA batteries with new ones. Remove batteries if the scale will not be used for an extended period to prevent leakage.

Issolvi l-problemi

• L-iskala ma tixgħelx:
  • Iċċekkja jekk il-batteriji humiex installati sew bil-polarità xierqa.
  • Ibdel batteriji qodma b'oħrajn ġodda.
• Inaccurate readings or "Error" message:
  • Kun żgur li l-iskala tkun fuq wiċċ ċatt u stabbli.
  • Remove any objects from the platform before turning on or taring.
  • Avoid overloading the scale beyond its maximum capacity.
  • Recalibration may be required (refer to calibration section).
• Talking feature not working:
  • Check the Voice On/Off switch on the underside of the scale.
  • Adjust the volume switch.
  • Kun żgur li l-batteriji għandhom biżżejjed qawwa.

Speċifikazzjonijiet

Informazzjoni dwar Garanzija

My Weigh products typically come with a manufacturer's warranty. For specific details regarding the warranty period and terms for your SCMVOXEVOL scale, please refer to the warranty card included with your purchase or visit the official My Weigh websit. Żomm il-prova tax-xiri tiegħek għal kwalunkwe talba ta' garanzija.

Appoġġ għall-Klijent

For further assistance, technical support, or inquiries not covered in this manual, please contact My Weigh customer service. Contact information can usually be found on the product packaging or the manufacturer's official websit.