Mayer Swivel Chair User Manual

1. Introduzzjoni

Thank you for choosing the Mayer Swivel Chair. This manual provides detailed instructions for the assembly, operation, maintenance, and troubleshooting of your new office chair. Please read this manual carefully before assembly and use to ensure proper function and longevity of the product. Keep this manual for future reference.

2. Informazzjoni dwar is-Sigurtà

• Kun żgur li l-komponenti kollha huma mwaħħla sew qabel l-użu.
• Toqgħodx fuq is-siġġu.
• Tużax is-siġġu jekk xi partijiet ikunu bil-ħsara jew neqsin.
• Maximum recommended load capacity is 110 kg. Do not exceed this weight.
• Keep children away from the chair during assembly. Small parts may be a choking hazard.
• Use the chair on a level surface to prevent tipping.

3. Kontenut tal-Pakkett

Jekk jogħġbok ivverifika li l-partijiet kollha huma preżenti qabel tibda l-assemblaġġ. Jekk xi partijiet huma neqsin jew bil-ħsara, ikkuntattja l-appoġġ għall-klijenti.

• Seat cushion (1)
• Backrest with mesh (1)
• Serħan għar-ras (1)
• Armrests (2)
• Star base (1)
• Xandara (5)
• Gas lift cylinder (1)
• Mechanism plate (1)
• Hardware pack (screws, washers, Allen key)

4. Istruzzjonijiet tal-Assemblea

Assembly is required for this product. Follow these steps carefully. It is recommended to assemble the chair on a soft, clean surface to prevent scratches.

1. Waħħal ir-Roti mal-Bażi: Daħħal il-ħames roti fit-toqob fit-tarf ta’ kull sieq tal-bażi tal-istilla. Imbotta sew sakemm jidħlu f’posthom.
2. Daħħal il-Gass Lift: Poġġi ċ-ċilindru tal-irfigħ tal-gass fit-toqba taċ-ċentru tal-bażi tal-istilla mmuntata.
3. Waħħal il-Mekkaniżmu mas-Sedil: Align the mechanism plate with the pre-drilled holes on the underside of the seat cushion. Secure it using the provided screws and Allen key. Ensure the front of the mechanism faces the front of the seat.
4. Waħħal Armrests: Secure the armrests to the sides of the seat cushion using the provided screws. Do not overtighten initially.
5. Waħħal id-Dahar: Connect the backrest to the mechanism plate or seat frame using the designated screws. Adjust the armrests if necessary to align with the backrest attachment points, then tighten all armrest screws.
6. Waħħal ir-Rasrest: Slide the headrest into the slot at the top of the backrest. Adjust its height and inclination as desired.
7. Qabbad is-Sedil mal-Lift tal-Gass: Carefully place the assembled seat and backrest onto the gas lift cylinder, ensuring it is centered. Apply downward pressure to secure it.

Figure 4.1: Fully assembled Mayer Swivel Chair, showcasing its ergonomic design and components.

5. Istruzzjonijiet Operattivi (Aġġustamenti)

Your Mayer Swivel Chair offers several adjustment options to customize your seating experience for optimal comfort and support.

• Aġġustament tal-Għoli tas-Sedil: Locate the lever on the right side beneath the seat. Pull the lever up to raise the seat. To lower, pull the lever up while seated. Release the lever at the desired height. The seat height range is approximately 47-56 cm.
• Backrest Tilt and Lock: The chair features a synchronous mechanism. Use the lever on the left side beneath the seat to adjust the backrest tilt. Pull the lever out to allow the backrest to recline freely. Push the lever in to lock the backrest in an upright or reclined position.
• Individual Weight Adjustment: A knob located beneath the seat (usually at the front or center) allows you to adjust the tension of the backrest tilt. Turn clockwise to increase tension (for heavier users) and counter-clockwise to decrease tension (for lighter users).
• Aġġustament tal-Fond tas-Sedil: Some models feature a seat depth adjustment. Look for a lever or button on the side of the seat. Activate it to slide the seat forward or backward, then release to lock.
• Aġġustament tad-dirgħajn: The armrests are height and depth adjustable. Locate the buttons or levers on the armrests. Press or lift to adjust the height, and slide the armrest pad forward or backward for depth adjustment. Release to lock.
• Aġġustament tal-serħan tar-ras: The headrest can be adjusted for both height and inclination. Gently pull or push the headrest to move it up or down, and tilt it to find your preferred angle.
• Aġġustament tal-Appoġġ Lumbari: The chair includes height-adjustable lumbar support. Locate the mechanism on the backrest and slide it up or down to position the support correctly for your lower back.

6. Manutenzjoni u Kura

Proper care will extend the life and appearance of your Mayer Swivel Chair.

• Tindif: Imsaħ nadif bl adamp cloth. For stubborn stains on fabric, use a mild upholstery cleaner according to its instructions. Avoid harsh chemicals or abrasive cleaners.
• Spezzjoni: Iċċekkja l-viti u l-boltijiet kollha perjodikament biex tiżgura li huma ssikkati. Erġa' ssikkahom jekk meħtieġ.
• Xandara: Żomm ir-roti ħielsa minn xagħar u debris biex tiżgura li jirrumblaw bla xkiel.
• Evita dawl tax-xemx dirett: Prolonged exposure to direct sunlight can cause fading of fabric and plastic components.

7 Issolvi l-problemi

8. Speċifikazzjonijiet

• Mudell: Swivel Chair B00C193C8U
• Ditta: Mayer
• Materjal: Plastic (back), Fabric (seat), Aluminum (frame/base)
• Kulur: Iswed
• Piż tal-oġġett: 35 kg
• Tagħbija Massimu Rakkomandata: 110 kg
• Medda ta' Għoli tas-Sedil: 47-56 ċm
• Karatteristiċi: Adjustable Height, Rolling, Adjustable Headrest, Adjustable Lumbar Support, Swivel Armrests, Synchronous Mechanism
• Assemblaġġ Meħtieġa: Iva
• Istruzzjonijiet għall-Kura: Imsaħ Nadif

9. Garanzija u Appoġġ

Għal informazzjoni dwar il-garanzija jew appoġġ tekniku, jekk jogħġbok ikkuntattja lill-bejjiegħ tiegħek jew lill-manifattur direttament. Żomm l-irċevuta tax-xiri tiegħek bħala prova tax-xiri.

Manufacturer: Mayer